References
- Ritchie PA, Thomas DA, Lu LW, et al. External reinforcement of concrete beams using fiberglass reinforced plastics. ACI Struct J. 1991;88:490–500.
- Buyukozturk O, Hearing B. Failure behavior of precracked concrete beams retrofitted with FRP. J Compos Constr. 1998;2:138–144.10.1061/(ASCE)1090-0268(1998)2:3(138)
- Lopez Acevedo MDM. Study of the flexural behavior of reinforced concrete beams strengthened by externally bonded fiber reinforced polymeric (FRP) laminates [Doctoral dissertation]. Ann Arbor: The University of Michigan; 2000.
- Malek A, Saadatmanesh H, Ehsani M. Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end. ACI Struct J. 1998;95:142–152.
- Wu Z, Matsuzaki T, Tanabe K. Interface crack propagation in FRP-strengthened concrete structures. In Non-Metallic (FRP) Reinforcement for Concrete Structures. Japan Concrete Institute; 1997; vol. 1, p. 319–326.
- Meier U, Kaiser HP. Strengthening of structures with CFRP laminates. In Proceeding of the Conference on Advanced Composites Materials in Civil Engineering; ASCE; 1991, p. 224–232.
- Leung CKY. Delamination failure in concrete beams retrofitted with a bonded plate. J Mater Civ Eng. 2001;13:106–113.10.1061/(ASCE)0899-1561(2001)13:2(106)
- Täljsten B. Strengthening of beams by plate bonding. J Mater Civ Eng. 1997a;9:206–212.10.1061/(ASCE)0899-1561(1997)9:4(206)
- Khalifa A, Gold WJ, Nanni A, et al. Contribution of externally bonded FRP to shear capacity of RC flexural members. J Compos Constr. 1998;2:195–202.10.1061/(ASCE)1090-0268(1998)2:4(195)
- Triantafillou TC, Plevris N. Strengthening of RC beams with epoxy-bonded fibre-composite materials. Mater Struct. 1992;25:201–211.10.1007/BF02473064
- Spadea G, Bencardino F, Swamy RN. Structural behavior of composite RC beams with externally bonded CFRP. ASCE J Compos Constr. 1998;2:132–137.10.1061/(ASCE)1090-0268(1998)2:3(132)
- Ali-Ahmad M, Subramaniam KV, Ghosn M. Analysis of scaling and instability in FRP-concrete shear debonding for beam-strengthening applications. J Eng Mech. 2007;133:58–65.10.1061/(ASCE)0733-9399(2007)133:1(58)
- Norris T, Saadatmanesh H, Ehsani M. Shear and flexural strengthening of R/C beams with carbon fiber sheets. J Struct Eng. 1997;123:903–911.10.1061/(ASCE)0733-9445(1997)123:7(903)
- Arduini M, Nanni A. Parametric study of beams with externally bonded FRP reinforcement. ACI Struct J. 1997;94:493–501.
- Arduini M, Di Tommaso A, Nanni A. Brittle failure in FRP plate and sheet-bonded beams. ACI Struct J. 1997;94:363–370.
- Täljsten B. Defining anchor lengths of steel and CFRP plates bonded to concrete. Int J Adhes Adhes. 1997b;17:319–327.10.1016/S0143-7496(97)00018-3
- Ali-Ahmad M, Subramaniam KV, Ghosn M. Experimental investigation and fracture analysis of debonding between concrete and FRP sheets. J Eng Mech. 2006;132:914–923.10.1061/(ASCE)0733-9399(2006)132:9(914)
- Carloni C, Subramaniam KV. Direct determination of cohesive stress transfer during debonding of FRP from concrete. Compos Struct. 2010;93:184–192.10.1016/j.compstruct.2010.05.024
- Carloni C, Subramaniam KV. Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis. Compos Part B Eng. 2013;51:35–43.10.1016/j.compositesb.2013.02.015
- Täljsten B. Strengthening of concrete prisms using the plate-bonding technique. Int J Fract. 1996;82:253–266.10.1007/BF00013161
- Carloni C, Subramaniam KV. Application of fracture mechanics to debonding of FRP from RC members. ACI SP 286-10; 2012:1–20.
- Subramaniam KV, Carloni C, Nobile L. Width effect in the interface fracture during shear debonding of FRP sheets from concrete. Eng Fract Mech. 2007;74:578–594.10.1016/j.engfracmech.2006.09.002
- Subramaniam KV, Ali-Ahmad M, Ghosn M. Freeze–thaw degradation of FRP–concrete interface: impact on cohesive fracture response. Eng Fract Mech. 2008;75:3924–3940.10.1016/j.engfracmech.2007.12.016
- ASTM C 39. Standard test method for compressive strength of cylindrical concrete specimens. In Annual book of ASTM standards, concrete and aggregates, ASTM; 2000, p. 18–22.
- Ono K. Acoustic emission in materials research-a review. J. Acoust Emission. 2011;29:284–308.