References
- Gluzman R, Katz RV, Frey BJ, et al. Prevention of root caries: a literature review of primary and secondary preventive agents. Spec Care Dentist. 2013;33(3):133–140.
- Burgess JO, Gallo JR. Treating root-surface caries. Dent Clin of North Am. 2002;46(2):385–404.
- Heegaard KM, Holm-Pedersen P, Bardow A, et al. The copenhagen oral health senior cohort: design, population and dental health. Gerodontology. 2011;28(3):165–176.
- Krejci I, Planinic M, Stavridakis M, et al. Resin composite shrinkage and marginal adaptation with different pulse-delay light curing protocols. Eur J Oral Sci. 2005;113(6):531–536.
- Van Ende A, De Munck J, Van Landuyt KL, et al. Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin. Dent Mater. 2013;29(3):269–277.
- Rees JS. The effect of variation in occlusal loading on the development of abfraction lesions: a finite element study. J Oral Rehabil. 2002;29(2):188–193.
- Arısu HD, Uctaslı MB, Eliguzeloglu E, et al. The effect of occlusal loading on the microleakage of class V restorations. Oper Dent. 2008;33(2):135–141.
- Ferracane JL, Mitchem JC. Relationship between composite contraction stress and leakage in class V cavities. Am J Dent. 2003;16(4):239–243.
- Ben-Amar A, Pilo P, Shapinko E, et al. A microleakage study of single-bottle adhesives applied to enamel and cementum and aged by both occlusal loading and thermocycling. Quintessence Int. 2005;36(3):177–182.
- Schwendicke F, Göstemeyer G, Blunck U, et al. Directly placed restorative materials: review and network meta-analysis. J Dent Res. 2016;95(6):613–622.
- Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater. 2005;21(10):962–970.
- Yoshikawa T, Burrow MF, Tagami J. A light curing method for improving marginal sealing and cavity wall adaptation of resin composite restorations. Dent Mater. 2001;17(4):359–366.
- Van Dijken JW, Lindberg A. A 15-year randomized controlled study of a reduced shrinkage stress resin composite. Dent Mater. 2015;31(9):1150–1158.
- Bedran-de-Castro AK, Pereira PNR, Pimenta LAF, et al. The effect of thermal and mechanical load cycling on nanolekage of class II restorations. J Adhes Dent. 2004;6(3):221–226.
- Hermesch CB, Wall BS, McEntire JF. Dimensional stability of dental restorative materials and cement over four years. Gen Dent. 2003;51(6):518–523.
- Sun J, Eidelman N, Lin-Gibson S. 3D mapping of polymerization shrinkage using X-ray micro-computed tomography to predict microleakage. Dent Mater. 2009;25(3):314–320.
- Zeiger DN, Sun J, Schumacher GE, et al. Evaluation of dental composite shrinkage and leakage in extracted teeth using X-ray microcomputed tomography. Dent Mater. 2009;25(10):1213–1220.
- Kaisarly D, Gezawi ME. Polymerization shrinkage assessment of dental resin composites: a literature review. Odontology. 2016;104(3):257–270.
- Tanumiharja M, Burrow MF, Tyas MJ. Microtensile bond strengths of seven dentin adhesive systems. Dent Mater. 2000;16(3):180–187.
- Algamaiah H, Sampaio CS, Rigo LC, et al. Microcomputed tomography evaluation of volumetric shrinkage of bulkfill composites in class II cavities. J Esthet Restor Dent. 2017;29(2):118–127.
- Jacker-Guhr S, Ibarra G, Oppermann LS, et al. Evaluation of microleakage in class V composite restorations using dye penetration and micro-CT. Clin Oral Invest. 2016;20(7):1709–1718.
- Hirata R, Clozza E, Giannini M, et al. Shrinkage assessment of low shrinkage composites using micro-computed tomography. J Biomed Mater Res Part B Appl Biomater. 2015;103(4):798–806.
