Performance of glulam beams produced with free-formaldehyde adhesive and underexploited rubber wood treated with preservatives solutions of chromated copper borate and pyrethroids

References

• Nakanishi EYY, Cabral MRR, Gonçalves PS, et al. Formaldehyde-free particleboards using natural latex as the polymeric binder. J Clean Prod. 2018;195:1259–1269.
   Web of Science ®Google Scholar
• Mohsin M, Farooq U, Raza ZA, et al. Performance enhancement of wool fabric with environmentally-friendly bio-cross-linker. J Clean Prod. 2014;68:130–134.
   Web of Science ®Google Scholar
• Mohsin M, Ahmad SW, Khatri A, et al. Performance enhancement of fire retardant finish with environment friendly bio cross-linker for cotton. J Clean Prod. 2013;51:191–195.
   Web of Science ®Google Scholar
• Mohsin M, Sarwar N, Ahmad S, et al. Maleic acid crosslinking of C-6 fluorocarbon as oil and water repellent finish on cellulosic fabrics. J Clean Prod. 2016;112(4):3525–3530.
   Google Scholar
• Eufrade Junior HJ, Ohto JM, Silva LL, et al. Potential of rubberwood (Hevea brasiliensis) for structural use after the period of latex extraction: a case study in Brazil. J Wood Sci. 2015;61(4):384–390.
   Web of Science ®Google Scholar
• Mathur VK. Composite materials from local resources. Constr Build Mater. 2006;20(7):470–477.
   Web of Science ®Google Scholar
• Okino EYA, Souza MR, Santana MAE, et al. Cement-bonded particleboard of Hevea brasiliensis Müll. Rev Árvore. 2004;28(3):451–457.
   Google Scholar
• Okino EYA, Teixeira DE, Souza MR, et al. Oriented strand board made of pine, cypress and rubberwood. Floresta. 2009;39(2):457–468.
   Google Scholar
• Muzel SD, Lima LR, Gava M, et al. Multilayer medium density particleboard using castor oil-based polyurethane resin and Hevea brasiliensis wood. Adv Mater Res. 2014;1025–1026:559–563.
   Google Scholar
• Segundinho PGA, Calil Neto C, Dias AA, et al. Evaluation of Brazilian reforestation species in glulam beams before and after preservative chemical treatments. Int J Mater Eng. 2014;4(6):192–195.
   Google Scholar
• Nadir Y, Nagarajan P. The behavior of horizontally glued laminated beams using rubber wood. Constr Build Mater. 2014;55:398–405.
   Web of Science ®Google Scholar
• Hu J, Shen Y, Pang S, et al. Application of hinokitiol potassium salt for wood preservative. J Environ Sci. 2013;25(1):S32–S35.
   Google Scholar
• Gerengi H, Tascioglu C, Akcay C, et al. Impact of copper chrome boron (CCB) wood preservative on the corrosion of St37 steel. Ind Eng Chem Res. 2014;53(49):19192–19198.
   Web of Science ®Google Scholar
• Peylo A, Willeitner H. The problem of reducing the leachability of boron by water repellents. Holzforschung. 1995;49(3):211–216.
   Web of Science ®Google Scholar
• Calil Neto C, Christoforo AL, Filho SLMR, et al. Evaluation of strength to shear and delamination in glued laminated wood. Ciência Florestal. 2014;24(4):989–996.
   Web of Science ®Google Scholar
• American Society for Testing and Materials. D143-14: standard test methods for small clear specimens of timber. Philladelphia, 2014. 31 p.
   Google Scholar
• Brazilian Association of Technical Standards. NBR 7190: design of wooden structures. Rio de Janeiro, 1997. 107 p.
   Google Scholar
• International Association of Wood Anatomists. List of microscopic features for hardwood identification. IAWA Bullet. 1989;10:221–359.
   Google Scholar
• Brazilian Association of Technical Standards. NBR 14853: determination of soluble matter in ethanol–toluene and in dichloromethane and in acetone. Rio de Janeiro, 2010. 3 p.
   Google Scholar
• Brazilian Association of Technical Standards. NBR 7989: pulp and wood – determination of acid-insoluble lignin. Rio de Janeiro, 2010. 6 p.
   Google Scholar
• Brazilian Association of Technical Standards. NBR 13999: paper, board, pulps and wood – determination of residue (ash) on ignition at 525 °C. Rio de Janeiro, 2017. 5 p.
   Google Scholar
• Lelis R. On the importance of the core constituents of compulsorily harvested conifer trees in the production of moisture-resistant and biologically resistant chipboard, using the example of Douglas fir (Pseudotsuga menziesii Mirb. Franco). Tesis, University of Göttingen; 1995.
   Google Scholar
• American National Standard. A190.1: standard for wood products – structural glued laminated timber. New York, 2017. 41 p.
   Google Scholar
• Forest Products Laboratory. Wood handbook – wood as an engineering material. Wisconsin, 2010. 509 p.
   Google Scholar
• Stokke DD, Wu Q, Han G. 2014. Introduction to wood and natural fiber composites. Chichester, West Sussex: Wiley.
   Google Scholar
• Shmulsky R, Jones PD. 2011. Forest products and wood science: an introduction. 6th ed. Hoboken (NJ): Wiley-Blackwell.
