Load bearing capacity of minimal invasive direct and indirect veneers bonded to maxillary incisors with severe wear: effect of preparation design and material type

References

• Vailati F, Belser UC. Full-mouth adhesive rehabilitation of a severely eroded dentition: the three-step technique. Part 1. Eur J Esthet Dent. 2008;3:30–44.
   PubMedGoogle Scholar
• Jaeggi T, Lussi A. Prevalence, incidence and distribution of erosion. Monogr Oral Sci. 2006;20:44–65.10.1159/000093350
   PubMedGoogle Scholar
• Van’t Spijker A, Rodriguez JM, Kreulen CM, et al. Prevalence of tooth wear in adults. Int J Prosthodont. 2009;22:35–42.
   PubMed Web of Science ®Google Scholar
• Dahl BL, Carlsson GE, Ekfeldt A. Occlusal wear of teeth and restorative materials. A review of classification, etiology, mechanisms of wear, and some aspects of restorative procedures. Acta Odontol Scand. 1993;51:299–311.
   PubMed Web of Science ®Google Scholar
• Nunn JH. Prevalence of dental erosion and the implications for oral health. Eur J Oral Sci. 1996;104:156–161.10.1111/eos.1996.104.issue-2
   PubMed Web of Science ®Google Scholar
• Milosevic A. Tooth wear: an aetiological and diagnostic problem. Eur J Prosthodont Restor Dent. 1993;1:173–178.
   PubMedGoogle Scholar
• Crothers AJ. Tooth wear and facial morphology. J Dent. 1992;20:333–341.10.1016/0300-5712(92)90019-9
   PubMed Web of Science ®Google Scholar
• Barnfather KD. Restoration of the upper dental arch using Lava all-ceramic crown and bridgework. Br Dent J. 2007;202:731–735.10.1038/BDJ.2007.534
   PubMed Web of Science ®Google Scholar
• Pjetursson BE, Brägger U, Lang NP, et al. Comparison of survival and complication rates of tooth-supported fixed dental prostheses (FDPs) and implant-supported FDPs and single crowns (SCs). Clin Oral Implants Res. 2007;18:97–113.10.1111/clr.2007.18.issue-s3
   PubMed Web of Science ®Google Scholar
• Valenti M. Retrospective survival analysis of 261 lithium disilicate crowns in a private general practice. Quintessence Int. 2009;40:573–579.
   PubMed Web of Science ®Google Scholar
• Edelhoff D, Sorensen JA. Tooth structure removal associated with various preparation designs for anterior teeth. J Prosthet Dent. 2002;87:503–509.10.1067/mpr.2002.124094
   PubMed Web of Science ®Google Scholar
• Valderhaug J. Assessment of the periapical and clinical status of crowned teeth over 25 years. J Dent. 1997;25:97–105.10.1016/S0300-5712(96)00008-5
   PubMed Web of Science ®Google Scholar
• Bader JD, Rozier RG, McFall WT Jr, et al. Effect of crown margins on periodontal conditions in regularly attending patients. J Prosthet Dent. 1991;65:75–79.10.1016/0022-3913(91)90053-Y
   PubMed Web of Science ®Google Scholar
• Walton TR. A 10-year longitudinal study of fixed prosthodontics: clinical characteristics and outcome of single-unit metal-ceramic crowns. Int J Prosthodont. 1999;12:519–526.
   PubMed Web of Science ®Google Scholar
• Kimmes NS, Barkmeier WW, Erickson RL, et al. Adhesive bond strengths to enamel and dentin using recommended and extended treatment times. Oper Dent. 2010;35:112–119.10.2341/09-081-L
   PubMed Web of Science ®Google Scholar
• Gresnigt MM, Ozcan M, Kalk W. Esthetic rehabilitation of worn anterior teeth with thin porcelain laminate veneers. Eur J Esthet Dent. 2011a;6:298–313.
   PubMedGoogle Scholar
• Gresnigt MM, Kalk W, Ozcan M. Randomized clinical trial of indirect resin composite and ceramic veneers: up to 3-year follow-up. J Adhes Dent. 2013;15:181–190.
   PubMed Web of Science ®Google Scholar
• Gulamali AB, Hemmings KW, Tredwin CJ, et al. Survival analysis of composite Dahl restorations provided to manage localised anterior tooth wear (ten year follow-up). Br Dent J. 2011;211:E9.10.1038/sj.bdj.2011.683
   PubMed Web of Science ®Google Scholar
• Redman CD. The survival and clinical performance of resin-based composite restorations used to treat localised anterior tooth wear. Br Dent J. 2003;194:566–572.10.1038/sj.bdj.4810209
   PubMed Web of Science ®Google Scholar
• Gresnigt MM, Kalk W, Özcan M. Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites. J Dent. 2012;40:766–775.10.1016/j.jdent.2012.05.010
   PubMed Web of Science ®Google Scholar
• Morimoto S, Rebello de Sampaio FB, Braga MM, et al. Survival rate of resin and ceramic inlays, onlays, and overlays: a systematic review and meta-analysis. J Dent Res. 2016;95:985–994.10.1177/0022034516652848
   PubMed Web of Science ®Google Scholar
• Smales RJ. Long-term survival of direct and indirect restorations placed for the treatment of advanced tooth wear. Eur J Prosthodont Restor Dent. 2007;15:2–6.
