References
- Guazzato M, Albakry M, Ringer SP, et al. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater. 2004;20(5):449–456.
- Tinschert J, Zwez D, Marx R, et al. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent. 2000;28(7):529–535.
- Malkondu Ö, Tinastepe N, Akan E, et al. An overviewof monolithic zirconia in dentistry. Biotechnol Biotechnol Equip. 2016;30(4):644–652.
- Zhang F, Inokoshi M, Batuk M, et al. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater. 2016;32:327–337.
- Munoz EM, Longhini D, Antonio SG, et al. The effects of mechanical and hydrothermal aging on microstructure and biaxial flexural strength of an anterior and a posterior monolithic zirconia. J Dent. 2017;63:94–102.
- Lawson NC, Jurado CA, Huang C-T, et al. Effect of surface treatment and cement on fracture load of traditional zirconia (3Y), translucent zirconia (5Y), and lithium disilicate crowns. J. Prosthodont. 2019;28(6):659–665.
- Alves MLL, Campos F, Bergoli CD, et al. Effect of adhesive cementation strategies on the bonding of Y-TZP to human dentin. Operative Dentistry. 2016;41(3):276–278.
- Srikanth R, Kosmac T, Della Bona A, et al. Effects of cementation surface modifications on fracture resistance of zirconia. Dent Mater. 2015;31(4):435–442.
- Campos TMB, Ramos NC, Machado JPB, et al. A new silica-infiltrated Y-TZP obtained by the sol-gel method. J Dent. 2016;48:55–61.
- May LG, Passos SP, Capelli DB, et al. Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic. J Biomed Mater Res. 2010;95B(1):69–74.
- Aboushelib MN1, Kleverlaan CJ, Feilzer AJ. Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prosthet Dent. 2007;98(5):379–388.
- Chai H, Kaizer M, Chughtai A, et al. On the Interfacial Fracture Resistance of Resin-Bonded Zirconia and Glass-Infiltrated Graded Zirconia. Dent Mater. 2015;31(11):1304–1311.
- Blatz MB, Alvarez M, Brindis SK. M: How to bond zirconia: the APC concept. Compend Contin Educ Dent. 2016;37:611–618.
- Anusavice KJ, Chiayi S. and H. Ralph Rawls, eds. Phillips’ science of dental materials. Elsevier Health Sciences, Saunders, Philadelphia, 2012.
- Feitosa SA, Patel D, Borges AL, et al. Effect of cleansing methods on saliva-contaminated zirconia—an evaluation of resin bond durability. Operat Dent. 2015;40(2):163–171.
- Eiriksson SO, Pereira PN, Swift EJ, Jr, et al. Effects of saliva contamination on resin-resin bond strength. Dent Mater. 2004;20(1):37–44.
- Yang B, Lange-Jansen HC, Scharnberg M, et al. Influence of saliva contamination on zirconia ceramic bonding. Dent Mater. 2008;24(4):508–513.
- Quaas AC, Yang B, Kern M. Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater. 2007;23(4):506–512.
- Zhang S, Kocjan A, Lehmann F, et al. Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic. Eur J Oral Sci. 2010;118(4):396–403.
- Güers P, Wille S, Strunskus T, et al. Durability of resin bonding to zirconia ceramic after contamination and the use of various cleaning methods. Dent Mater. 2019;35(10):1388–1396.
- Aboush YE. Removing saliva contamination from porcelain veneers before bonding. J Prosthet Dent. 1998;80(6):649–653.
- Chen H, Ding C. Nanostructured zirconia coating preparedby atmospheric plasma spraying. Surf Coat Technol. 2002;150(1):31–36.
- Han GJ, Chung SN, Chun BH, et al. Effect of the applied power of atmospheric pressure plasmaon the adhesion of composite resin to dental ceramic. J. Adhes Dent. 2012;14:461–469.
- Chen M, Zhang Y, Driver MS, et al. Surface modification of several dental substrates bynon-thermal, atmospheric plasma brush. Dent Mater. 2013;29(8):871–880.
- Chu PK, Chen JY, Wang LP, et al. Plasma-surface modification of biomaterials. Mat Sci Eng. 2002;36(5–6):143–206.
- Aladağ A, Elter B, Çömlekoğlu E, et al. Effect of different cleaning regimens on the adhesion of resin to saliva‐contaminated ceramics. J Prosthodont. 2015;24(2):136–145.
- Ozer F, Naden A, Turp V, et al. Effect of thickness and surface modifications on flexural strength of monolithic zirconia. J Prosthet Dent. 2018;119(6):987–993.
- Angkasith P, Burgess JO, Bottino MC, et al. Cleaning methods for zirconia following salivary contamination. J Prosthodont. 2016;25(5):375–379.
- Piest C, Wille S, Strunskus T, et al. Efficacy of plasma treatment for decontaminating zirconia. J Adhes Dent. 2018;20(4):289–297.
- Spencer HR, Ike V, Brennan PA. Review: the use of sodium hypochlorite in endodontics-potential complications and their management. Br Dent J. 2007;202(9):555–559.
- Kim DH, Son JS, Jeong SH, et al. Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding. J Adv Prosthodont. 2015;7(2):85–92.
- Nishigawa G, Maruo Y, Irie M, et al. Ultrasonic cleaning of silica-coated zirconia influences bond strength between zirconia and resin luting material. Dent Mater J. 2008;27(6):842–848.
- Phark JH, Duarte S, Jr, Kahn H, et al. Influence of contamination and cleaning on bond strength to modified zirconia. Dent Mater. 2009;25(12):1541–1550.
- Yoshida K. Influence of cleaning methods on resin bonding to saliva-contaminated zirconia. J Esthet Restor Dent. 2018;30(3):259–264.
- Yang B, Wolfart S, Scharnberg M, et al. Influence of contamination on zirconia ceramic bonding. J Dent Res. 2007;86(8):749–753.
- Ishii R, Tsujimoto A, Takamizawa T, et al. Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding. Dent Mater J. 2015;34(1):91–97.
- Tsujımoto A, Barkmeier WW, Takamizawa T, et al. Interfacial characteristics and bond durability of universal adhesive to various substrates. Oper Dent. 2017;42(2):E59–e70.
- Emamieh S, Elahi M, Ghasemi A. Effect of two universal adhesives on microshear bond strength of resin cement to zirconia. Dent Med Probl. 2019;56(3):224–245.