Preparation and performance of slag-based binders for the cementation of fine tailings

References

• Ghose MK, Sen PK. Characteristics of iron ore tailing slime in India and its test for required pond size. Environ Monit Assess. 2001;68(1):51–61.10.1023/A:1010782822753
   PubMed Web of Science ®Google Scholar
• Fall M, Benzaazoua M, Ouellet S. Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill. Miner Eng. 2005;18(1):41–44.10.1016/j.mineng.2004.05.012
   Web of Science ®Google Scholar
• Yilmaz E, Belem T, Benzaazoua M, et al. Use of high-density paste backfill for safe disposal of copper/zinc mine tailings. Gospod Surowcami Min. 2011;27(3):81–94.
   Web of Science ®Google Scholar
• Deschamps T, Benzaazoua M, Bussière B, et al. Laboratory study of surface paste disposal for sulfidic tailings: physical model testing. Miner Eng. 2011;24(8):794–806.10.1016/j.mineng.2011.02.013
   Web of Science ®Google Scholar
• Yılmaz T, Ercikdi B. Predicting the uniaxial compressive strength of cemented paste backfill from ultrasonic pulse velocity test. Nondestr Test Eval. 2016;31(3):247–266.10.1080/10589759.2015.1111891
   Web of Science ®Google Scholar
• Kesimal A, Yilmaz E, Ercikdi B, et al. Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill. Mater Lett. 2005;59(28):3703–3709.10.1016/j.matlet.2005.06.042
   Web of Science ®Google Scholar
• Aziez MN, Bezzar A. Effect of temperature and type of sand on the magnesium sulphate attack in sulphate resisting Portland cement mortars. J Adhes Sci Technol. 2017:1–19. doi:10.1080/01694243.2017.1353398.
   Web of Science ®Google Scholar
• ASTM. Standard specification for pozzolanic blended materials in construction applications. West Conshohocken (PA): ASTM International. ASTM D5370-14; 2014.
   Google Scholar
• ASTM. Standard specification for silica fume used in cementitious mixtures. West Conshohocken (PA): ASTM International. ASTM C1240-15; 2015.
   Google Scholar
• ASTM. Standard specification for slag cement for use in concrete and mortars. West Conshohocken, PA: ASTM International. ASTM C989/C989M-14; 2014.
   Google Scholar
• Balo F, Yücel HL, Ucar A. Research of the thermal and strength properties for materials obtained with sunflower oil. J Adhes Sci Technol. 2011;25(14):1629–1645.10.1163/016942411X559003
   Web of Science ®Google Scholar
• Fernandez-Jimenez A, Puertas F. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements. Adv Cem Res. 2003;15(3):129–136.10.1680/adcr.2003.15.3.129
   Web of Science ®Google Scholar
• Joh M, Matsuda T, Miyazono A. Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation. Cem Concr Res. 2014;57(3):95–104.
   Google Scholar
• Wang J, Wang JX, Huang Y, et al. Preparation of alkali-activated slag-fly ash-metakaolin hydroceramics for immobilizing simulated sodium-bearing waste. J Am Ceram Soc. 2015;98(5):1393–1399.10.1111/jace.2015.98.issue-5
   Web of Science ®Google Scholar
• Fernández-Jiménez A, Palomo JG, Puertas F. Alkali-activated slag mortars mechanical strength behavior. Cem Concr Res. 1999;29(8):1313–1321.10.1016/S0008-8846(99)00154-4
   Web of Science ®Google Scholar
• Pan Z, Zhang J, Liu WQ. Solidification/stabilization of zinc-lead tailings by alkali activated slag cement. J Wuhan Univ Technol Mater Sci Ed. 2015;30(1):105–108.10.1007/s11595-015-1109-6
   Web of Science ®Google Scholar
• Burciaga-Díaz O, Escalante-García JI. Structure, mechanisms of reaction, and strength of an alkali-activated blast-furnace slag. J Am Ceram Soc. 2013;96(12):3939–3948.10.1111/jace.12620
   Web of Science ®Google Scholar
• Puertas F, Martı́Nez-Ramı́Rez S, Alonso S, et al. Alkali-activated fly ash/slag cements. Cem Concr Res. 2000;30(10):1625–1632.10.1016/S0008-8846(00)00298-2
   Web of Science ®Google Scholar
• Lu XJ, Hu SG, Jin ZQ. Chemical activation of cementing properties of granulated blast furnace slags. Adv Mater Res. 2012;454(454):11–16.