   PubMedGoogle Scholar
• Peumans M, De Munck J, Fieuws S, et al. A prospective ten-year clinical trial of porcelain veneers. J Adhes Dent. 2004;6:65–76.
   PubMed Web of Science ®Google Scholar
• Beier US, Kapferer I, Burtscher D, et al. Clinical performance of porcelain laminate veneers for up to 20 years. Int J Prosthodont. 2012;25:79–85.
   PubMed Web of Science ®Google Scholar
• Dumfahrt H, Schäffer H. Porcelain laminate veneers. A retrospective evaluation after 1 to 10 years of service: Part II – clinical results. Int J Prosthodont. 2000;13:9–18.
   PubMed Web of Science ®Google Scholar
• Land MF, Hopp CD. Survival rates of all-ceramic systems differ by clinical indication and fabrication method. J Evid Based Dent Pract. 2010;10:37–38.10.1016/j.jebdp.2009.11.013
   PubMedGoogle Scholar
• Layton DM, Clarke M, Walton TR. A systematic review and meta-analysis of the survival of feldspathic porcelain veneers over 5 and 10 years. Int J Prosthodont. 2012;25:590–603.
   PubMed Web of Science ®Google Scholar
• Layton DM, Clarke M. A systematic review and meta-analysis of the survival of non-feldspathic porcelain veneers over 5 and 10 years. Int J Prosthodont. 2013;26:111–124.10.11607/ijp.3202
   PubMed Web of Science ®Google Scholar
• BURKE FJ. Survival rates for porcelain laminate veneers with special reference to the effect of preparation in dentin: a literature review. J Esthet Restor Dent. 2012;24:257–265.10.1111/jerd.2012.24.issue-4
   PubMed Web of Science ®Google Scholar
• Petridis HP, Zekeridou A, Malliari M, et al. Survival of ceramic veneers made of different materials after a minimum follow-up period of five years: a systematic review and meta-analysis. Eur J Esthet Dent. 2012;7:138–152.
   PubMedGoogle Scholar
• Rappelli G. Restoration of anterior teeth with indirect composite partial coverage crowns: a clinical report. J Prosthet Dent. 2004;92:519–522.10.1016/j.prosdent.2004.08.004
   PubMed Web of Science ®Google Scholar
• Human Research Ordinance (810.301), Art. 30.
   Google Scholar
• Human Research Act (810.30), Art. 2 and 32, Human Research Ordinance (810.301), Art. 25.
   Google Scholar
• World Medical Association (WMA): Declaration of Helsinki – Ethical Principles for Medical Research Involving Human Subjects. 64th WMA General Assembly, Fortaleza, October 2013.
   Google Scholar
• Gresnigt MM, Özcan M. Fracture strength of direct versus indirect laminates with and without fiber application at the cementation interface. Dent Mater. 2007;23:927–933.10.1016/j.dental.2006.06.037
   PubMed Web of Science ®Google Scholar
• Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003;19:725–731.
   PubMed Web of Science ®Google Scholar
• Peumans M, Van Meerbeek B, Lambrechts P, et al. Porcelain veneers: a review of the literature. J Dent. 2000;28:163–177.10.1016/S0300-5712(99)00066-4
   PubMed Web of Science ®Google Scholar
• Özcan M, Alander P, Vallittu PK, et al. Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites. J Mater Sci Mater Med. 2005;16:21–27.
   PubMed Web of Science ®Google Scholar
• Rinastiti M, Özcan M, Siswomihardjo W, et al. Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig. 2011;15:625–633.10.1007/s00784-010-0426-6
   PubMed Web of Science ®Google Scholar
• Kato H, Matsumura H, Ide T, et al. Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditioner. J Oral Rehabil. 2001;28:102–108.10.1046/j.1365-2842.2001.00627.x
   PubMed Web of Science ®Google Scholar
• Stewart GP, Jain P, Hodges J. Shear bond strength of resin cements to both ceramic and dentin. J Prosthet Dent. 2002;88:277–284.10.1067/mpr.2002.128034
   PubMed Web of Science ®Google Scholar
• Belli R, Petschelt A, Lohbauer U. Are linear elastic material properties relevant predictors of the cyclic fatigue resistance of dental resin composites? Dent Mater. 2014;13:S0109–5641.
