An experimental study on the mechanical performance of BFRP-Al adhesive joints subjected to salt solutions at elevated temperature

References

• Teixeira FS, Banea MD, Budhe S, et al. Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests. Compos Struct. 2017;164:68–75.
   Web of Science ®Google Scholar
• Dittmar H, Plaggenborg H. Lightweight vehicle underbody design. Reinf Plast. 2019;63(1):29–32.
   Google Scholar
• Wang S, Wang S, Li G, et al. Dynamic response and fracture analysis of basalt fiber reinforced plastics and aluminum alloys adhesive joints. Compos Struct. 2021;268(3):114013.
   Web of Science ®Google Scholar
• Scarselli G, Corcione C, Nicassio F, et al. Adhesive joints with improved mechanical properties for aerospace applications. Int J Adhes Adhes. 2017;75:174–180.
   Web of Science ®Google Scholar
• Zamani P, Moghadam DG, Shariati M, et al. Investigating on the influence of multi‐walled carbon nanotube and graphene nanoplatelet additives on residual strength of bonded joints subjected to partial fatigue loading. J Appl Polymer Sci. 2022;139(18):52069.
   Web of Science ®Google Scholar
• Na JX, Fan YS, Tan W, et al. Mechanical behavior of polyurethane adhesive bonded joints as a function of temperature and humidity. J Adhes Sci Technol. 2018;32(5):457–472.
   Web of Science ®Google Scholar
• Galvez P, Armentia S, Abenojar J, et al. Effect of moisture and temperature on thermal and mechanical properties of structural polyurethane adhesive joints. Compos Struct. 2020;247:112443.
   Web of Science ®Google Scholar
• Costa M, Viana G, Da Silva LF, et al. Environmental effect on the fatigue degradation of adhesive joints: a review. J Adhesion. 2017;93(1–2):127–146.
   Web of Science ®Google Scholar
• Jadhav N, Gaikwad V, Nair K, et al. Glass transition temperature: basics and application in pharmaceutical sector. Asian J Pharm. 2009;3(2):82–89.
   Google Scholar
• Ke L, Li C, He J, et al. Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints. Compos Struct. 2020;235:111789.
   Web of Science ®Google Scholar
• Qin GF, Na J, Mu W, et al. Effect of continuous high temperature exposure on the adhesive strength of epoxy adhesive, CFRP and adhesively bonded CFRP-aluminum alloy joints. Compos Part B-Eng. 2018;154:43–45.
   Web of Science ®Google Scholar
• Hao ZA, Jpt A, Df A, et al. The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures. Eng Struct. 2019;183:1121–1133.
   Web of Science ®Google Scholar
• Akderya T, Kemiklioğlu U, Sayman O. Effects of thermal ageing and impact loading on tensile properties of adhesively bonded fibre/epoxy composite joints. Compos Part B-Eng. 2016;95:117–122.
   Web of Science ®Google Scholar
• Na J, Mu W, Qin G, et al. Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry. Int J Adhes Adhes. 2018;85:138–148.
   Web of Science ®Google Scholar
• Avendano R, Carbas RJC, Marques EAS, et al. Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Compos Struct. 2016;152:34–44.
   Web of Science ®Google Scholar
• Luan J, Na J, Tan W, et al. Comparative study on mechanical properties of aluminum alloy and BFRP single lap joints with hygrothermal aging. J Adhesion. 2021;97(10):918–935.
   Web of Science ®Google Scholar
• Jian L, Yi A, Yx B, et al. Effect of hygrothermal-mechanical exposure on the residual strength of adhesively bonded joints. Int J Adhes Adhes. 2020;100:102616.
   Web of Science ®Google Scholar
• Sousa JM, Correia JR, Gonilha J, et al. Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing. Compos Part B-Eng. 2019;158:475–488.
   Web of Science ®Google Scholar
• Heshmati M, Haghani R, Al-Emrani M. Durability of bonded FRP-to-steel joints: effects of moisture, de-icing salt solution, temperature and FRP type. Compos Part B-Eng. 2017;119:153–167.
   Web of Science ®Google Scholar
• Zhang J, Cheng X, Guo X, et al. Effect of environment conditions on adhesive properties and material selection in composite bonded joints. Int J Adhes Adhes. 2020;96:102302.
   Web of Science ®Google Scholar
• Pohlit DJ, Dillard DA, Jacob GC, et al. Evaluating the rate-dependent fracture toughness of an automotive adhesive. J Adhesion. 2008;84(2):143–163.
   Web of Science ®Google Scholar
• Zamani P, Jaamialahmadi A, Silva LFMD, et al. An investigation on fatigue life evaluation and crack initiation of Al-GFRP bonded lap joints under four-point bending. Compos Struct. 2019;229:111433.
