Macro- and microstructure analysis and mechanical characteristics of thick AlMg5 alloy plates joined by floating-bobbin friction stir welding

References

• Imam M, Sun Y, Fujii H, et al. Microstructural characteristics and mechanical properties of friction stir welded thick 5083 aluminum alloy. Metall Mat Trans A. 2017;48(1):208–229.
   Web of Science ®Google Scholar
• Dickerson TL, Przydatek J. Fatigue of friction stir welds in aluminium alloys that contain root flaws. Int J Fatigue. 2003;25(12):1399–1409.
   Web of Science ®Google Scholar
• Guo C, Shen Y, Hou W, et al. Effect of groove depth and plunge depth on microstructure and mechanical properties of friction stir butt welded AA6061-T6. J Adhes Sci Technol. 2018;32(24):2709–2726.
   Web of Science ®Google Scholar
• Zhang H, Wang M, Zhang X, et al. Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum alloy. Mater Des. 2015;65:559–566.
   Web of Science ®Google Scholar
• Gupta MK. Effects of tool profile on mechanical properties of aluminium alloy Al 1120 friction stir welds. J Adhes Sci Technol. 2020;34:2000-2010.
   Web of Science ®Google Scholar
• Fuse K, Badheka V. Bobbin tool friction stir welding: a review. Sci Technol Weld Join. 2019;24(4):277–304.
   Web of Science ®Google Scholar
• Wang GQ, Zhao YH, Tang YY. Research progress of bobbin tool friction stir welding of aluminum alloys: a review. Acta Metall Sin (Engl Lett). 2020;33(1):13–29.
   Web of Science ®Google Scholar
• Zhou L, Li GH, Liu CL, et al. Effect of rotation speed on microstructure and mechanical properties of self-reacting friction stir welded Al–Mg–Si alloy. Int J Adv Manuf Technol. 2017;89(9–12):3509–3516.
   Web of Science ®Google Scholar
• Wang FF, Li WY, Shen J, et al. Effect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al–Li alloy. Mater Des. 2015;86:933–940.
   Web of Science ®Google Scholar
• Hou JC, Liu HJ, Zhao YQ. Influences of rotation speed on microstructures and mechanical properties of 6061-T6 aluminum alloy joints fabricated by self-reacting friction stir welding tool. Int J Adv Manuf Technol. 2014;73(5–8):1073–1079.
   Web of Science ®Google Scholar
• Wan L, Huang Y, Guo W, et al. Mechanical properties and microstructure of 6082-T6 aluminum alloy joints by self-support friction stir welding. J Mater Sci Technol. 2014;30:1243–1250.
   Web of Science ®Google Scholar
• Threadgill PL, Ahmed MMZ, Martin JP, et al. The use of bobbin tools for friction stir welding of aluminium alloys. MSF. 2010;638-642:1179–1184.
   Google Scholar
• Xu Y, Ke L, Mao Y, et al. Formation investigation of intermetallic compounds of thick plate Al/Mg alloys joint by friction stir welding. Materials. 2019;12(17):2661.
   PubMed Web of Science ®Google Scholar
• Yuqing M, Liming K, Fencheng L, et al. Investigations on temperature distribution, microstructure evolution, and property variations along thickness in friction stir welded joints for thick AA7075-T6 plates. Int J Adv Manuf Technol. 2016;86(1–4):141–154.
   Web of Science ®Google Scholar
• Standard test methods for determining average grain size ASTM E112-13. West Conshohocken: ASTM International; 2010.
   Google Scholar
• America A, Standard N. Specification for friction stir welding of aluminum alloys for aerospace applications. Am Weld Soc. 2010;1–60.
   Google Scholar
• Krishnan KN. On the formation of onion rings in friction stir welds. Mater Sci Eng A. 2002;327(2):246–251.
   Web of Science ®Google Scholar
• Schneider JA, Nunes AC, Brendel MS. The influence of friction stir weld tool form and welding parameters on weld structure and properties: nugget bulge in self-reacting friction stir welds. NASA technical report No. 20100024372; 1991.
