References
- Breitzman TD, Iarve EV, Cook BM, et al. Optimization of a composite scarf repair patch under tensile loading. Compos Part A Appl Sci Manuf. 2009;40:1921–1930.10.1016/j.compositesa.2009.04.033
- Wang CH, Gunnion AJ. Optimum shapes of scarf repairs. Compos A. 2009;40:1409–1418.
- Duell JM, Wilson JM, Kessler MR. Analysis of a carbon composite overwrap pipeline repair system. Int J Press Vessels Pip. 2008;85:782–788.10.1016/j.ijpvp.2008.08.001
- Goland M, Reissner E. The stresses in cemented joints. J Appl Mech. 1944;11:A17–A27.
- Hart-Smith LJ. Further development in the design and analysis of adhesive bonded structural joints. ASTM STP. 1981;749:3–31.
- Adam R, Comyn J, Wake W. Structural adhesives joints in engineering. Berlin: Springer; 1997.
- Williams ML. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J Appl Mech. 1952;19:526–528.
- Bogy DB. Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions. J Appl Mech. 1971;38:377–386.10.1115/1.3408786
- Carpenter WC, Byers C. A path independent integral for computing stress intensities for V-notched cracks in a bi-material. Int J Fract. 1987;35:245–268.10.1007/BF00276356
- Reedy ED. Asymptotic interface corner solutions for butt tensile joints. Int J Solids Struct. 1993;30:767–777.10.1016/0020-7683(93)90039-A
- Munz D, Yang YY. Stresses near the edge of bonded dissimilar materials described by two stress intensity factors. Int J Fract. 1993;60:169–177.10.1007/BF00012444
- Akisanya AR, Meng CS. Initiation of fracture at the interface corner of bi-material joints. J Mech Phys Solids. 2003;51:27–46.10.1016/S0022-5096(02)00076-5
- Weißgraeber P, Leguillon D, Becker W. A review of finite fracture mechanics: crack initiation at singular and non-singular stress raisers. Arch Appl Mech. 2016;86:375–401.10.1007/s00419-015-1091-7
- Kelly PA, Hills DA, Nowell D. The design of joints between elastically dissimilar components (with special reference to ceramic/metal joints). J Strain Anal Eng Des. 1992;27:15–20.10.1243/03093247V271015
- Wang SS, Choi I. Boundary-layer effects in composite laminates: part 1 – free-edge stress singularities. J Appl Mech. 1982;49:541–548.10.1115/1.3162514
- Qian Z, Akisanya AR. An experimental investigation of failure initiation in bonded joints. Acta Mater. 1998;46:4895–4904.10.1016/S1359-6454(98)00200-6
- Yang YY, Munz D. Stress intensity factor and stress distribution in a joint with an interface corner under thermal and mechanical loading. Comput Struct. 1995;57:467–476.10.1016/0045-7949(94)00622-A
- van Tooren MJL, Gleich DM, Beukers A. Experimental verification of a stress singularity model to predict the effect of bondline thickness on joint strength. J Adhes Sci Technol. 2004;18:395–412.10.1163/156856104323016315
- Kumar S, Khan MA. A shear-lag model for functionally graded adhesive anchors. Int J Adhes Adhes. 2016;68:317–325.10.1016/j.ijadhadh.2016.04.010
- Wu Z. Design free of stress singularities for bi-material components. Compos Struct. 2004;65:339–345.10.1016/j.compstruct.2003.11.009
- Novozhilov V. On a necessary and sufficient criterion for brittle strength. J Appl Math Mech. 1969;33:201–210.10.1016/0021-8928(69)90025-2
- Seweryn A. Brittle fracture criterion for structures with sharp notches. Eng Fract Mech. 1994;47:673–681.10.1016/0013-7944(94)90158-9
- Yosibash Z, Bussiba A, Gilad I. Failure criteria for brittle elastic materials. Int J Fract. 2004;125:307–333.10.1023/B:FRAC.0000022244.31825.3b
- Leguillon D. Strength or toughness? A criterion for crack onset at a notch. Eur J Mech A Solids. 2002;21:61–72.10.1016/S0997-7538(01)01184-6
- Qian ZQ, Akisanya AR. Analysis of free-edge stress and displacement fields in scarf joints subjected to a uniform change in temperature. Fat Fract Eng Mater Struct. 1998;21:687–703.10.1046/j.1460-2695.1998.00041.x
- Reedy ED Jr. Intensity of the stress singularity at the interface corner of a bonded elastic layer subjected to shear. Eng Fract Mech. 1991;38:273–281.10.1016/0013-7944(91)90005-L
- Wang CH, Rose LRF. Compact solutions for the corner singularity in bonded lap joints. Int J Adhes Adhes. 2000;20:145–154.10.1016/S0143-7496(99)00032-9
- Ashby MF. Materials selection in mechanical design. 4th ed. Burlington, MA: Butterworth Heinemann; 2011.
- Arcan L, Arcan M, Daniel I. SEM fractography of pure and mixed mode interlaminar fracture in graphite/epoxy composites. ASTM STP. 1987;948:41–47.
- Stamoulis G, Carrere N, Cognard J-Y, et al. Investigating the fracture behavior of adhesively bonded metallic joints using the Arcan fixture. Int J Adhes Adhes. 2016;66:147–159.10.1016/j.ijadhadh.2016.01.001
- Akisanya AR, Fleck NA. Brittle fracture of adhesive joints. Int J Fract. 1992;58:93–114.10.1007/BF00019971