References
- DiSalvo FJ. Thermoelectric cooling and power generation. Science. 1999;285(5428):703.
- Harman TC, Walsh MP, LaForge BE, et al. Nanostructured thermoelectric materials. J Elec Mater. 2005;34(5):L19–L22.
- Bell LE. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science. 2008;321(5895):1457–1461.
- Wang H, Porter WD, Böttner H, et al. Transport properties of bulk thermoelectrics: An International Round-Robin Study, part II: thermal diffusivity, specific heat, and thermal conductivity. J Elec Mater. 2013;42(6):1073–1084.
- Snyder GJ, Toberer ES. Complex thermoelectric materials. Nature Mater. 2008;7(2):105–114.
- Kambe M, Jinushi T, Ishijima Z. Encapsulated thermoelectric modules and compliant pads for advanced thermoelectric systems. J Elec Mater. 2010;39(9):1418–1421.
- Guo JQ, Geng HY, Ochi T, et al. Development of scutterodite thermoelectric materials and modules. J Elec Mater. 2012;41(6):1036.
- Brostow W, Granowski G, Hnatchuk N, et al. Thermoelectric phenomena. J Mater Ed. 2014;36:175.
- Brostow W, Sayana S, Sharp J, et al. Thermoelectric materials. J Mater Ed. 2017;39:259.
- Brostow W, Hagg Lobland HE. Materials: introduction and applications. John Wiley & Sons; 2017.
- Lu QB. Cosmic-ray driven reaction and greenhouse effect of halogenated molecules: Culprits for atmospheric ozone depletion and global climate change. Int J Mod Phys B. 2013;27(17):1350073.
- Dong H, Li X, Huang X, et al. Improved oxidation resistance of thermoelectric skutterudites coated with composite glass. Ceram Int. 2013;39(4):4551–4557.
- El-Genk MS, Saber HH, Caillat T, et al. Test results and performance comparisons of coated and un-coated skutterudite based segmented unicouples. Energy Convers. Manag. 2006;48:1383.
- Dynys FW, Nathal MV, Nesbitt JA, et al. Resarch and Technology, 2006. Cleveland, Ohio: NASA Glenn Research Center; 2006. p. 254.
- Zawadzka K, Godlewska E, Mars K, et al. Thermoelectric properties of magnesium silicide prepared by self-propagating high temperature synthesis. In 9th European Conference Thermoelectric AIP Conference Proceedings, Thessaloniki, Greece; 2012. p. 231–234.
- Zawadzka K, Godlewska E, Mars K, et al. Enhancement of oxidation resistance of CoSb3 thermoelectric material by glass coating. Mater Design. 2017;119:65–75.
- Jones S, Sakamoto J. Applications of aerogels in space exploration. New York: Springer; 2011. p. 721–746.
- Ping W, ChungLei D, Wen-Yu Z, et al. Enhancement of thermal stability of filled skutterudite thermoelectric materials through nano-SiO2 Coating. J Inorg Mater. 2010;25:577.
- Brostow W, Datashvili T, Hagg Lobland HE, et al. Bismuth telluride-based thermoelectric materials: coatings as protection against thermal cycling effects. J Mater Res. 2012;27(22):2930.
- Yuan Y, Lee TR. Contact angle and wetting properties. Berlin, Heidelberg, New York: Springer Verlag; 2013. p. 3–34.
- de Ruijter M, Kölsch P, Voué M, et al. Effect of temperature on the dynamic contact angle. Colloids Surf A Physicochem Eng Asp. 1998;144(1–3):235–243.
- Bauer JF. Wettability. J Valid Technol. 2010;16:32.
- Kaplan WD, Chatain D, Wynblatt P, et al. A review of wetting versus adsorption, complexions, and related phenomena: the Rosetta stone of wetting. J Mater Sci. 2013;48(17):5681–5717.
- Dodiuk H, Kenig S, Dotan A. Do self-cleaning surfaces repel ice? J Adh Sci Tech. 2012;26:701–714.
- Kar MK. Micromechanics of wear at polymer-metal sliding interface [PhD Thesis]. Ames, Iowa: Iowa State University; 1978.
- Grujicic M, Sellappan V, Omar MA, et al. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components. J Mater Proc Tech. 2008;197(1–3):363–373.
- Kah P, Suoranta R, Martikainen J, et al. Techniques for joining dissimilar materials. Rev Adv Mater Sci. 2014;36:152–164.
- Dughaish ZH. Lead telluride as a thermoelectric material for thermoelectric power generation. Physica B. 2002;322(1–2):205–223.
- Eustathopolulos N, Sobczak N, Passerone A, et al. Measurement of contact angle and work of adhesion at high temperatures. J Mater Sci. 2005;40:2271.
- Zisman WA. Relation of the equilibrium contact angle to liquid and solid constitution. Washington: American Chemical Society; 1964. p. 1–51.
- Cameron A, Winmeijer F. An R-squared measure of goodness of fit for some common nonlinear regression models. J Econometrics. 1997;77:329–342.
- Janczewski Ł, Toboła D, Brostow W, et al. Effects of ball burnishing on surface properties of low density polyethylene. Tribology Internat. 2016;93:36–42.
- Padday JF. Spreading, wetting, and contact angles. J Adh Sci Tech. 2012;26:1347–1358.
- Whyman G, Bormashenko E. Wetting transitions on rough substrates: general considerations. J Adh Sci Tech. 2012;26:207–220.