Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

References

• Cortellini D, Canale A. Bonding lithium disilicate ceramic to feather-edge tooth preparations: a minimally invasive treatment concept. J Adhes Dent. 2012;14(1):7–10.
   PubMed Web of Science ®Google Scholar
• Kameyama A, Bonroy K, Elsen C, et al. Luting of CAD/CAM ceramic inlays: direct composite versus dual-cure luting cement. BME. 2015;25(3):279–288.
   Google Scholar
• Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 1999;20(1):1–25.
   PubMed Web of Science ®Google Scholar
• Otto T, Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of cerec CAD/CAM inlays and onlays. Int J Prosthodont. 2002;15:122–128.
   PubMed Web of Science ®Google Scholar
• Hayashi M, Tsuchitani Y, Kawamura Y, et al. Eight-year clinical evaluation of fired ceramic inlays. Oper Dent. 2000;25(6):473–481.
   PubMed Web of Science ®Google Scholar
• Schulz P, Johansson A, Arvidson K. A retrospective study of mirage ceramic inlays over up to 9 years. Int J Prosthodont. 2003;16(5):510–514.
   PubMed Web of Science ®Google Scholar
• Lopes CDCA, Rodrigues RB, Júnior PCS, et al. Degree of conversion and mechanical properties of resin cements cured through different all-ceramic systems. Braz Dent J. 2015;26(5):484–489.
   PubMedGoogle Scholar
• Mota CS, Demarco FF, Camacho GB, et al. Microleakage in ceramic inlays luted with different resin cements. J Adhes Dent. 2003;5:63–70.
   PubMed Web of Science ®Google Scholar
• Liu X, Jiang X, Xu T, et al. Investigating the shear bond strength of five resin-based luting agents to zirconia ceramics. J Oral Sci. 2020;62(1):84–88.
   PubMed Web of Science ®Google Scholar
• Novais VR, Raposo LHA, Miranda RRD, et al. Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes. J Appl Oral Sci. 2017;25(1):61–68.
   PubMed Web of Science ®Google Scholar
• Tagami A, Takahashi R, Nikaido T, et al. The effect of curing conditions on the dentin bond strength of two dual-cure resin cements. J Prosthodont Res. 2017;61(4):412–418.
   PubMed Web of Science ®Google Scholar
• Lafuente JD, Chaves A, Carmiol R. Bond strength of dual-cured resin cements to human teeth. J Esthet Dent. 2000;12(2):105–110.
   PubMedGoogle Scholar
• Fabianelli A, Goracci C, Bertelli E, et al. A clinical trial of Empress II porcelain inlays luted to vital teeth with a dual-curing adhesive system and a self-curing resin cement. J Adhes Dent. 2006;8:427–431.
   PubMed Web of Science ®Google Scholar
• Goulart M, Veleda BB, Damin D, et al. Preheated resin composite used as a luting agent for indirect restorations: effects on bond strength and resin-dentin interfaces. Int J Esthet Dent. 2018;13(1):86–97.
   PubMed Web of Science ®Google Scholar
• Coelho NF, Barbon FJ, Machado RG, et al. Response of composite resins to preheating and the resulting strengthening of luted feldspar ceramic. Dent Mater. 2019;35(10):1430–1438.
   PubMed Web of Science ®Google Scholar
• Simon JF, Darnell LA. Considerations for proper selection of dental cements. Compend Contin Educ Dent. 2012;33:28–30.
   PubMedGoogle Scholar
• Sampaio CS, Barbosa JM, Cáceres E, et al. Volumetric shrinkage and film thickness of cementation materials for veneers: an in vitro 3D microcomputed tomography analysis. J Prosthet Dent. 2017;117(6):784–791.
   PubMed Web of Science ®Google Scholar
• Almeida JR, Schmitt GU, Kaizer MR, et al. Resin-based luting agents and color stability of bonded ceramic veneers. J Prosthet Dent. 2015;114(2):272–277.
   PubMed Web of Science ®Google Scholar
• Schneider LFJ, Ribeiro RB, Liberato WF, et al. Curing potential and color stability of different resin-based luting materials. Dent Mater. 2020;36(10):e309–e315.
   PubMed Web of Science ®Google Scholar
• Tauböck TT, Tarle Z, Marovic D, Attin T. Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion. J Dent. 2015;43(11):1358–1364.
   PubMed Web of Science ®Google Scholar
• Lucey S, Lynch CD, Ray NJ, et al. Effect of pre‐heating on the viscosity and microhardness of a resin composite. J Oral Rehabil. 2010;37(4):278–282.
