Effects of voltage on the components of surface integrity of Al₂O₃ ceramic coatings on AA2024 by plasma electrolytic oxidation

References

• Dong H. Surface engineering of light alloys: aluminium, magnesium and titanium alloys. Sawston (UK): Woodhead Publishing; 2010.
   Google Scholar
• Heinz A, Haszler A, Keidel C, et al. Recent development in aluminium alloys for aerospace applications. Mat Sci Eng a-Struct. 2000;280(1):102–107.
   Google Scholar
• Cui L, Zeng R, Guan S, et al. Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: the influence of porosity. J Alloys Compd. 2017;695:2464–2476.
   Web of Science ®Google Scholar
• Tran Q, Sun J, Kuo Y, et al. Anomalous layer-thickening during micro-arc oxidation of 6061 Al alloy. J Alloys Compd. 2017;697:326–332.
   Web of Science ®Google Scholar
• Ji S, Weng Y, Wu Z, et al. Excellent corrosion resistance of P and Fe modified micro-arc oxidation coating on Al alloy. J Alloys Compd. 2017;710:452–459.
   Web of Science ®Google Scholar
• Rao Y, Wang Q, Oka D, et al. On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof. Surf Coatings Technol. 2020;383:125271.
   Web of Science ®Google Scholar
• Pereira D, Oliveira JP, Santos TG, et al. Aluminium to carbon fibre reinforced polymer tubes joints produced by magnetic pulse welding. Compos Struct. 2019;230:111512.
   Web of Science ®Google Scholar
• Li Z, Di S. Preparation and properties of micro-arc oxidation self-lubricating composite coatings containing paraffin. J Alloys Compd. 2017;719:1–14.
   Web of Science ®Google Scholar
• Xu JL, Xiao QF, Mei DD, et al. Microstructure, corrosion resistance and formation mechanism of alumina micro-arc oxidation coatings on sintered NdFeB permanent magnets. Surf Coatings Technol. 2017;309:621–627.
   Web of Science ®Google Scholar
• Wang P, Wu T, Xiao YT, et al. Characterization of micro-arc oxidation coatings on aluminum drillpipes at different current density. Vaccum. 2017;142:21–28.
   Web of Science ®Google Scholar
• Chen C, Chu H, He J. Anodic dyeing of micro-arc oxidized aluminum with a cathodic pretreatment. Surf Coat Technol. 2017;324:92–98.
   Web of Science ®Google Scholar
• Grimm M, Conze S, Berger L-M, et al. Microstructure and sliding wear resistance of plasma sprayed Al2O3-Cr2O3-TiO2 ternary coatings from blends of single oxides. Coatings. 2020;10(1):42.
   Web of Science ®Google Scholar
• Yu JM, Choe HC. Morphology changes and bone formation on PEO-treated Ti6Al4V alloy in electrolyte containing Ca, P, Sr, and Si ions. Appl Surf Sci. 2019;477:121–130.
   Web of Science ®Google Scholar
• Ding ZY, Wang YH, Ouyang JH, et al. Influence of Al2O3 addition in NaAlO2 electrolyte on microstructure and high-temperature properties of plasma electrolytic oxidation ceramic coatings on Ti2AlNb alloy. Surf Coatings Technol. 2019;370:187–195.
   Web of Science ®Google Scholar
• Sedelnikova MB, Komarova EG, Sharkeev YP, et al. Modification of titanium surface via Ag-, Sr- and Si-containing micro-arc calcium phosphate coating. Bioact Mater. 2019;4:224–235.
   PubMed Web of Science ®Google Scholar
• Li ZY, Cai ZB, Ding Y, et al. Characterization of graphene oxide/ZrO2 composite coatings deposited on zirconium alloy by micro-arc oxidation. Appl Surf Sci. 2020;506.144928.
   Web of Science ®Google Scholar
• Cheng Z, Yang W, Xu D, et al. Improvement of high temperature oxidation resistance of micro arc oxidation coated AlTiNbMo0.5Ta0.5Zr high entropy alloy. Mater Lett. 2020;262:127192.
   Web of Science ®Google Scholar
• Gheytani M, Aliofkhazraei M, Bagheri HR, et al. Wettability and corrosion of alumina embedded nanocomposite MAO coating on nanocrystalline AZ31B magnesium alloy. J Alloys Compd. 2015;649:666–673.
