References
- Oechsner A. Handbook of adhesion technology. New York (NY): Springer Reference; 2011. p. 1–7.
- Higgins A. Adhesive bonding of aircraft structures. Int J Adhes Adhes. 2000;20(5):367–376.
- Dilger K. Automobiles. In: Adams RD, editor. Adhesive bonding: science, technology and applications. Cambridge (UK): Woodhead Publishing Ltd.; 2005. p. 357–385.
- Liu LM, Xie L. Adhesive bonding between Mg alloys and polypropylene. Mater Technol. 2007;22(2):76–80.
- Martín-Martínez JM, Fernández-Garcia JC, Orgilés-Barceló AC. Adhesion properties and stability of polyurethane adhesive to synthetic rubber joints. Int J Adhes Adhes. 1991;11(3):192–196.
- Khalili SMR, Tavakolian M, Sarabi A. Mechanical properties of nanoclay reinforced epoxy adhesive bonded joints made with composite materials. J Adhes Sci Technol. 2010;24(11–12):1917–1928.
- Liu X, Shao X, Li Q. Experimental study on residual properties of carbon fibre reinforced plastic (CFRP) and aluminum single-lap adhesive joints at different strain rates after transverse pre-impact. Compos Part A: Appl Sci Manufacturing. 2019;124:105372.
- Bocciarelli M, Colombi P. Elasto-plastic debonding strength of tensile steel/CFRP joints. Eng Fract Mech. 2012;85:59–72.
- Qin G, Na J, Tan W, et al. Failure prediction of adhesively bonded CFRP-aluminum alloy joints using cohesive zone model with consideration of temperature effect. J Adhes. 2019;95(8):723–746.
- Pires I, Quintino L, Miranda RM, et al. Performance of 2024-T3 aluminium adhesive bonded joints. Mater Manufacturing Proc. 2005;20(2):175–185.
- de Moura M, Silva MAL, de Morais AB, et al. Equivalent crack based mode II fracture characterization of wood. Eng Fract Mech. 2006;73(8):978–993.
- de Moura M, Oliveira JMQ, Morais JJL, et al. Mixed-mode I/II wood fracture characterization using the mixed-mode bending test. Eng Fract Mech. 2010;77(1):144–152.
- Gheibi MR, Shojaeefard MH, Saeidi Googarchin H. Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints. J Adhes. 2018;6:1–28.
- Barenblatt GI. The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks. J Appl Math Mech. 1959;23(3):622–636.
- Dugdale DS. Yielding of steel sheets containing slits. J Mech Phys Solids. 1960;8(2):100–104.
- Chang F, Chang K. Post-failure analysis of bolted composite joints in tension or shear-out mode failure. J Compos Mater. 1987;21(9):809–833.
- Gao L, Ni F, Braham A, et al. Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration. Constr Build Mater. 2014;55:415–422.
- Li Q, Gui CF, Bo W. Study of adhesive curing pressure in process of ferrite phase shifter. Adv Mater Res. 2013;842:271–274.
- Gu H, Fu G. Failure analysis of the adhesive joint of microwave ferrite phase shifter. Eng Fail Anal. 2013;33:367–380.
- ISO 527-2. Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics. International Organization for Standardization, Geneva, Switzerland, 2012.
- De Moura M, De Morais AB. Equivalent crack based analyses of ENF and ELS tests. Eng Fract Mech. 2008;75(9):2584–2596.
- Wang H, Vu-Khanh T, Le VN. Effects of large deflection on mode II fracture test of composite materials. J Compos Mater. 1995;29(6):833–849.
- Carraro PA, Meneghetti G, Quaresimin M, et al. Crack propagation analysis in composite bonded joints under mixed-mode (I + II) static and fatigue loading: experimental investigation and phenomenological modelling. J Adhes Sci Technol. 2013;27(11):1179–1196.
- Chen Q, Guo H, Avery K, et al. Fatigue performance and life estimation of automotive adhesive joints using a fracture mechanics approach. Eng Fract Mech. 2017;172:73–89.
- Chen Q, Guo H, Hill DJ, et al. Fatigue durability assessment of automotive adhesive joints by an in situ corrosion fatigue test. J Adhes Sci Technol. 2016;30(15):1610–1621.
- Jamali J, Fan Y, Wood JT. The mixed-mode fracture behavior of epoxy by the compact tension shear test. Int J Adhes Adhes. 2015;63:79–86.
- Legendre J, Créac’hcadec R, Gilbert F, et al. A new method to measure the adhesion capability of the metallic surface under shear loading using a modified Arcan test. J Adhes. 2017;94:1017–1035.
- Nourani A, Akbari S, Spelt JK. Comparison of solder joint fracture behavior in Arcan and DCB specimens. Eng Fract Mech. 2015;143:47–62.
- Hasanpour R, Choupani N. Rock fracture characterization using the modified Arcan test specimen. Int J Rock Mech Mining Sci. 2009;46(2):346–354.
- ASTM-D5379/D5379M-12. Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method. ASTM International, West Conshohocken, PA, 2012.
- Chen Q, Guo H, Avery K, et al. Mixed-mode fatigue crack growth and life prediction of an automotive adhesive bonding system. Eng Fract Mech. 2018;189:439–450.
- Hafiz TA, Abdel-Wahab MM, Crocombe AD, et al. Mixed-mode fatigue crack growth in FM73 bonded joints. Int J Adhes Adhes. 2013;40:188–196.
- Pirondi A, Nicoletto G. Mixed Mode I/II fatigue crack growth in adhesive joints. Eng Fract Mech. 2006;73(16):2557–2568.
- Braham A, Buttlar WG, Marasteanu MO. Effect of binder type, aggregate, and mixture composition on fracture energy of hot-mix asphalt in cold climates. Transport Res Rec. 2007;2001(1):102–109.
- Barenblatt GI. On equilibrium cracks formed in brittle fracture. Soviet Physics Doklady. 1960;4:455–460.
- Barenblatt GI. The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech. 1962;7:55–129.
- Hillerborg A, Modéer M, Petersson PE. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concrete Res. 1976;6(6):773–781.
- Fernandes RL, Campilho R. Testing different cohesive law shapes to predict damage growth in bonded joints loaded in pure tension. J Adhes. 2017;93(1–2):57–76.
- de Morais AB. Analysis of the fracture process zone and effective crack length in the adhesively bonded end-notched flexure specimen. J Adhes. 2018;95:1–26.
- Han X, Crocombe AD, Anwar SNR, et al. The strength prediction of adhesive single lap joints exposed to long term loading in a hostile environment. Int J Adhes Adhes. 2014;55:1–11.
- Banea MD, da Silva LFM, Campilho R. Mode II fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study. J Adhes. 2012;88(4–6):534–551.
- Campilho R, Banea MD, Pinto AMG, et al. Strength prediction of single- and double-lap joints by standard and extended finite element modelling. Int J Adhes Adhes. 2011;31(5):363–372.
- Hu P, Han X, da Silva LFM, et al. Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model. Int J Adhes Adhes. 2013;41:6–15.
- Han X, Chao Y, Zhang W, et al. Study on the effect of post curing on the mode II fracture energy of structural adhesive using a parameter identification approach. Int J Adhes Adhes. 2019;95:102398.
- Karachalios EF, Adams RD, da Silva L. Single lap joints loaded in tension with high strength steel adherends. Int J Adhes Adhes. 2013;43:81–95.