References
- Heidarzadeh A, Taghizadeh B, Mohammadzadeh A. In-situ formation of Zn oxide particles in CuZn matrix during friction stir processing. J Adhes Sci Technol. 2020;1-8.doi:https://doi.org/10.1080/01694243.2020.1826829
- Kumar Rajak D, Pagar DD, Menezes PL, et al. Friction-based welding processes: friction welding and friction stir welding. J Adhes Sci Technol. 2020;34:2613–2637.
- Guo C, Shen Y, Hou W, et al. Effect of groove depth and plunge depth on microstructure and mechanical properties of friction stir butt welded AA6061-T6. J Adhes Sci Technol. 2018;32:2709–2726.
- Li C, Zhang D, Gao X, et al. Numerical simulation and experimental research on friction stir welding of 2024-T3 aeronautical aluminum alloy. J Adhes Sci Technol. 2021.
- Jiang H, Liu C, Yang Z, et al. Effect of friction stir processing on the microstructure, damping capacity, and mechanical properties of Al-Si alloy. J Materi Eng Perform. 2019;28:1173–1179.
- Richmire S, Haghshenas M. Friction stir welding of a hypoeutectic Al–Si alloy: microstructural, mechanical, and cyclic response. Int J Adv Manuf Technol. 2019;101:3001–3019.
- Tutunchilar S, Givi MB, Haghpanahi M, et al. Eutectic Al–Si piston alloy surface transformed to modified hypereutectic alloy via FSP. Mater Sci Eng A. 2012;534:557–567.
- Ma ZY, Mishra RS, Mahoney MW. Superplasticity in cast A356 induced via friction stir processing. Scr Mater. 2004;50:931–935.
- Karthikeyan L, Senthilkumar VS, Balasubramanian V, et al. Mechanical property and microstructural changes during friction stir processing of cast aluminum 2285 alloy. Mater Des. 2009;30:2237–2242.
- Santella ML, Engstrom T, Storjohann D, et al. Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A356. Scr Mater. 2005;53:201–206.
- Amini A, Asadi P, Zolghadr P. Friction stir welding applications in industry. In: Givi MKB, Asadi P, editors. Advances in friction stir welding and processing. Cambridge (UK): Woodhead Publishing; 2014.
- Richmire S, Sharifi P, Haghshenas M. On microstructure, hardness, and fatigue properties of friction stir-welded AM60 cast magnesium alloy. Int J Adv Manuf Technol. 2018;98:2157–2172.
- Kim Y, Fujii H, Tsumura T, et al. Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloy. Mater Lett. 2006;60:3830–3837.
- Jata K, Semiatin S. Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Air force research lab wright-patterson afb oh materials and manufacturing directorate; 2000 Sep 1. https://apps.dtic.mil/sti/citations/ADA414407
- McNelley TR, Swaminathan S, Su JQ. Recrystallization mechanisms during friction stir welding/processing of aluminum alloys. Scr Mater. 2008;58:349–354.
- Zamani M. Al-Si Cast Alloys-Microstructure and Mechanical Properties at Ambient and Elevated Temperatures. Jönköping University, School of Engineering; 2017.
- Kaufman JG, Rooy EL. Aluminum alloy castings: properties, processes, and applications. Materials Park (OH): ASM International; 2004.
- Ma Z, Sharma S, Mishra RJM. Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processing. Metall Mater Trans A. 2006;37:3323–3336.
- Basavakumar KG, Mukunda PG, Chakraborty M. Impact toughness in Al–12Si and Al–12Si–3Cu cast alloys—part 1: effect of process variables and microstructure. Int J Impact Eng. 2008;35:199–205.
- Pio LY. Die cast A356 aluminium alloy. J Appl Sci. 2011;11:2048–2052.
- Birol Y. Impact of grain size on mechanical properties of AlSi7Mg0. 3 alloy. Mater Sci Eng A. 2013;559:394–400.
- Purcek G, Saray O, Karaman I, et al. Effect of severe plastic deformation on tensile properties and impact toughness of two-phase Zn–40Al alloy. Mater Sci Eng A. 2008;490:403–410.
- Azushima A, Kopp R, Korhonen A, et al. Severe plastic deformation (SPD) processes for metals. CIRP Ann. 2008;57:716–735.
- Achard J. Contact and rubbing of flat surface. J Appl Phys. 1953;24:981–988.
- Mahdavi S, Asghari-Alamdari A, Zolola-Meibodi M. Effect of alumina particle size on characteristics, corrosion, and tribological behavior of Co/Al2O3 composite coatings. Ceram Int. 2020;46:5351–5359.