   PubMed Web of Science ®Google Scholar
• Fróes-Salgado NR, Silva LM, Kawano Y, et al. Composite pre-heating: effects on marginal adaptation, degree of conversion and mechanical properties. Dent Mater. 2010;26(9):908–914.
   PubMed Web of Science ®Google Scholar
• Ayub KV, Santos GC, Rizkalla AS, et al. Effect of preheating on microhardness and viscosity of 4 resin composites. J Can Dent Assoc. 2014; 80:e12.
   PubMedGoogle Scholar
• Demirbuga S, Ucar FI, Cayabatmaz M, et al. Microshear bond strength of preheated silorane‐and methacrylate‐based resin composites to dentin. J Scannig Microsc. 2016;38(1):63–69.
   PubMed Web of Science ®Google Scholar
• Rickman LJ, Padipatvuthikul P, Chee B. Clinical applications of preheated hybrid resin composite. Br Dent J. 2011;211(2):63–67.
   PubMed Web of Science ®Google Scholar
• Beun S, Glorieux T, Devaux J, et al. Characterization of nanofilled compared to universal and microfilled composites. Dent Mater. 2007;23(1):51–59.
   PubMed Web of Science ®Google Scholar
• Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21(1):68–74.
   PubMed Web of Science ®Google Scholar
• Öztürk-Bozkurt F, Toz-Akalin T, Gözetici B, et al. Load-bearing capacity and failure types of premolars restored with sonic activated bulk-fill-, nano-hybrid and silorane-based resin restorative materials. J Adhes Sci Technol. 2016;30(17):1880–1890.
   Web of Science ®Google Scholar
• Casagrande L, Dalpian DM, Ardenghi TM, et al. Randomized clinical trial of adhesive restorations in primary molars. 18-month results. Am J Dent. 2013;26:351–355.
   PubMed Web of Science ®Google Scholar
• Feitosa SA, Corazza PH, Cesar PF, et al. Pressable feldspathic inlays in premolars: effect of cementation strategy and mechanical cycling on the adhesive bond between dentin and restoration. J Adhes Dent. 2014;16(2):147–154.
   PubMed Web of Science ®Google Scholar
• Bottino MA, Campos F, Ramos NC, et al. Inlays made from a hybrid material: adaptation and bond strengths. Operat Dent. 2015;40(3):E83–E91.
   PubMed Web of Science ®Google Scholar
• Pashley DH, Carvalho RM, Sano H, et al. The microtensile bond test: a review. J Adhes Dent. 1999;1(4):299–309.
   PubMedGoogle Scholar
• Ende AV, Munck J, Mine A, et al. Does a low-shrinking composite induce less stress at the adhesive interface? Dent Mater. 2010;26(3):215–222.
   PubMed Web of Science ®Google Scholar
• Sampaio RKD, Wang L, Carvalho RVD, et al. Six-month evaluation of a resin/dentin interface created by methacrylate and silorane-based materials. J Appl Oral Sci. 2013;21(1):80–84.
   PubMed Web of Science ®Google Scholar
• Isaac SZ, Bergamin ACP, Turssi CP, et al. Evaluation of bond strength of silorane and methacrylate based restorative systems to dentin using different cavity models. J Appl Oral Sci. 2013;21(5):452–459.
   PubMed Web of Science ®Google Scholar
• Silva GRD, Araújo IS, Pereira RD, et al. Microtensile bond strength of methacrylate and silorane resins to enamel and dentin. Braz Dent J. 2014;25(4):327–331.
   PubMedGoogle Scholar
• Coffone BT, Chaves FO, Alonso RCB, et al. Compatibility of silorane composite repaired with methacrylate-based restorative systems. J Adhes Sci Technol. 2014;28(16):1579–1591.
   Web of Science ®Google Scholar
• Mine A, Munck J, Ende AV, et al. TEM characterization of a silorane composite bonded to enamel/dentin. Dent Mater. 2010;26(6):524–532.
   PubMed Web of Science ®Google Scholar
• Saavedra G, Ariki EK, Federico CD, et al. Effect of acid neutralization and mechanical cycling on the microtensile bond strength of glass-ceramic inlays. Oper Dent. 2009;34(2):211–216.
   PubMed Web of Science ®Google Scholar
• Vanlioglu BA, Evren B, Yildiz C, et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. Int J Prosthodont. 2012;25(3):262–264.
   PubMed Web of Science ®Google Scholar
• Dickson PL, Vandewalle KS, Lien W, et al. Effects of preheating on the properties of silorane-and methacrylate-based composites. Gen Dent. 2014;62:e12–e17.
   PubMedGoogle Scholar