   Web of Science ®Google Scholar
• Gu Y, Ma H, Yue W, et al. Microstructure and corrosion model of MAO coating on nano grained AA2024 pretreated by ultrasonic cold forging technology. J Alloys Compd. 2016;681:120–127.
   Web of Science ®Google Scholar
• Yeh RY, Hsu RQ. Application of porous oxide layer in plastic/metal direct adhesion by injection molding. J Adhes Sci Technol. 2015;29(15):1617–1627.
   Web of Science ®Google Scholar
• Adeleke SA, Bushroa AR, Kusumawan Herliansyah M, et al. Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. J Adhes Sci Technol. 2018;32(1):91–102.
   Web of Science ®Google Scholar
• Yang W, Gao Y, Guo P, et al. Adhesion, biological corrosion resistance and biotribological properties of carbon films deposited on MAO coated Ti substrates. J Mech Behav Biomed Mater. 2020;101:103448.
   PubMed Web of Science ®Google Scholar
• Ma Y, Yang J, Tian X, et al. Microstructure, adhesion, mechanical and corrosion properties of TiN coatings deposited by high energy pulse-enhanced vacuum arc evaporation. J Adhes Sci Technol. 2019;1-2. 10.1080/01694243.2019.1690774
   Web of Science ®Google Scholar
• Yerokhin A, Nie X, Leyland A, et al. Plasma electrolysis for surface engineering. Surf Coatings Technol. 1999;122(2–3):73–93.
   Web of Science ®Google Scholar
• Masiha HR, Bagheri HR, Gheytani M, et al. Effect of surface nanostructuring of aluminum alloy on post plasma electrolytic oxidation. Appl Surf Sci. 2014;317:962–969.
   Web of Science ®Google Scholar
• Chang F-C, Wang C-J, Lee J-W, et al. Microstructure and mechanical properties evaluation of molybdenum disulfide-titania nanocomposite coatings grown by plasma electrolytic oxidation. Surf Coatings Technol. 2016;303:68–77.
   Web of Science ®Google Scholar
• Arslan E, Totik Y, Demirci EE, et al. Wear and adhesion resistance of duplex coatings deposited on Ti6Al4V alloy using MAO and CFUBMS. Surf Coatings Technol. 2013;214:1–7.
   Web of Science ®Google Scholar
• Arslan E, Totik Y, Demirci EE, et al. High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation. Surf Coatings Technol. 2009;204(6–7):829–833.
   Web of Science ®Google Scholar
• Yerokhin A, Snizhko LO, Gurevina NL, et al. Discharge characterization in plasma electrolytic oxidation of aluminium. J Phys D: Appl Phys. 2003;36(17):2110–2120.
   Web of Science ®Google Scholar
• Ahmadi NP, Khosroshahi RA, Asl BB. Deposition of oxide layer on aluminium via plasma electrolysis method in alkali solutions by unipolar pulsed current system and study of its physical properties. Asian J Appl Sci. 2009;2(1):74–82.
   Google Scholar
• Sukuroglu EE, Farzi H, Sukuroglu S, et al. The effect of plasma electrolytic oxidation process parameters on the tribocorrosion properties of TiO2 coatings. J Adhes Sci Technol. 2017;31(12):1361–1373.
   Web of Science ®Google Scholar
• Rahimi S, Khiabani AB, Yarmand B, et al. Comparison of corrosion and antibacterial properties of Al alloy treated by plasma electrolytic oxidation and anodizing methods. Mater Today: Proc. 2018;5(7):15667–15676.
   Google Scholar
• Yang X, Chen L, Jin X, et al. Influence of temperature on tribological properties of microarc oxidation coating on 7075 aluminium alloy at 25 °C–300 °C. Ceram Int. 2019;45(9):12312–12318.
   Web of Science ®Google Scholar
• Liu Y-F, Liskiewicz T, Yerokhin A,AK-B, et al. Fretting wear behavior of duplex PEO/chameleon coating on Al alloy. Surf Coatings Technol. 2018;352:238–246.
   Web of Science ®Google Scholar
• Haghighat-Shishavan B, Azari-Khosrowshahi R, Haghighat-Shishavan S, et al. Improving wear and corrosion properties of alumina coating on AA7075 aluminum by plasma electrolytic oxidation: effects of graphite absorption. Appl Surf Sci. 2019;481:108–119.
