References
- Thomas WM, Nicholas ED, Needham JC, et al. GB Patent Application No.9125978.8, 1991.
- Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R. 2005;50:1–78.
- Motalleb-Nejad P, Saeid T, Heidarzadeh A, et al. Effect of tool pin profile on microstructure and mechanical properties of friction stir welded AZ31B magnesium alloy. Mater Des. 2014;59:221–226.
- Heidarzadeh A. Tensile behavior, microstructure, and substructure of the friction stir welded 70/30 brass joints: RSM, EBSD, and TEM study. Arch Civ Mech Eng. 2019;19:137–146.
- Ji S, Li Z, Wang Y, et al. Joint formation and mechanical properties of back heating assisted friction stir welded Ti–6Al–4V alloy. Mater Des. 2017;113:37–46.
- Guo R, Shen Y, Huang G, et al. Microstructures and mechanical properties of thin 304 stainless steel sheets by friction stir welding. J Adhes Sci Technol. 2018;32:1313–1323.
- Yazdipour A, Heidarzadeh A. Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints. J Alloy Compd. 2016;680:595–603.
- Heidarzadeh A, Laleh HM, Gerami H, et al. The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint. Mater Sci Eng A. 2018;735:336–342.
- Choi JW, Liu H, Fujii H. Dissimilar friction stir welding of pure Ti and pure Al. Mater Sci Eng A. 2018;730:168–176.
- Nandan R, DebRoy T, Bhadeshia H. Recent advances in friction-stir welding-process, weldment structure and properties. Prog Mater Sci. 2008;53:980–1023.
- Zhang H, Wang M, Zhang X, et al. Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum alloy. Mater Des. 2015;65:559–566.
- Yang C, Ni DR, Xue P, et al. A comparative research on bobbin tool and conventional friction stir welding of Al-Mg-Si alloy plates. Mater Charact. 2018;145:20–28.
- Hejazi I, Mirsalehi SE. Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy. T Nonferr Metal Soc. 2016;26:676–683.
- Xu W, Wang H, Luo Y, et al. Mechanical behavior of 7085-T7452 aluminum alloy thick plate joint produced by double-sided friction stir welding: Effect of welding parameters and strain rates. J Manuf Process. 2018;35:261–270.
- Santos TG, Miranda RM, Vilaca P. Friction Stir Welding assisted by electrical Joule effect. J Mater Process Technol. 2014;214:2127–2133.
- Guo C, Shen Y, Hou W, et al. Effect of groove depth and plunge depth on microstructure and mechanical properties of friction stir butt welded AA6061-T6. J Adhes Sci Technol. 2018;32:2709–2726.
- Sato YS, Yamashita F, Sugiura Y, et al. FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloy. Scr Mater. 2004;50:365–369.
- Yadav D, Bauri R. Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite. Mater Sci Eng A. 2011;528:1326–1333.
- Heidarzadeh A, Saeid T, Klemm V, et al. Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys. Mater Des. 2019;162:185–197.