Investigations of low-velocity impact behaviour of single-lap joints having dissimilar hybrid composite adherends through cohesive zone model approach

References

• Adams RD, Comyn J, Wake WC. Structural adhesive joints in engineering. London: Elsevier; 1984.
   Google Scholar
• Debora CM, Nunes LCS. Experimental analysis of bonded single-lap joint with flexible adhesive. Appl Adhes Sci. 2014;2(1):1–8.
   Google Scholar
• Campilho RDSG, Pinto AMG, Banea MD, et al. Optimization study of hybrid spot-welded/bonded single-lap joints. Int J Adhes Adhes. 2012;37:86–95.
   Web of Science ®Google Scholar
• Marques GP, Campilho RDGS, Da Silva FJG, et al. Adhesive selection for hybrid spot-welded/bonded single-lap joints: experimentation and numerical analysis. Compos Part B. 2016;84:248–257.
   Web of Science ®Google Scholar
• Tsai MY, Morton J. The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap. Compos Struct. 1995;32(1–4):123–131.
   Web of Science ®Google Scholar
• Banea MD, Da Silva LFM, Carbas R, et al. Effect of material on the mechanical behaviour of adhesive joints for the automotive industry. J Adhes Sci Technol. 2017;31(6):663–676.
   Web of Science ®Google Scholar
• de Moura MFSF, Daniaud R, Magalhães AG. Simulation of mechanical behaviour of composite bonded joints containing strip defects. Int J Adhes Adhes. 2006;26(6):464–473.
   Web of Science ®Google Scholar
• Kadıoglu F. Mechanical behaviour of adhesively single-lap joint under buckling conditions. Chin J Aeronaut. 2020;1:1–10.
   Google Scholar
• Liao L, Sawa T, Huang C. Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings. Int J Adhes Adhes. 2013;44:91–98.
   Web of Science ®Google Scholar
• Avendaño R, Carbas RJC, Chaves FJP, et al. Impact loading of single-lap joints of dissimilar lightweight adherends bonded with a crash-resistant epoxy adhesive. J Eng Mater Technol. 2016;138:1–10.
   Web of Science ®Google Scholar
• Machado JJM, Nunes PDP, Marques EAS, et al. Adhesive joints using aluminium and CFRP substrates tested at low and high temperatures under quasi-static and impact conditions for the automotive industry. Compos Part B. 2019;158:102–116.
   Web of Science ®Google Scholar
• Machado JJM, Marques EAS, Da Silva LFM. Mechanical behaviour of adhesively bonded composite single-lap joints under quasi-static and impact conditions with variation of temperature and overlap. J Compos Mater. 2018;1:1–15.
   Google Scholar
• Atahan MG, Apalak MK. Low-speed bending impact behavior of adhesively bonded single-lap joints. J Adhes Sci Technol. 2017;31(14):1545–1575.
   Web of Science ®Google Scholar
• Gaiotti M, Zamarin A, Josefson BL, et al. A numerical sensitivity analysis on the cohesive parameters of a carbon-steel single-lap joint. Ocean Eng. 2020;198:1–9.
   Web of Science ®Google Scholar
• Machado JJM, Gamarra PMR, Marques EAS, et al. Numerical study of the behaviour of composite mixed adhesive joints under impact strength for the automotive industry. Compos Struct. 2018;185:373–380.
   Web of Science ®Google Scholar
• Ghasemnejad H, Argentiero Y, Tez TA, et al. Impact damage response of natural stitched single-lap-joint in composite structures. Mater Des. 2013;51:552–560.
   Web of Science ®Google Scholar
• Johnson AF, Pickett AK, Rozycki P. Computational methods for predicting impact damage in composite structures. Compos Sci Technol. 2001;61(15):2183–2192.
   Web of Science ®Google Scholar
• Atahan MG, Apalak MK. Low velocity oblique impact behavior of adhesively bonded single-lap joints. J Adhes Sci Technol. 2019;1:1–38.
   Google Scholar
• Morgado MA, Carbas RJC, Marques EAS, et al. Reinforcement of CFRP single-lap joints using metal laminates. Compos Struct. 2019;230:111492.
   Web of Science ®Google Scholar
• Lewis Karen S, Kelly Robert G, Piascik Robert S. Determination of the corrosive conditions present within aircraft lap-splice joints; NASA Technical Reports Server (NTRS); 1999. Available from: https://www.science.gov/topicpages/a/aircraft+lap+joints.
   Google Scholar
• Quilter A. Composites in aerospace applications; Airframe Technology; 2004. Available from: https://www.aviationpros.com/engines-components/aircraft-airframe-accessories/article/10386441/composites-in-aerospace-applications#:∼:text=Better%20known%20man%2Dmade%20composite,which%20is%20tough%20but%20neither.
   Google Scholar
• Araldite 2011 adhesive. Hunstman advanced materials; 2015. Available from: https://us.aralditeadhesives.com/us/adhesives/request-a-tds/163-araldite-2011-us-e/file.html.