   Web of Science ®Google Scholar
• Aliasghari S, Skeldon P, Zhou X, et al. Influence of PEO and mechanical keying on the strength of AA 5052 alloy/polypropylene friction stir spot welded joints. Int J Adhes Adhes. 2019;92:65–72.
   Web of Science ®Google Scholar
• Pezzato L, Rigon M, Martucci A, et al. Plasma electrolytic oxidation (PEO) as pre-treatment for sol-gel coating on aluminum and magnesium alloys. Surf Coatings Technol. 2019;366:114–123.
   Web of Science ®Google Scholar
• Zhang JH, Zhang QJ, Wu CL, et al. Investigation of properties of electric arc ion deposited TiN coating on Al2O3-based ceramic composite. J Adhes Sci Technol. 2003;17(6):861–869.
   Web of Science ®Google Scholar
• Rudnev VS, Kharitonskii PV, Kosterov A, et al. Magnetism of Fe-doped Al2O3 and TiO2 layers formed on aluminum and titanium by plasma-electrolytic oxidation. J Alloys Compd. 2020;816:152579.
   Web of Science ®Google Scholar
• Zhang X, Wu Y, Wang J, et al. Microstructure, formation mechanism and antifouling property of multi-layered Cu-incorporated Al2O3 coating fabricated through plasma electrolytic oxidation. Ceram Int. 2020;46(3):2901–2909.
   Web of Science ®Google Scholar
• Almeida G, Gonzalez J, Rosado L, et al. Advances in NDT and materials characterization by eddy currents. Procedia CIRP. 2013;7:359–364.
   Google Scholar
• Santos TG, Fernandes FB, Bernardo G, et al. Analyzing mechanical properties and nondestructive characteristics of brazed joints of NiTi shape memory alloys to carbon steel rods. Int J Adv Manuf Technol. 2013;66(5–8):787–793.
   Web of Science ®Google Scholar
• Santos TG, Miranda RM, Vilaça P, et al. Modification of electrical conductivity by friction stir processing of aluminum alloys. Int J Adv Manuf Technol. 2011;57(5–8):511–519.
   Web of Science ®Google Scholar
• Sorger GL, Oliveira JP, Inácio PL, et al. Non-destructive microstructural analysis by electrical conductivity: comparison with hardness measurements in different materials. J Mater Sci Technol. 2019;35(3):360–368.
   Web of Science ®Google Scholar
• Antin KN, Machado MA, Santos TG, et al. Evaluation of different non-destructive testing methods to detect imperfections in unidirectional carbon fiber composite ropes. J Nondestruct Eval. 2019;38(1):23–35.
   Web of Science ®Google Scholar
• Yerokhin AL, Nie X, Leyland A, et al. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti6Al4V alloy. Surf Coatings Technol. 2000;130(2–3):195–206.
   Web of Science ®Google Scholar
• Rama-Krishna L, Somaraju KR, Sundararajan G. The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation. Surf Coatings Technol. 2003;163:484–490.
   Web of Science ®Google Scholar
• Wu W, Zhang F, Li Y, et al. Corrosion resistance of dodecanethiol-modified magnesium hydroxide coating on AZ31 magnesium alloy. Appl Phys A. 2020;126(1):8.
   Web of Science ®Google Scholar
• Wang JH, Du M-H, Han FZ, et al. Effects of the ratio of anodic and cathodic currents on thecharacteristics of micro-arc oxidation ceramic coatings on Al alloys. Appl Surf Sci. 2014;292:658–664.
   Web of Science ®Google Scholar
• Wei TB, Yan FY, Tian J. Characterization and wear- and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy. J Alloys Compd. 2005;389(1–2):169–176.
   Web of Science ®Google Scholar
• Wu HH, Jin ZS, Long BY, et al. Characterization of microarc oxidation process on aluminum alloy. Chin Phys Lett. 2003;20(10):1815–1818.
   Web of Science ®Google Scholar
• Tran Q-P, Kuo YC, Sun JK, et al. High quality oxide-layers on Al-alloy by micro-arc oxidation using hybrid voltages. Surf Coatings Technol. 2016;303-A:61–67.
   Web of Science ®Google Scholar