   Google Scholar
• Ercikdi B, Cihangir F, Kesimal A, et al. Utilization of industrial waste products as pozzolanic material in cemented paste backfill of high sulphide mill tailings. J Hazard Mater. 2009;168(2–3):848–856.10.1016/j.jhazmat.2009.02.100
   PubMed Web of Science ®Google Scholar
• Pokharel M, Fall M. Coupled Thermochemical Effects on the Strength Development of Slag-Paste Backfill Materials. J Mater Civ Eng. 2011;23(5):511–525.10.1061/(ASCE)MT.1943-5533.0000192
   Web of Science ®Google Scholar
• Shi CJ, Fernández-Jiménez A. Stabilization/solidification of hazardous and radioactive wastes with alkali-activated cements. J Hazard Mater. 2006;137(3):1656–1663.10.1016/j.jhazmat.2006.05.008
   PubMed Web of Science ®Google Scholar
• Cihangir F, Ercikdi B, Kesimal A, et al. Paste backfill of high-sulphide mill tailings using alkali-activated blast furnace slag: Effect of activator nature, concentration and slag properties. Miner Eng. 2015;83(11):117–127.10.1016/j.mineng.2015.08.022
   Web of Science ®Google Scholar
• Cihangir F, Ercikdi B, Kesimal A, et al. Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: effect of binder type and dosage. Miner Eng. 2012;30(4):33–43.10.1016/j.mineng.2012.01.009
   Web of Science ®Google Scholar
• Ouellet S, Bussière B, Aubertin M, et al. Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results. Cem Concr Res. 2007;37(12):1654–1665.10.1016/j.cemconres.2007.08.016
   Web of Science ®Google Scholar
• Liu MC, Zhao FQ. Influencing factors of steel slag/blast furnace slag based solidifying agents for total tailings paste backfill. International Conference on Material Engineering and Application; 2016 ;Shanghai, China: Atlantis Press.
   Google Scholar
• Cui SP, Liu LL, Wang YL, et al. Influence of fineness on activity index of blast furnace slag with different SiO2/Al2O3. Mater Sci Forum. 2015;814(3):579–582.10.4028/www.scientific.net/MSF.814
   Google Scholar
• Öner M, Erdoğdu K, Günlü A. Effect of components fineness on strength of blast furnace slag cement. Cem Concr Res. 2003;33(4):463–469.
   Web of Science ®Google Scholar
• Liu H, Li P, Jin QL. Influence of slag fineness on durability of high-performance concrete. Appl Mech Mater. 2012;204–208(1):3240–3243.10.4028/www.scientific.net/AMM.204-208
   Google Scholar
• Lerch W. The influence of gypsum on the hydration and properties of Portland cement pastes. Portland Cem Assoc R & D Lab Bull. 2008;46:1252–1291.
   Google Scholar
• Michel M, Georgin JF, Ambroise J, et al. The influence of gypsum ratio on the mechanical performance of slag cement accelerated by calcium sulfoaluminate cement. Constr Building Mater. 2011;25(3):1298–1304.10.1016/j.conbuildmat.2010.09.015
   Web of Science ®Google Scholar
• Gao Y, Xu J, Bai E, et al. Static and dynamic mechanical properties of high early strength alkali activated slag concrete. Ceram Int. 2015;41(10):12901–12909.10.1016/j.ceramint.2015.06.131
   Web of Science ®Google Scholar
• Sajedi F, Razak HA. The effect of chemical activators on early strength of ordinary Portland cement-slag mortars. Constr Building Mater. 2010;24(10):1944–1951.10.1016/j.conbuildmat.2010.04.006
   Web of Science ®Google Scholar
• Krivenko P, Petropavlovsky O, Petranek V, et al. High strength alkali activated slag cements with controlled setting times and early strength gain. Adv Mater Res. 2015;1100:44–49.10.4028/www.scientific.net/AMR.1100
   Google Scholar
• Zhou X, Hao X, Ma Q, et al. Effects of compound chemical activators on the hydration of low-carbon ferrochrome slag-based composite cement. J Environ Manage. 2017;191(4):58–65.10.1016/j.jenvman.2016.12.048
   PubMed Web of Science ®Google Scholar
• Cui SP, Liu LL, Wang YL, et al. Influence of fineness on activity index of blast furnace slag with different SiO2/Al2O3. Mater Sci Forum. 2015;814:579–582.10.4028/www.scientific.net/MSF.814
   Google Scholar
• Li B, Hang MY, Dong SF. Experimental study of slag powder fineness effect on concrete performance. Appl Mech Mater. 2013;405–408:2631–2634.
