References
- Fu BL, Qin GL, Li F, et al. FSW process of dissimilar metals of 6061-T6 Al alloy to AZ31B Mg alloy. J Mater Process Technol. 2015;218:38–47.
- Liu L, Ren D, Liu F. A review of dissimilar welding techniques for magnesium alloys to aluminum alloys. Materials (Basel). 2014;7:3735–3757.
- Coelho RS, Kostka A, Santos JF, et al. Friction-stir dissimilar welding of Al alloy to high strength steels: mechanical properties and their relation to microstructure. Mater Sci Eng A. 2012;556:175–183.
- Fujii H, Sun Y. Recent patented hybrid techniques for FSW of metallic materials. MENG. 2011;3:206–210.
- McLean AA, Powell GLF, Brown IH, et al. FSW of Mg alloy AZ31B to Al alloy 5083. Sci Technol Weld Joining. 2003;8:462–464.
- Yan JC, Xu ZW, Li ZY, et al. Microstructure characteristics and performance of dissimilar welds between Mg alloy and Al formed by friction stirring. Scr Mater. 2005;53:585–589.
- Kwon YJ, Shigematsu I, Saito N. Dissimilar FSW between Mg and Al alloys. Mater Lett. 2008;62:3827–3829.
- Verma J, Taiwade RV, Sapate SG, et al. Evaluation of microstructure, mechanical properties and corrosion resistance of friction stir-welded Al and Mg dissimilar alloys. J Materi Eng Perform. 2017;26:4738–4747.
- Firouzdor V, Kou S. Formation of liquid and IMCs in Al-to-Mg FSW. Metall Mat Trans A. 2010;41:3238–3251.
- Firouzdor V, Kou S. Al-to-Mg FSW: effect of material position, travel speed, and rotation speed. Metall Mat Trans A. 2010;41:2914–2935.
- Azizieh M, Alavijeh AS, Abbasi M, et al. Mechanical properties and microstructural evaluation of AA1100 to AZ31 dissimilar friction stir welds. Mater Chem Phys. 2016;170:251–260.
- Liu ZL, Ji SD, Meng XC. Improving joint formation and tensile properties of dissimilar FSW of Al and Mg alloys by solving the pin adhesion problem. J Materi Eng Perform. 2018;27:1404–1413.
- ASTM E837-13a. Standard test method for determining residual stresses by the hole-drilling strain-gage method. American Society fot Testing Materials (ASTM), Philadelphia (PA); 2013.
- ASTM E8/E8M-16a. Standard practice for preparation tension testing of metallic materials.American Society for Testing Materials (ASTM), Philadelphia (PA); 2016.
- Kalemba-Rec I, Kopyściański M, Miara D, et al. Effect of process parameters on mechanical properties of friction stir welded dissimilar 7075-T651 and 5083-H111 Al alloys. Int J Adv Manuf Technol. 2018;97:2767–2779.
- Sato Y, Park SH, Michiuchi M, et al. Constitutional liquation during dissimilar FSW of Al and Mg alloys. Scr Mater. 2004;50:1233–1236.
- Chang WS, Rajesh SR, Chun CK, et al. Microstructure and mechanical properties of hybrid laser-FSW between AA6061-T6 Al alloy and AZ31 Mg alloy. J Mater Sci Technol. 2011;27:199–204.
- Kostka A, Coelho RS, Santos JD, et al. Microstructure of FSW of Al alloy to Mg alloy. Scr Mater. 2009;60:953–956.
- Sundaram NS, Murugan N. Tensile behavior of dissimilar friction stir welded joints of Al alloys. Mater Des. 2010;31:4184–4193.
- Woo W, Choo H, Prime MB, et al. Microstructure, texture and residual stress in a friction-stir-processed AZ31B Mg alloy. Acta Mater. 2008;56:1701–1711.
- James MN, Hughes DJ, Hattingh DG, et al. Synchrotron diffraction measurement of residual stresses in friction stir welded 5383‐H321 Al butt joints and their modification by fatigue cycling. Fatigue Fract Eng Mater Struct. 2004;27:187–202.
- Woo W, Feng Z, Wang XL, et al. Neutron diffraction measurements of time-dependent residual stresses generated by severe thermomechanical deformation. Scr Mater. 2009;61:624–627.
- Aval HJ. Microstructure and residual stress distributions in FSW of dissimilar aluminium alloys. Mater Des. 2015;87:405–413.