Evaluation of the adhesion property and moisture stability of rubber modified asphalt mixture incorporating waste steel slag

References

• Chen ZW, Wu SP, Wen J, et al. Utilization of gneiss coarse aggregate and steel slag fine aggregate in asphalt mixture. Constr Build Mater. 2015;93:911–918.
   Web of Science ®Google Scholar
• Guo Y, Wu H, Shen A, et al. Study of the long-term water stability of asphalt mixtures containing steel slag aggregate. J Adhes Sci Technol. 2020;34(8):877–902.
   Web of Science ®Google Scholar
• Yu HY, Chen YL, Wu Q, et al. Decision support for selecting optimal method of recycling waste tire rubber into wax -based warm mix asphalt based on fuzzy comprehensive evaluation. J Clean Prod. 2020;265:121781.
   Web of Science ®Google Scholar
• Shen AQ, Zhai CW, Guo YC, et al. Mechanism of adhesion property between steel slag aggregate and rubber asphalt. J Adhes Sci Technol. 2018;32(24):2727–2740.
   Web of Science ®Google Scholar
• Chen JS, Wei SH. Engineering properties and performance of asphalt mixtures incorporating steel slag. Constr Build Mater. 2016;128:148–153.
   Web of Science ®Google Scholar
• Moreno-Navarro F, Sol M, Rubio-Gamez MC, et al. Reuse of thermal power plant slag in hot bituminous mixes. Constr Build Mater. 2013;49:144–150.
   Web of Science ®Google Scholar
• Dhanalakshmi J, Vijayakumar CT. Thermal studies on dry bonding adhesive system for potential rubber article applications. J Adhes Sci Technol. 2020;34(3):233–245.
   Web of Science ®Google Scholar
• Moreno-Navarro F, Rubio-Gámez MC, Jiménez DEL Barco-Carrión A. Tire crumb rubber effect on hot bituminous mixtures fatigue-cracking behaviour. J Civ Eng Manag. 2015;22(1):65–72.
   Web of Science ®Google Scholar
• Wan J, Wu S, Xiao Y, et al. Study on the effective composition of steel slag for asphalt mixture induction heating purpose. Constr Build Mater. 2018;178:542–550.
   Web of Science ®Google Scholar
• Cui PD, Wu SP, Xiao Y, et al. Quantitative evaluation of active based adhesion in aggregate-asphalt by digital image analysis. J Adhes Sci Technol. 2019;33(14):1544–1557.
   Web of Science ®Google Scholar
• Zongwu C, Yuyong J, Shaopeng W, et al. Moisture-induced damage resistance of asphalt mixture entirely composed of gneiss and steel slag. Constr Build Mater. 2018;177:332–341.
   Web of Science ®Google Scholar
• Wu P, Wang JX, Hu SG, et al. Preparation and performance of slag-based binders for the cementation of fine tailings. J Adhes Sci Technol. 2018;32(9):976–996.
   Web of Science ®Google Scholar
• Kavussi A, Qazizadeh MJ. Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging. Constr Build Mater. 2014;72:158–166.
   Web of Science ®Google Scholar
• Oluwasola EA, Hainin MR, Aziz MMA. Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings. J Clean Prod. 2016;122:315–325.
   Web of Science ®Google Scholar
• Hesami S, Ameri M, Goli H, et al. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates. Int J Pavement Eng. 2015;16(8):745–759.
   Web of Science ®Google Scholar
• Chen ZW, Wu SP, Xiao Y, et al. Effect of hydration and silicone resin on basic oxygen furnace slag and its asphalt mixture. J Clean Prod. 2016;112:392–400.
   Web of Science ®Google Scholar
• Chen ZW, Gong ZL, Jiao YY, et al. Moisture stability improvement of asphalt mixture considering the surface characteristics of steel slag coarse aggregate. Constr Build Mater. 2020;251:118987.
   Web of Science ®Google Scholar
• Moura BLRd, Teixeira JESL, Simão RA, et al. Adhesion between steel slag aggregates and bituminous binder based on surface characteristics and mixture moisture resistance. Constr Build Mater. 2020;264:120685.
   Web of Science ®Google Scholar
• Amelian S, Manian M, Abtahi SM, et al. Moisture sensitivity and mechanical performance assessment of warm mix asphalt containing by-product steel slag. J Clean Prod. 2018;176:329–337.
   Web of Science ®Google Scholar
• Lyu Z, Shen A, Li D, et al. Effect of dry–wet and freeze–thaw repeated cycles on water resistance of steel slag asphalt mixture, IJST-T. Iran J Sci Technol Trans Civ Eng. 2021;45(1):291–301.