   Google Scholar
• Araldite Av138m with harderner HV 998. Hunstman advanced materials; 2004. Available from: http://adhesive.leaderseal.com/download/TDSAV138M-HV998.pdf.
   Google Scholar
• Da Silva LFM, Carbas RJC, Critchlow GW, et al. Effect of material, geometry, surface treatment and environment on the shear strength of single-lap joints. Int J Adhes Adhes. 2009;29(6):621–632.
   Web of Science ®Google Scholar
• Campilho RDSG, Banea MD, Neto JABP, et al. Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer. Int J Adhes Adhes. 2013;44:48–56.
   Web of Science ®Google Scholar
• Azevedo JCS, Campilho RDSG, da Silva FJG, et al. Cohesive law estimation of adhesive joints in mode II condition. Theor Appl Fract Mech. 2015;80:143–154.
   Web of Science ®Google Scholar
• Erbayrak E, Yuncuoglu EU, Kahraman Y, et al. An experimental and numerical determination on low-velocity iImpact response of hybrid composite laminate. Iran J Sci Technol Trans Mech Eng. 2021;45(3):665–681.
   Web of Science ®Google Scholar
• ASTM D3165 – 07. Standard test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies; 2014. Available from: https://www.astm.org/Standards/D3165.htm.
   Google Scholar
• Maamar DB, Ramdane Z. Characterization of the mechanical behaviour of carbon fiber composite laminate under low velocity impact. Period Polytech Mech Eng. 2016;60(3):142–150.
   Google Scholar
• Tabiei A, Zhang W. A robust cohesive zone model for cycling loading. 14th International Ls-Dyna users conference; 2016 June 12–14; Detroit.
   Google Scholar
• Tvergaard V, Hutchinson JW. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J Mech Phys Solid. 1992;40(6):1377–1397.
   Web of Science ®Google Scholar
• Bouvet C, Rivallant S, Barrau JJ. Low velocity impact modeling in composite laminates capturing permanent indentation. Compos Sci Technol. 2012;72(16):1977–1988.
   Web of Science ®Google Scholar
• Qu P, Sun X, Guan X, et al. Effect of interlaminar toughness on the low-velocity impact damage in composite laminates. Polym Compos. 2014;1:1–7.
   Google Scholar
• Ls-Dyna keyword user manuel; Livermore Software Technology Corporation; 2007. Available from: http://lstc.com/pdf/ls-dyna_971_manual_k.pdf.
   Google Scholar
• Choi HY, Chang FK. A model for predicting damage in graphite/epoxy laminated composites resulting from low-velocity point impact. J Compos Mater. 1992;26:2135–2169.
   Web of Science ®Google Scholar
• Matta S, Kolanu NR, Chinthapenta V, et al. Progressive damage analysis of adhesively bonded patch repaired carbon fibre-reinforced polymer specimen under compression involving cohesive zone model. Int J Damage Mech. 2019; 28(10):1457–1489.
   Web of Science ®Google Scholar
• Carvalho UTF, Campilho RDSG. Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints. Int J Adhes Adhes. 2017;77:41–50.
   Web of Science ®Google Scholar
• Hartlen DC, Montesano J, Cronin DS. Cohesive zone modeling of adhesively bonded Interfaces: the effectof adherend geometry, element selection, and loading condition. 16 th International Ls-Dyna users conference;2020 June 10-11 virtual event
   Google Scholar
• CEAST 9300 Series Droptower Impact Systems. Instron test device; 2010. Available from: https://www.instron.us/-/media/literature-library/products/2010/02/ceast-9300-series.pdf.
   Google Scholar
• Grilli N, Tarleton E, Cocks ACF. Coupling a discrete twin model with cohesive elements to understand twin-induced fracture. Int J Fract. 2021;227(2):173–192.
   Web of Science ®Google Scholar
• Morais W. A D, d'Almeida JRM, Godefroid LB. Effect of the fiber reinforcement on the low energy ımpact behavior of fabric reinforced resin matrix composite materials. J Braz Soc Mech Sci Eng. 2003;25(4):325–328.
   Google Scholar
• Grasso M, Xu Y, Ramji A, et al. Low-velocity impact behaviour of woven laminate plates with fire retardant resin. Compos Part B. 2019;171:1–8.
   Web of Science ®Google Scholar
• Newbold P, Carlson WL, Thorne BM. Statistics for business and economics. New Jersey: Prentice Hall; 1994.
   Google Scholar
• Simon F, Valentin G. Cohesive failure characterisation of wood adhesive joints loaded in shear. Eur Struct Integrity Soc. 2003;32:305–316.
   Google Scholar
• Wei K, Chen Y, Li M, et al. Strength and failure mechanism of composite-steel adhesive bond single-lap joints. Adv Mater Sci Eng. 2018;2018:1–10.
   Web of Science ®Google Scholar