   Web of Science ®Google Scholar
• Alia C, Arenas Jose M, Suarez JC, et al. Mechanical behavior of polyurethane adhesive joints used in laminated materials for marine structures. Ocean Eng. 2016;113:64–74.
   Web of Science ®Google Scholar
• Li S, Khan HA, Hihara LH, et al. Corrosion behavior of friction stir blind riveted Al/CFRP and Mg/CFRP joints exposed to a marine environment. Corros Sci. 2018;132:300–309.
   Web of Science ®Google Scholar
• Wang X, Zhao X, Wu Z. Fatigue degradation and life prediction of basalt fiber-reinforced polymer composites after saltwater corrosion. Mater Design. 2019;163:107529.
   Web of Science ®Google Scholar
• Li HL, Zhang KF, Fan XT, et al. Effect of seawater ageing with different temperatures and concentrations on static/dynamic mechanical properties of carbon fiber reinforced polymer composites. Compos Part B-Eng. 2019;173:106910.
   Web of Science ®Google Scholar
• Chen Y, Li M, Yang X, et al. Durability and mechanical behavior of CFRP/Al structural joints in accelerated cyclic corrosion environments. Int J Adhes Adhes. 2020;102:102695.
   Web of Science ®Google Scholar
• Xiao H, Edmund P, Bo A, et al. Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: a novel meso-scale approach. Compos Part B-Eng. 2020;182:107609.
   Web of Science ®Google Scholar
• NS EN 1465 Ed. 1. Adhesives – determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies. 1995.
   Google Scholar
• AENOR UNE-EN ISO 527-2 EN. Plastics – determination of tensile properties – Part 2: test conditions for moulding and extrusion plastics (ISO 527-2-2012); 2012.
   Google Scholar
• Loh WK, Crocombe AD, Wahab M, et al. Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive. Int J Adhes Adhes. 2005;25(1):1–12.
   Web of Science ®Google Scholar
• Viana G, Costa M, Banea MD, et al. A review on the temperature and moisture degradation of adhesive joints. PI Mech Eng L-J Mat. 2017;231(5):488–501.
   Web of Science ®Google Scholar
• Ameli A, Datla NV, Papini M, et al. Hygrothermal properties of highly toughened epoxy adhesives. J Adhesion. 2010;86(7):698–725.
   Web of Science ®Google Scholar
• Nachtane M, Tarfaoui M, Sassi S, et al. An investigation of hygrothermal aging effects on high strain rate behaviour of adhesively bonded composite joints. Compos Part B-Eng. 2019;172:111–120.
   Web of Science ®Google Scholar
• Zafar A, Bertocco F, Schjødt-Thomsen J, et al. Investigation of the long term effects of moisture on carbon fibre and epoxy matrix composites. Compos Sci Technol. 2012;72(6):656–666.
   Web of Science ®Google Scholar
• Li S, Guo S, Yao Y, et al. The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: a critical review. Constr Build Mater. 2021;282(3):122534.
   Web of Science ®Google Scholar
• Fan Y, Guo J, Wang X, et al. Comparative failure study of different bonded basalt fiber-reinforced polymer (BFRP)-AL joints in a humid and hot environment. Polymers-Basel. 2021;13(16):2593.
   PubMed Web of Science ®Google Scholar
• Mu W, Na J, Wang G, et al. Rapid prediction method of failure load for hygrothermally aged CFRP – aluminum alloy single lap joints. Compos Struct. 2020;252:112603.
   Web of Science ®Google Scholar
• Stazi F, Giampaoli M, Rossi M, et al. Environmental ageing on GFRP pultruded joints: comparison between different adhesives. Compos Struct. 2015;133:404–414.
   Web of Science ®Google Scholar
• Rieger J. The glass transition temperature Tg of polymers—comparison of the values from differential thermal analysis (DTA, DSC) and dynamic mechanical measurements (torsion pendulum). Polym Test. 2001;20(2):199–204.
   Web of Science ®Google Scholar
• Zhou J, Lucas JP. Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature. Polymer. 1999;40(20):5513–5522.
   Web of Science ®Google Scholar
• Tcharkhtchi A, Farzaneh S, Abdallah-Elhirtsi ST, et al. Thermal aging effect on mechanical properties of polyurethane. Int J Polym Anal Ch. 2014;19(7):571–584.  
   Web of Science ®Google Scholar
• Dhakal H, Zhang Z, Bennett N, et al. Effects of water immersion ageing on the mechanical properties of flax and jute fibre biocomposites evaluated by nanoindentation and flexural testing. J Compos Mater. 2014;48(11):1399–1406.
   Web of Science ®Google Scholar