   Web of Science ®Google Scholar
• Nian T, Li P, Mao Y, et al. Connections between chemical composition and rheology of aged base asphalt binders during repeated freeze–thaw cycles. Constr Build Mater. 2018;159:338–350.
   Web of Science ®Google Scholar
• Wu H, Li P, Nian T, et al. Evaluation of asphalt and asphalt mixtures’ water stability method under multiple freeze–thaw cycles. Constr Build Mater. 2019;228:117089.
   Web of Science ®Google Scholar
• Chen ZW, Xie J, Xiao Y, et al. Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder. Constr Build Mater. 2014;64:60–66.
   Web of Science ®Google Scholar
• Liu W, Li H, Zhu H, et al. The interfacial adhesion performance and mechanism of a modified asphalt-steel slag aggregate. Materials. 2020;13(5):1180.
   PubMed Web of Science ®Google Scholar
• Li B, Li X, Kundwa MJ, et al. Evaluation of the adhesion characteristics of material composition for polyphosphoric acid and SBS modified bitumen based on surface free energy theory. Constr Build Mater. 2021;266:121022.
   Web of Science ®Google Scholar
• Liu X, Li B, Jia M, et al. Effect of short-term aging on interface-cracking behaviors of warm mix asphalt under dry and wet conditions. Constr Build Mater. 2020;261:119885.
   Web of Science ®Google Scholar
• Liu S, Zhou S, Peng A. Analysis of moisture susceptibility of foamed warm mix asphalt based on cohesion, adhesion, bond strength, and morphology. J Clean Prod. 2020;277:123334.
   Web of Science ®Google Scholar
• Zhou L, Huang W, Zhang Y, et al. Evaluation of the adhesion and healing properties of modified asphalt binders. Constr Build Mater. 2020;251:119026.
   Web of Science ®Google Scholar
• Júnior JLOL, Babadopulos LFAL, Soares JB. Moisture-induced damage resistance, stiffness and fatigue life of asphalt mixtures with different aggregate-binder adhesion properties. Constr Build Mater. 2019;216:166–175.
   Web of Science ®Google Scholar
• Chandran MS, Padmanabhan K, Raj DKD, et al. A comparative investigation of interfacial adhesion behaviour of polyamide based self-reinforced polymer composites by single fibre and multiple fibre pull-out tests. J Adhes Sci Technol. 2020;34(5):511–530.
   Web of Science ®Google Scholar
• JTG F40-2004. Technical specifications for construction highway asphalt pavements. Beijing (China): Ministry of Transport of the People’s Republic of China; 2004.
   Google Scholar
• JTG E20-2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. Beijing (China): Ministry of Transport of the People’s Republic of China; 2011.
   Google Scholar
• JTG E42-2005. Test methods of aggregate for highway engineering. Beijing (China): Ministry of Transport of the People’s Republic of China; 2005.
   Google Scholar
• Fowkes, Frederick M. Attractive forces at interfaces. Ind Eng Chem. 1964; 56(12):40–52.
   Google Scholar
• Owens DK, and Wendt RC. Estimation of the surface free energy of polymers. J Appl Polym Sci. 1969;13(8):1741–1747.
   Google Scholar
• Wang W, Shen A, Yang X, et al. Surface free energy method for evaluating the effects of anti-stripping agents on the moisture damage to asphalt mixtures. J Adhes Sci Technol. 2020;34(18):1947–1970.
   Web of Science ®Google Scholar
• Yang Q, Hong B, Lin J, et al. Study on the reinforcement effect and the underlying mechanisms of a bitumen reinforced with recycled glass fiber chips. J Clean Prod. 2020;251:119768.
   Web of Science ®Google Scholar
• Alvarez AE, Ovalles E, Martin AE. Comparison of asphalt rubber-aggregate and polymer modified asphalt–aggregate systems in terms of surface free energy and energy indices. Constr Build Mater. 2012;35:385–392.
   Web of Science ®Google Scholar
• Bhasin A, Little DN, Vasconcelos KL, et al. Surface free energy to identify moisture sensitivity of materials for asphalt mixes. Transport Res Rec. 2007;2001(1):37–45.
   Web of Science ®Google Scholar
• Tanzadeh R, Shafabakhsh G. Surface free energy and adhesion energy evaluation of modified bitumen with recycled carbon black (micro-nano) from gases and petrochemical waste. Constr Build Mater. 2020;245:118361.
   Web of Science ®Google Scholar