Effects of random chopped short carbon fibers on microstructure and mechanical properties of joints for C_f/SiC composites by reaction bonding process

References

• Yang B, Zhou XG, Yu JS. The properties of Cf/SiC composites prepared from different precursors. Ceram Int. 2015;41:4207–4213.
   Google Scholar
• Jian K, Chen Z-H, Ma Q-S, et al. Effects of pyrolysis processes on the microstructures and mechanical properties of Cf/SiC composites using polycarbosilane. Mater Sci Eng A. 2005;390:154–158.
   Web of Science ®Google Scholar
• Schmidt S, Beyer S, Knabe H, et al. Advanced ceramic matrix composite materials for current and future propulsion system applications. Acta Astronaut. 2004;55:409–420.
   Web of Science ®Google Scholar
• Ishikawa T, Kajii S, Matsunaga K, et al. A tough thermally conductive silicon carbide composite with high strength up to 1600 °C in the air. Science. 1998;282:1295–1297.
   PubMed Web of Science ®Google Scholar
• Fitriani P, Sharma AS, Septiadi A, et al. Fabrication of tubular SiCf/SiC using different preform architectures by electrophoretic deposition and hot pressing. Ceram Int. 2017;43:7618–7626.
   Web of Science ®Google Scholar
• Sharma AS, Fitriani P, Yoon DH. Fabrication of SiCf/SiC and integrated assemblies for nuclear reactor applications. Ceram Int. 2017;43:17211–17215.
   Web of Science ®Google Scholar
• Böhrk H, Beyermann U. Secure tightening of a CMC fastener for the heat shield of re-entry vehicles. Comp Struct. 2010;92:107–112.
   Google Scholar
• Zhang Q, Sun L, Liu Q, et al. Effect of brazing parameters on microstructure and mechanical properties of Cf/SiC and Nb-1Zr joints brazed with Ti-Co-Nb filler alloy. J Eur Ceram Soc. 2017;37:931–937.
   Web of Science ®Google Scholar
• Xiong H-P, Chen B, Pan Y, et al. Joining of Cf/SiC composite with a Cu-Au-Pd-V brazing filler and interfacial reactions. J Eur Ceram Soc. 2014;34:1481–1486.
   Web of Science ®Google Scholar
• Tatarko P, Tatarko P, Chlup Z, Mahajan A, et al. High temperature properties of the monolithic CVD beta-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. J Eur Ceram Soc. 2017;37:1205–1216.
   Web of Science ®Google Scholar
• Zhou XB, Liu Z, Li YF, et al. SiC ceramics joined with an in-situ reaction gradient layer of TiC/Ti3SiC2 and interface stress distribution simulations. Ceram Int.. 2018;44:15785–15794.
   Web of Science ®Google Scholar
• Khalifa HE, Koyanagi T, Jacobsen GM, et al. Radiation stable, hybrid, chemical vapor infiltration/preceramic polymer joining of silicon carbide components. J Nucl Mater. 2017;487:91–95.
   Web of Science ®Google Scholar
• Jeong DH, Septiadi A, Fitriani P, et al. Joining of SiCf/SiC using polycarbosilane and polysilazane preceramic mixtures. Ceram Int. 2018;44:10443–10450.
   Web of Science ®Google Scholar
• Singh M, Lara-Curzio E. Design, fabrication, and testing of ceramic joints for high temperature SiC/SiC composites. J Eng Gas Turbines Power. 2001;123:288–292.
   Web of Science ®Google Scholar
• Lewinsohn CA, Singh M, Shibayama T, et al. Joining of silicon carbide composites for fusion energy applications. J Nucl Mater. 2000;283:1258–1261.
   Web of Science ®Google Scholar
• Luo ZH, Jiang DL, Zhang JX, et al. Development of SiC-SiC joint by reaction bonding method using SiC/C tapes as the interlayer. J Eur Ceram Soc. 2012;32:3819–3824.
   Web of Science ®Google Scholar
• Singh M. Microstructure and mechanical properties of reaction-formed joints in reaction-bonded silicon carbide ceramics. J Mater Sci. 1998;33:5781–5787.
   Google Scholar
• Tian WB, Kita H, Hyuga H, et al. Joining of SiC with Si infiltrated tape-cast TiB2-C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties. Mater Sci Eng A. 2011;530:580–584.
   Web of Science ®Google Scholar
• Li S, Zhang YM, Han JC, et al. Effect of carbon particle and carbon fiber on the microstructure and mechanical properties of short fiber reinforced reaction bonded silicon carbide composite. J Eur Ceram Soc. 2013;33:887–896.
   Web of Science ®Google Scholar
• Kumar S, Kumar A, Shukla A, et al. Capillary infiltration studies of liquids into 3D-stitched C-C preforms: part A: internal pore characterization by solvent infiltration, mercury porosimetry, and permeability studies. J Eur Ceram Soc. 2009;29:2643–2650.
   Web of Science ®Google Scholar
• Wu X, Zhu Y, Pei B, et al. Effect of FeCl2 on the pore structure of porous carbon obtained from phenol formaldehyde resin and ethylene glycol. Mater Lett. 2018;215:50–52.
   Web of Science ®Google Scholar
• Song S, Bao C, Wang B. Effect of the addition of carbon fibers on the microstructure and mechanical properties of reaction bonded B4C/SiC composites. J Eur Ceram Soc. 2016;36:1905–1913.
   Web of Science ®Google Scholar
• Suyama S, Kameda T, Itoh Y. Development of high-strength reaction-sintered silicon carbide. Diamond Relat Mater. 2003;12:1201–1205.
   Web of Science ®Google Scholar