Experimental and numerical investigation on the strength of polymer-metal hybrid with laser assisted metal surface treatment

References

• Yeh RY, Hsu RQ. Application of porous oxide layer in plastic/metal direct adhesion by injection molding. J Adhes Sci Technol. 2015;29:1617–1627.
   Web of Science ®Google Scholar
• Ma F, Chen S, Zhao H, et al. Lightweight on frame of FSC with constriants of strength, stiffness and modal. J Hunan Univ (Natural Sci). 2018;45:18–25.
   Google Scholar
• Miklavec M, Klemenc J, Kostanjevec A, et al. Properties of a metal-nonmetal hybrid joint with an improved shape of the metal insert. Exp Techniques. 2015;39:69–76.
   Web of Science ®Google Scholar
• Grujicic M. Injection over molding of polymer-metal hybrid structures. Am J Sci Technol. 2014;1:168–181.
   Google Scholar
• Chen T, Zeng J, Duan L, et al. A study on the factors affecting the connection efficiency of single lap structural adhesive join. Automot Eng. 2016;38:1030–1036.
   Google Scholar
• Grujicic M, Sellappan V, Arakere G, et al. Computational feasibility analysis of direct- adhesion polymer-to-metal hybrid technology for load-bearing body-in-white structural components. J Mater Process Technol. 2008;195:282–298.
   Web of Science ®Google Scholar
• Grujicic M, Pandurangan B, Bell WC, et al. A computational analysis and suitability assessment of cold-gas dynamic spraying of glass-fiber-reinforced poly-amide 6 for use in direct-adhesion polymer metal hybrid components. Appl Surf Sci. 2008;254:2136–2145.
   Web of Science ®Google Scholar
• Grujicic M, Sellappan V, Kotrika S, et al. Suitability analysis of a polymer–metal hybrid technology based on high-strength steels and direct polymer-to-metal adhesion for use in load-bearing automotive body-in-white applications. J Mater Process Technol. 2009;209:1877–1890.
   Web of Science ®Google Scholar
• Takeda T, Yasuoka T, Hoshi H, et al. Strength and bonding characteristics of adhesive joints with surface-treated titanium-alloy substrates. J Adhes Sci Technol. 2017;32:1–19.
   Web of Science ®Google Scholar
• Kleffel T, Drummer D. Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion. Compos B Eng. 2017;117:20–25.
   Web of Science ®Google Scholar
• Li X, Liu F, Gong N, et al. Enhancing the joining strength of injection-molded polymer-metal hybrids by rapid heating and cooling. J Mater Process Technol. 2017;249:386–393.
   Web of Science ®Google Scholar
• Shen L, Sun L, Li L, et al. The effect of interfacial microstructures on joining strength of polymer-metal hybrid interface. ASME 2016 International Mechanical Engineering Congress and Exposition. 2016;1–8.
   Google Scholar
• Huang B, Sun L, Li L, et al. Experimental investigation of the strength of polymer-steel direct adhesion (PSDA) joints with micro-structures ablated by laser. J Mater Process Technol. 2017;249:407–414.
   Web of Science ®Google Scholar
• Lucchetta G, Marinello F, Bariani PF. Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP Ann Manuf Technol. 2011;60:559–562.
   Web of Science ®Google Scholar
• Zhang Z, Shan J, Tan X. Evaluation of the CFRP grafting and its influence on the laser joining CFRP to aluminum alloy. J Adhes Sci Technol. 2017;32:1–17.
   Web of Science ®Google Scholar
• Kießling R, Ihlemann J, Pohl M, et al. On the design, characterization and simulation of hybrid metal-composite interfaces. Appl Compos Mater. 2017;24:1–19.
   Web of Science ®Google Scholar
• Engelmann C, Eckstaedt J, Olowinsky A, et al. Experimental and simulative investigations of laser assisted plastic-metal-joints considering different load directions. Phys Procedia. 2016;83:1118–1129.
   Google Scholar
• Lambiase F, Genna S, Kant R, et al. A procedure for calibration and validation of FE modelling of laser-assisted metal to polymer direct joining. Opt Laser Technol. 2018;98:363–372.
   Web of Science ®Google Scholar
• Rodríguez-Vidal E, Lambarri J, Soriano C, et al. A combined experimental and numerical approach to the laser joining of hybrid polymer-metal parts. Phys Procedia. 2014;56:835–844.
   Google Scholar
• Li X, Liu F, Gong N, et al. Surface topography induced high injection joining strength of polymer-metal composite and fracture mechanism. Compos Structures. 2018;184:545–553.
   Web of Science ®Google Scholar
• Hu P, Han X, da Silva LFM, et al. Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model. Int J Adhes Adhes. 2013;41:6–15.
   Web of Science ®Google Scholar
• Tan X, Shan J, Tang L, et al. Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint. Chin J Lasers. 2015;42:46–52.
   Google Scholar