- Oglakci B, Kazak M, Donmez N, et al. The use of a liner under different bulk-fill resin composites: 3D gap formation analysis by x-ray microcomputed tomography. J Appl Oral Sci. 2020;28:e20190042.
- Morresi AL, D'Amario M, Capogreco M, et al. Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review. J Mech Behav Biomed Mater. 2014;29:295–308.
- Sakaguchi RL, Douglas WH, Delong R, et al. The wear of a posterior composite in an artificial mouth; a clinical correlation. Dent Mater. 1986;2(6):235–240.
- Chen HY, Manhart J, Hickel R, et al. Polymerization contraction stress in light-cured packable composite resins. Dent Mater. 2001;17(3):253–259.
- Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition. Dent Mater. 2006;22(6):515–526.
- El-Damanhoury H, Platt J. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent. 2014;39(4):374–382.
- Feilzer AJ, De Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res. 1987;66(11):1636–1639.
- Kim RYJ, Kim YJ, Choi NS, et al. Polymerization shrinkage, modulus, and shrinkage stress related to tooth-restoration interfacial debonding in bulk-fill composites. J Dent. 2015;43(4):430–439.
- Rizzante FAP, Duque JA, Duarte MAH, et al. Polymerization shrinkage, microhardness and depth of cure of bulk fill resin composites. Dent Mater J. 2019;38(3):403–410.
- Aguilar LT, Rezende NPM, Reis A, et al. Tensile bond strength of adhesive systems-effects of primer and thermocycling. Pesqui Odontol Bras. 2002;16(1):37–42.
- Frankenberger R, Tay FR. Self-etch and-rinse adhesives: effect of thermomechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater. 2005;21(5):397–412.
- Blackham JT, Vandewalle KS, Lien W. Properties of hybrid resin composite systems containing prepolymerized filler particles. Oper Dent. 2009;34(6):697–702.
- Vinay S, Shivanna V. Comparative evaluation of microleakage of fifth, sixth, and seventh generation dentin bonding agents: an in vitro study. J Conserv Dent. 2010;13(3):136–140.
- Kwon Y, Ferracane J, Lee IB. Effect of layering methods, composite type, and flowable liner on the polymerization shrinkage stress of light cured composites. Dent Mater. 2012;28(7):801–809.
- Senawongse P, Pongprueksa P, Tagami J. The effect of the elastic modulus of low-viscosity resins on the microleakage of Class V resin composite restorations under occlusal loading. Dent Mater J. 2010;29(3):324–329.
- Zhao XY, Li SB, Gu LJ, et al. Detection of marginal leakage of class V restorations in vitro by micro–computed tomography. Oper Dent. 2014;39(2):174–180.
- Yan Z, Sidhu SK, Carrick TE, et al. Response to thermal stimuli of glass ionomer cements. Dent Mater. 2007;23(5):597–600.
- Kidd EA, Beighton D. Prediction of secondary caries around tooth-colored restorations: a clinical and microbiological study. J Dent Res. 1996;75(12):1942–1946.
- Heymann HO, Sturdevant JR, Bayne S, et al. Examining tooth flexure effects on cervical restorations: a two-year clinical study. J Am Dent Assoc. 1991;122(5):41–44.
- Lassila L, Sailynoja E, Prinssi R, et al. Fracture behavior of bi-structure fiber-reinforced composite restorations. J Mech Behav Biomed Mater. 2020;101:103444..
- Scribante A, Bollardi M, Chiesa M, et al. Flexural properties and elastic modulus of different esthetic restorative materials: evaluation after exposure to acidic drink. Biomed Res Int. 2019;2019:5109481..
- Lassila L, Sailynoja E, Prinssi R, et al. Characterization of a new fiber-reinforced flowable composite. Odontology. 2019;107(3):342–352.
- Yancey EM, Lien W, Nuttall CS, et al. Properties of a new nanofiber restorative composite. Oper Dent. 2019;44(1):34–41.