   Google Scholar
• American Society for Testing and Materials. D905-08: standard test method for strength properties of adhesive bonds in shear by compression loading. Philladelphia, 2013. 5 p.
   Google Scholar
• American Society for Testing and Materials. D198-15: standard test methods of static tests of lumber in structural sizes. Philladelphia, 2015. 28 p.
   Google Scholar
• Albino VCS, Mori FA, Mendes LM. Study of the interface wood – adhesive joints glued with resorcinol–formaldehyde and wood from Eucalyptus grandis w. Hill Ex Maiden. Sci For. 2010;38(87):509–516.
   Google Scholar
• Mady FTM. Course in physics of wood, mechanical properties. Universidade Federal do Amazonas: Universidade Federal do Amazonas; 2010.
   Google Scholar
• Hara MM, Matoski A, Magajewski C, et al. Resistance to shear parallel to wood fiber by stress induced puncturing. Rev Eng Constr Civil. 2014;1(2):40–54.
   Google Scholar
• Riyaphan J, Phumichai T, Neimsuwan T, et al. Variability in chemical and mechanical properties of Pará rubber (Hevea brasiliensis) trees. ScienceAsia. 2015;41(4):251–258.
   Web of Science ®Google Scholar
• Braz RL, Oliveira JTS, Rosado AM, et al. Anatomical, physical and chemical characterization of Eucalyptus clones grown in areas subject to action of winds. Braz J Wood Sci. 2014;5(2):127–137.
   Google Scholar
• Santini EJ. Biodeterioration and preservation of wood. Santa Maria: CEPEF/FATEC; 1988.
   Google Scholar
• Klitzke RJ. Drying of wood. In: Oliveira JTS, Fiedler NC, Nogueira M. Technologies applied to the timber sector. Universidade Federal do Espírito Santo, Jerônimo Monteiro; 2007.
   Google Scholar
• Iwakiri S. Panels wood reconstituted. Curitiba: Fupef; 2005.
   Google Scholar
• Paes JB, Neto PNM, Lima CR, et al. Effects of extractives and ash on natural resistance of four woods to xylophogous termites. Cerne. 2013;19(3):399–405.
   Web of Science ®Google Scholar
• Tsoumis G. Science and technology of wood: structure, properties, utilization. New York: Van Nostrand Reinhold; 1991.
   Google Scholar
• Okino EYA, Resck IS, Santana MAE, et al. Evaluation of wood chemical constituents of Hevea brasiliensis and Cupressus decomposed by Gloeophyllum striatum using CP/MAS 13C NMR and HPLC techniques. J Trop For Sci. 2010;22(2):184–196.
   Web of Science ®Google Scholar
• Hsing TY, Paula NF, Paula RC. Dendrometric and chemical traits and basic density wood of Eucalyptus grandis × Eucalyptus urophylla hybrids. Ciênc Florest. 2016;26(1):273–283.
   Web of Science ®Google Scholar
• Boa AC, Gonçalves FG, Oliveira JTS, et al. Eucalypts timber wastes glued with urea formaldehyde resin at room temperature. Sci For. 2014;42(102):279–288.
   Google Scholar
• Winandy JE. Effects of treatment and redrying on mechanical properties of wood. Madison, Wisconsin: Forest Products Laboratory. p. 54–62.
   Google Scholar
• Abruzzi RC, Pires MR, Dedavid BA, et al. Relationship between mechanical properties and density of the eucalyptus wood poles with their deterioration staturs. Árvore. 2012;36(6):1173–1181.
   Google Scholar
• Khadafi M, Anshari B, Fajrin J. Experimental investigation on flexural properties of glulam timber beam reinforced by bamboo strips. Int J Civil Eng Technol. 2018;9(5):69–76.
   Google Scholar
• Icimoto FH, Calil Neto C, Ferro FS, et al. Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa. Int J Mater Eng. 2016;6(2):51–55.
   Google Scholar
• American Wood Preservers’ Association. The AWPA book of standards. Philadelphia; 1994.
   Google Scholar
• Winandy JE, Barnes HM, Mitchell PH. The effect of initial and post-treatment drying temperature on the tensile strength of CCA-treated southern pine. J Mater Civ Eng. 1992;4(3):240–251.
   Google Scholar
• Segundinho PGA, Gonçalves FG, Gava GC, et al. Efficiency of the glue line in the treated wood Eucalyptus cloeziana F. Muell for glued laminated (glulam) beams production. Matéria. 2017;22(2).
   Google Scholar
• Vick CB. Adhesive bonding of wood materials. Wood handbook: wood as an engineering material. Madison, WI: USDA Forest Service, Forest Products Laboratory, 1999. General technical report FPL, 1999.
   Google Scholar
• Bertolini MS, Christoforo AL, Ferro FS. Wood treated with CCA and CCB in the production of particle board: comparative performance. Vol. 14. In: Brazilian meeting on timber and timber structures; 2014. p. 28.
   Google Scholar
• Steiger R, Arnold M, Risi W. Integrity check of structural softwood glue lines: correspondence between delamination and block shear tests. Eur J Wood Prod. 2014;72(6):735–748.
   Web of Science ®Google Scholar