References
- Kovalchenko AM, Fushchich OI, Danyluk S. The tribological properties and mechanism of wear of Cu-based sintered powder materials containing molybdenum disulfide and molybdenum diselenite under unlubricated sliding against copper. Wear. 2012;290–291(7):106–123.
- Watanable Y. High-speed sliding characteristics of Cu–Sn-based composite materials containing lamellar solid lubricants by contact resistance studies. Wear. 2008;264(7):624–631.
- Liu Z, Zu G, Luo H, et al. Influence of Mg addition on graphite particle distribution in the Al alloy matrix composites. J Mater Sci Technol. 2010;26(3):244–250.
- Wang Y, Pu J, Wang J, et al. Interlayer design for the graphite-like carbon film with high load-bearing capacity under sliding-friction condition in water. Appl Surf Sci. 2014;311(9):816–824.
- Diouf P, Jones A. Investigation of bong strength in centrifugal lining of babbit on cast iron. Metall Mater Trans A. 2010;41(3):603–609.
- Korobov YS, Nevezhin SV, Filippov MA, et al. Effect of production methods on tribological characteristics of babbit coating. J Frict Wear. 2012;33(3):190–194.
- Zeren A, Feyzullahoglu E, Zeren M. A study on tribological behavior of tin-based bearing material in dry sliding. Mater Des. 2007;28(1):318–323.
- Zhang Z, Duan S, Zhang H, et al. Microstructure and properties of arc spraying tin-based babbit alloy coating. Trans Chin Weld Inst. 2010;4:17–20. Chinese.
- Tan J, Chen J, Liu M, et al. Surface engineering towards green manufacturing and remanufacturing. J Mech Eng. 2011;47(20):95–103. Chinese.
- Lin SB, Song JL, Yang CL, et al. Spreading behavior and microstructure characteristics of dissimilar metals TIG welding–brazing of aluminum alloy to stainless steel. Mater Des. 2009;509(1–2):31–40.
- Li L, Tan C, Chen Y, et al. Comparative study on microstructure and mechanical properties of laser welded–brazed Mg/mild steel and Mg/stainless steel joints. Mater Des. 2013;43:59–65.
- Lin S, Song J, Yang C, et al. Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al–Cu filler metal. Mater Des. 2010;31(5):2637–2642.
- Lin S, Song J, Yang C, et al. Microstruture analysis of interfacial layer with tungsten insert gas welding-brazing joint of aluminum alloy to stainless steel. Acta Metall Sin. 2009;45(10):1211–1216. Chinese.
- Thompson RB, Thompson DO. Past experience in the development of tests for adhesive bond strength. J Adhes Sci Technol. 2012;5(8):583–599.
- Yang B, Chen G, Zhang K, et al. A review on measurement methods for interfacial bonding strength between coating and substrate. Adv Mech. 2007;37(1):67–79.
- Proano P, Pfeiffer P, Nergiz I, et al. Shear bond strength of repair resin using an intraoral tribochemical coating on ceramometal, ceramic, and resin surfaces. J Adhes Sci Technol. 2012;12(10):1121–1135.
- Zhao J, Song B, Mao J, et al. Study on precipitation of Sn in Fe–Sn alloy system. J Chin Rare Earth Soc. 2010;28:400–403. Chinese.
- Wang K, Lu W, Chen N, et al. Interaction between iron and molten tin. Shanghai Met. 2004;26(3):23–26.
- Lei J, Dong X, Zhao F, et al. Prediction of the primary intermetallic compound nanoparticles formed in Fe (Ni)–Sn system. Acta Metall Sin. 2008;44(8):922–926. Chinese.
- Li H, Huang Q, Wang J, et al. The activity coefficient of tin in solid solution of iron. Phys Pro. 2011;20:91–94.
- Ellis RA, Forder SD, English TH, et al. 57Fe conversion electron Mössbauer spectroscopy of factors influencing Fe–Sn intermetallic phase formation in tinplated steel. Hyperfine Interact. 2002;141(1):447–451.