   Google Scholar
• Fischer H, Dautzenberg G, Marx R. Nondestructive estimation of the strength of dental ceramic materials. Dent Mater. 2001;17:289–295.10.1016/S0109-5641(00)00086-5
   PubMed Web of Science ®Google Scholar
• Yoshida K, Morimoto N, Tsuo Y, et al. Flexural fatigue behavior of machinable and light-activated hybrid composites for esthetic restorations. J Biomed Mater Res B Appl Biomater. 2004;70B:218–222.10.1002/(ISSN)1097-4636
   Web of Science ®Google Scholar
• Souza RO, Özcan M, Michida SM, et al. Conversion degree of indirect resin composites and effect of thermocycling on their physical properties. J Prosthodont. 2010;19:218–225.10.1111/jopr.2010.19.issue-3
   PubMedGoogle Scholar
• Cesar PF, Miranda WG Jr, Braga RR. Influence of shade and storage time on the flexural strength, flexural modulus, and hardness of composites used for indirect restorations. J Prosthet Dent. 2001;86:289–296.10.1067/mpr.2001.114513
   PubMed Web of Science ®Google Scholar
• Yamanel K, Caglar A, Gülsahi K, et al. Effect of different ceramic and composite materials on stress distribution in inlay and onlay cavities; 3D finite element analysis. Dent Mater J. 2009;28:661–670.10.4012/dmj.28.661
   PubMed Web of Science ®Google Scholar
• Magne P, Versluis A, Douglas WH. Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers. J Prosthet Dent. 1999;81:335–344.10.1016/S0022-3913(99)70278-7
   PubMed Web of Science ®Google Scholar
• Heintze SD, Cavalleri A, Forjanic M, et al. Wear of ceramic and antagonist – a systematic evaluation of influencing factors in vitro. Dent Mater. 2008;24:433–449.10.1016/j.dental.2007.06.016
   PubMed Web of Science ®Google Scholar
• Kukiattrakoon B, Hengtrakool C, Kedjarune-Leggat U. Effect of acidic agents on surface roughness of dental ceramics. Dent Res J. 2011;8:6–15.
   PubMedGoogle Scholar
• Ku CW, Park SW, Yang HS. Comparison of the fracture strengths of metal-ceramic crowns and three ceromer crowns. J Prosthet Dent. 2002;88:70–175.
   Web of Science ®Google Scholar
• Kellerhoff RK, Fischer J. In vitro fracture strength and thermal shock resistance of metal-ceramic crowns with cast and machined AuTi frameworks. J Prosthet Dent. 2007;97:209–215.10.1016/j.prosdent.2007.02.007
   PubMed Web of Science ®Google Scholar
• Suleiman SH, Vult von Steyern P. Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium. Acta Odontol Scand. 2013;71:1280–1289.10.3109/00016357.2012.757650
   PubMed Web of Science ®Google Scholar
• Chun YH, Raffelt C, Pfeiffer H, et al. Restoring strength of incisors with veneers and full ceramic crowns. J Adhes Dent. 2010;12:45–54.
   PubMed Web of Science ®Google Scholar
• D’Arcangelo C, De Angelis F, Vadini M, et al. In vitro fracture resistance and deflection of pulpless teeth restored with fiber posts and prepared for veneers. J Endod. 2008;34:838–841.10.1016/j.joen.2008.03.026
   PubMed Web of Science ®Google Scholar
• Schmitter M, Huy C, Ohlmann B, et al. Fracture resistance of upper and lower incisors restored with glass fiber reinforced posts. J Endod. 2006;32:328–330.10.1016/j.joen.2005.09.015
   PubMed Web of Science ®Google Scholar
• Zhi-Yue L, Yu-Xing Z. Effects of post-core design and ferrule on fracture resistance of endodontically treated maxillary central incisors. J Prosthet Dent. 2003;89:368–373.10.1067/mpr.2003.73
   PubMed Web of Science ®Google Scholar
• Gresnigt MM, Ozcan M, Kalk W, et al. Effect of static and cyclic loading on ceramic laminate veneers adhered to teeth with and without aged composite restorations. J Adhes Dent. 2011b;13:569–577.
   PubMed Web of Science ®Google Scholar
• Helkimo E, Carlsson GE, Helkimo M. Bite force and state of dentition. Acta Odontol Scand. 1977;35:297–303.10.3109/00016357709064128
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Kolbeck C, Ries S, et al. Zirconia resin-bonded fixed partial dentures in the anterior maxila. Quintessence Int. 2008;39:313–319.
   PubMed Web of Science ®Google Scholar
• Loomans B, Özcan M. Intra-oral repair of direct and indirect restorations: procedures and guidelines. Oper Dent. (Epub); 2016.
   Web of Science ®Google Scholar
• Kinney JH, Balooch M, Haupt DL Jr, et al. Mineral distribution and dimensional changes in human dentin during demineralization. J Dent Res. 1995;74:1179–1184.10.1177/00220345950740050601
   PubMed Web of Science ®Google Scholar