References
- Barnes TA, Pashby IR. Joining techniques for aluminium spaceframes used in automobiles: Part I-solid and liquid phase welding. J Mater Process Tech. 2000;99(1-3):62–71.
- Da Silva LFM, Öchsner A, Adams RD, et al. Handbook of adhesion technology. New York (NY): Springer; 2011.
- He XC, Wang YQ, Cun HY, et al. Stress distribution properties in adhesively bonded beams. AMM. 2014;556:720–724.
- Adams RD. Adhesive bonding: science, technology and applications. New York (NY): Elsevier; 2005.
- Lunder O, Lapique F, Johnsen B, et al. Effect of pre-treatment on the durability of epoxy-bonded AA6060 aluminium joints. Int J Adhes Adhes. 2004;24(2):107–117.
- Hua DD, Lin JP, Zhang BW. Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints. J Adhes Sci Technol. 2013;27(14):1580–1589.
- Baldan A. Adhesively-bonded joints in metallic alloys, polymers and composite materials: mechanical and environmental durability performance. J Mater Sci. 2004;39(15):4729–4797.
- Zheng R, Lin JP, Wang PC, et al. Effect of hot-humid exposure on static strength of adhesive-bonded aluminum alloys. Defen Technol. 2015;11(3):220–228.
- Goglio L, Rezaei M. Effect of different substrate Pre-treatments on the resistance of aluminum joints to moist environments. J Adhesion. 2013;89(10):769–784.
- Laplante G, Ouriadov AV, Lee SP, et al. Anomalous moisture diffusion in an epoxy adhesive detected by magnetic resonance imaging. J Appl Ploym Sci. 2008;109(2):1350–1359.
- Underhill PR, DuQuesnay DL. The role of corrosion/oxidation in the failure of aluminum adhesive joints under hot, wet conditions. Int J Adhes Adhes. 2006;26(1-2):88–93.
- Rechner R, Jansen I, Beyer E. Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification. Int J Adhes Adhes. 2010;30(7):595–601.
- Zheng R, Lin JP, Wang PC, et al. Effects of a sheet metal stamping lubricant on static strength of adhesive-bonded aluminum alloys. J Adhes Sci Technol. 2015;29(13):1382–1402.
- Wu YR, Lin JP, Wang PC, et al. Effect of long-term neutral salt spray exposure on durability of adhesive-bonded Zr–Ti coated aluminum joint. Int J Adhes Adhes. 2016;64:97–108.
- Zhang Y, Lin JP, Zheng R, et al. Investigation of strength degradation of adhesive-bonded aluminum joints exposed to corrosive environment using electrochemical methods. J Adhes Sci Technol. 2018;32(6):642–655.
- Teixeira de Freitas S, Banea MD, Budhe S, et al. Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests. Compos Struct. 2017;164:68–75.
- Fiore V, Calabrese L, Proverbio E, et al. Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment. J Adhes Sci Technol. 2016;30(19):2157–2174.
- Spaggiari A, Dragoni E. Effect of mechanical surface treatment on the static strength of adhesive lap joints. J Adhesion. 2013;89(9):677–696.
- Saleema N, Sarkar DK, Paynter RW, et al. A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications. Appl Surf Sci. 2012;261:742–748.
- Wu YR, Lin JP, Carlson BE, et al. Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys. Surf Coat Tech. 2016;304: 340–347.
- ASTM B117. Standard Practice for Operating Salt Spray (Fog) Apparatus. American Society for Testing Materials. West Conshohocken (PA): American Society for Testing Materials; 1997.
- ASTM D1002-2001. Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (metal-to-metal). West Conshohocken (PA): American Society for Testing Materials; 2001.
- Xu YW, Li HG, Shen YZ, et al. Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing technique. Int J Adhes Adhes. 2016;70:74–80.
- Wang B, Hu X, Lu P, et al. Improvement of adhesive bonding of grit-blasted steel substrates by using diluted resin as a primer. Int J Adhes Adhes. 2017;73:92–99.
- Crocombe AD. Global yielding as a failure criterion for bonded joints. Int J Adhes Adhes. 1989;9(3):145–153.
- Zheng R, Lin JP, Wang PC, et al. Effect of adhesive characteristics on static strength of adhesive-bonded aluminum alloys. Int J Adhes Adhes. 2015;57:85–94.
- Homborg AM, Van, EP, Tinga T, et al. Novel time–frequency characterization of electrochemical noise data in corrosion studies using Hilbert spectra. Corros Sci. 2013;66:97–110.
- Caines S, Khan F, Zhang Y, et al. Simplified electrochemical potential noise method to predict corrosion and corrosion rate. Simplified electrochemical potential noise method to predict corrosion and corrosion rate. J Loss Prevent Proc. 2017;47:72–84.
- Liu ZX, Sun RN, Mao ZP, et al. Effects of phosphate pretreatment and hot-humid environmental exposure on static strength of adhesive-bonded magnesium AZ31 sheets. Surf Coat Tech. 2012;206(16):3517–3525.
- Dong CF, Sheng H, An YH, et al. Corrosion of 7A04 aluminum alloy under defected epoxy coating studied by localized electrochemical impedance spectroscopy. Prog Org Coat. 2010;67(3):269–273.
- Desiraju GR. Chemistry beyond the molecule. Nature. 2001;412(6845):397.
- Bowditch MR. The durability of adhesive joints in the presence of water. Int J Adhes Adhes. 1996;16(2):73–79.
- Zhou J, Lucas JP. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy. Polymer. 1999;40(20):5505–5512.
- Cantrell, JH. Determination of absolute bond strength from hydroxyl groups at oxidized aluminum-epoxy interfaces by angle beam ultrasonic spectroscopy. J Appl Phys. 2004;96(7):3775–3781.
- ASTM D3528-96. Standard test method for strength properties of double lap shear adhesive joints by tension loading. West Conshohocken (PA): American Society for Testing Materials; 2008.
- Adams RD, Mallick V. A method for the stress analysis of lap joints. J Adhesion. 1992;38(3-4):199–217.
- Adams RD, Comyn J, Wake WC. Structural adhesive joints in engineering. London: Springer; 1997.