   Google Scholar
• Carlo BD, Sauro S, Deb S, et al. Porosity, micro-hardness and morphology of white and gray portland cements in relation to their potential in the development of new dental filling materials. J Adhes Sci Technol. 2012;26(1–3):19–26.
   Web of Science ®Google Scholar
• Bauné E, Bonnet C, Liu S. Reconsidering the basicity of a FCAW consumable - part 1: solidified slag composition of a FCAW consumable as a basicity indicator. Weld Res Suppl- Weld J. 2000;79(3):57.
   Web of Science ®Google Scholar
• Aldridge LP. Accuracy and precision of phase analysis in portland cement by Bogue, microscopic and X-ray diffraction methods. Cem Concr Res. 1982;12(3):381–398.10.1016/0008-8846(82)90087-4
   Web of Science ®Google Scholar
• Oueslati O, Duchesne J. Resistance of blended cement pastes subjected to organic acids: quantification of anhydrous and hydrated phases. Cem Concr Compos. 2014;45(1):89–101.10.1016/j.cemconcomp.2013.09.007
   Web of Science ®Google Scholar
• Luke K, Glasser FP. Selective dissolution of hydrated blast furnace slag cements. Cement & Concrete Research. 1987;17(2):273–282.10.1016/0008-8846(87)90110-4
   Web of Science ®Google Scholar
• Gómez-Zamorano LY, Escalante-García JI. Effect of curing temperature on the nonevaporable water in portland cement blended with geothermal silica waste. Cem Concr Compos. 2010;32(8):603–610.10.1016/j.cemconcomp.2010.07.004
   Web of Science ®Google Scholar
• Kumar S, Kumar R, Bandopadhyay A, et al. Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement. Cem Concr Compos. 2008;30(8):679–685.10.1016/j.cemconcomp.2008.05.005
   Web of Science ®Google Scholar
• Kim MS, Jun Y, Lee C, et al. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag. Cem Concr Res. 2013;54(12):208–214. doi:10.1016/j.cemconres.2013.09.011.
   Web of Science ®Google Scholar
• Dweck J, Silva PFFD, Büchler PM, et al. Study by thermogravimetry of the evolution of ettringite phase during type II Portland cement hydration. J Therm Anal Calorim. 2002;69(1):179–186.10.1023/A:1019950126184
   Web of Science ®Google Scholar
• Petkova V, Stoyanov V, Pelovski Y. TG–DTG–DTA in studying white self-compacting cement mortars. J Therm Anal Calorim. 2012;109(2):797–806.10.1007/s10973-012-2447-7
   Web of Science ®Google Scholar
• Neto AAM, Cincotto MA, Repette W. Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum. Cem Concr Compos. 2010;32(4):312–318.10.1016/j.cemconcomp.2010.01.004
   Web of Science ®Google Scholar
• Pavlík Z, Trník A, Kulovaná T, et al. DSC and TG analysis of a blended binder based on waste ceramic powder and portland cement. Int J Thermophys. 2016;37(3):441.10.1007/s10765-016-2043-3
   Web of Science ®Google Scholar
• Villain G, Thiery M, Platret G. Measurement methods of carbonation profiles in concrete: thermogravimetry, chemical analysis and gammadensimetry. Cem Concr Res. 2007;37(8):1182–1192. doi:10.1016/j.cemconres.2007.04.015.
   Web of Science ®Google Scholar
• Wu P, Lyu XJ, Wang JX, et al. Effect of anhydrite on hydration of clinker activated slag cementing materials. J Chin Univ Min Technol. 2016;45(3):615–622.
   Google Scholar
• Puerta-Falla G, Balonis M, Saout GL, et al. The influence of slightly and highly soluble carbonate salts on phase relations in hydrated calcium aluminate cements. J Mater Sci. 2016;51(12):6062–6074.10.1007/s10853-016-9912-9
   Web of Science ®Google Scholar
• Escalante JI, Gómez LY, Johal KK, et al. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions. Cem Concr Res. 2001;31(10):1403–1409.10.1016/S0008-8846(01)00587-7
   Web of Science ®Google Scholar