http://orcid.org/0000-0002-9749-7185
References
- Hill C. Wood modification: chemical, thermal and other processes. Chichester: John Wiley and Sons Ltd; 2006.
- Navi P, Sandberg D. Thermo-hydro-mechanical processing of wood engineering sciences. Lausanne: EPFL Press; 2012.
- Esteves BM, Pereira HM. Wood modification by heat treatment: a review. BioResources. 2009;4:370–404.
- Krystofiak T, Lis B, Muszyńska M, et al. Gluability of thermally modified ash wood with EPI adhesives. Characterization of Modified Wood in Relation to Wood Bonding and Coating Performance, At Zreče, Rogla, Slovenia; 2013.
- Sándor P, Sheldon QS, Duygu K, et al. Effect of thermal treatment of wood lumbers on their adhesive bond strength and durability. J Adh Sci Technol. 2007;21:745–754.
- Rautkari L, Honkanen J, Hill CAS, et al. Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180 °C. Eur J Wood Prod. 2014;72:33–41.
- Amirou S, Pizzi A, Luo H. Variation of shear properties of welded spruce at different pressures and welding times. Biotribology. 2016;5:61–66.
- Amirou S, Pizzi A, Delmotte L. Citric acid as waterproofing additive in butt joints linear wood welding. Eur J Wood Prod. 2017;75:651–654.
- Amirou S, Pizzi A, Belleville B, et al. Water resistance of natural joint of spruce produced by linear friction welding without any treatment. Int Wood Wood Prod J. 2017;8:201–207.
- Belleville B, Amirou S, Pizzi A, et al. Optimization of wood welding parameters for Australian hardwood species. BioResources. 2016;12:1007–1014.
- Martins SA, Ganier T, Pizzi A, et al. Parameter scanning for linear welding of Brazilian Eucalyptus benthamii wood. Eur J Wood Prod. 2013;71:525–527.
- Zhang H, Pizzi A, Lu X, et al. Palmyra palm bonding by vibrational welding. Eur J Wood Prod. 2014;72:693–695.
- NF B51–032, Compression Shear Test, 1981.
- NF EN 14080, Timber structures - Glued laminated timber and glued solid timber - requirements, 2013.
- Ruponen J, Čermák P, Rhême M, et al. Reducing the moisture sensitivity of linear friction welded birch (Betula pendula L.) wood through thermal modification. J Adhes Sci Technol. 2015;29:2461–2474.
- Forsman S. Heat treated wood [M.Sc. thesis]. Luleå, Sweden: Luleå University of Technology; 2008. p. 107.
- Tjeerdsma BF, Boonstra M, Pizzi A, et al. Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz als Roh-und Werkstoff. 1998;56:149.
- Meyer B, Boehme C. Formaldehyde emission from solid wood. For Prod J. 1997;47:45–48.
- Delmotte L, Ganne-Chedeville C, Leban JM, et al. CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding. Polymer Degrad Stab. 2008;93:406–412.
- Omrani P, Masson E, Pizzi A, et al. Emission of gases and degradation volatiles from polymeric wood constituents in friction welding of wood dowels. Polymer Degrad Stab. 2008;93:794–799.