   Google Scholar
• Buffa G, Campanile G, Fratini L, et al. Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties. Mater Sci Eng A. 2009;519(1–2):19–26.
   Web of Science ®Google Scholar
• Padmanaban G, Balasubramanian V, Sarin Sundar JK. Influences of welding processes on microstructure, hardness, and tensile properties of AZ31B magnesium alloy. J Materi Eng Perform. 2010;19(2):155–165.
   Web of Science ®Google Scholar
• Threadgill PL, Leonard AJ, Shercliff HR, et al. Friction stir welding of aluminium alloys. Int Mater Rev. 2009;54(2):49–93.
   Web of Science ®Google Scholar
• Ahmed MMZ, Wynne BP, Rainforth WM, et al. Effect of tool geometry and heat input on the hardness, grain structure, and crystallographic texture of thick-section friction stir-welded aluminium. Metall Mat Trans A. 2019;50(1):271–284.
   Web of Science ®Google Scholar
• Cao X, Jahazi M. Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy. Mater Des. 2011;32(1):1–11.
   Web of Science ®Google Scholar
• Liu HJ, Hou JC, Guo H. Effect of welding speed on microstructure and mechanical properties of self-reacting friction stir welded 6061-T6 aluminum alloy. Mater. Des. 2013;50:872–878.
   Web of Science ®Google Scholar
• Dong P, Li H, Sun D, et al. Effects of welding speed on the microstructure and hardness in friction stir welding joints of 6005A-T6 aluminum alloy. Mater Des. 2013;45:524–531.
   Web of Science ®Google Scholar
• Trueba L, Torres MA, Johannes LB, et al. Process optimization in the self-reacting friction stir welding of aluminum 6061-T6. Int J Mater Form. 2018;11(4):559–570.
   Web of Science ®Google Scholar
• Li J, Zhou X, Dong C, et al. Temperature fields in 6082 aluminum alloy samples Bobbin-tool friction stir welded. J Aeronaut Mater. 2013;33(5):36-40.
   Google Scholar
• Chen S, Li X, Jiang X, et al. The effect of microstructure on the mechanical properties of friction stir welded 5A06 Al Alloy. Mater Sci Eng A. 2018;735:382–393.
   Web of Science ®Google Scholar
• Lafly A-L, Alléhaux D, Marie F, et al. Microstructure and mechanical properties of the aluminium alloy 6056 welded by friction stir welding techniques. Weld World. 2006;50(11–12):98–106.
   Google Scholar
• Marie F, Allehaux D, Esmiller B. Development of the bobbin tool technique on various aluminum alloys. 5th International Friction Stir Welding Symposium, Metz, France. 2004.
   Google Scholar
• Li WY, Fu T, Hütsch L, et al. Effects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool friction-stir welded Mg AZ31. Mater Des. 2014;64:714–720.
   Web of Science ®Google Scholar
• Yang J, Wang D, Xiao BL, et al. Effects of rotation rates on microstructure, mechanical properties, and fracture behavior of friction stir-welded (FSW) AZ31 magnesium alloy. Metall Mat Trans A. 2013;44(1):517–530.
   Web of Science ®Google Scholar
• Chowdhury SH, Chen DL, Bhole SD, et al. Friction stir welded AZ31 magnesium alloy: microstructure, texture, and tensile properties. Metall Mat Trans A. 2013;44(1):323–336.
   Web of Science ®Google Scholar
• Sato YS, Urata M, Kokawa H, et al. Hall–Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys. Mater Sci Eng A. 2003;354(1–2):298–305.
   Web of Science ®Google Scholar
• Starink MJ, Deschamps A, Wang SC. The strength of friction stir welded and friction stir processed aluminum alloys. Scr Mater. 2008;58(5):377–382.
   Web of Science ®Google Scholar
• Mardalizadeh M, Khandaei M, Safarkhanian MA. Influence of travel speed on the microstructural evaluation and mechanical characteristics of Bobbin tool friction stir-welded thick AA5456-H112 plates. J Adhes Sci Technol. 2020;0(0):1–20. DOI: 10.1080/01694243.2020.1792156.
   Web of Science ®Google Scholar