Load-bearing capacity of polyamide 6 (PA6) composite to 7075-O aerospace Al-alloy single-lap joints: influence of various laser textured patterns on hot press bonding

References

• Sun G, Xia X, Liu X, et al. On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy. Thin-Walled Structures. 2021;164:107657.
   Web of Science ®Google Scholar
• Meyer SP, Herold MT, Habedank JB, et al. A study on the bond strength of plastic–metal direct bonds using friction press joining. Metals. 2021;11(4):660.
   Web of Science ®Google Scholar
• Dasilva S, Jimenez-Suarez A, Rodríguez E, et al. Quality assessment and structural health monitoring of CNT reinforced CFRP and Ti6Al4V multi-material joints. MatDesign. 2021;210:110118.
   Web of Science ®Google Scholar
• Dong H, Tang Z, Li P, et al. Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites. Mat Design. 2021;201:109495.
   Web of Science ®Google Scholar
• Bora MÖ, Çoban O, Akman E, et al. Comparison of novel surface treatments of Al 2024 alloy for al/cfrp adhesive bonded joints. Int J Adhes Adhes. 2020;103:102721.
   Web of Science ®Google Scholar
• Akman E, Bora MÖ, Çoban O, et al. Laser-induced groove optimization for Al/CFRP adhesive joint strength. Int J Adhes Adhes. 2021;107:102830.
   Web of Science ®Google Scholar
• Wan H, Min J, Lin J. Experimental and theoretical studies on laser treatment strategies for improving shear bonding strength of structural adhesive joints with cast aluminum. Compos Struct. 2022;279:114831.
   Web of Science ®Google Scholar
• Zinnecker V, Stokes-Griffin CM, Khudiakova A, et al. A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids. Composites Part A 2020;137:105953.
   Web of Science ®Google Scholar
• Liu P, Zhong Y, Pei Q-X, et al. Simultaneously enhancing the strength and toughness of short fiber reinforced thermoplastic composites by fiber cross-linking. Compos Sci Technol. 2022;217:109076.
   Web of Science ®Google Scholar
• Volk M, Wong J, Arreguin S, et al. Pultrusion of large thermoplastic composite profiles up to Ø 40 mm from glass-fibre/PET commingled yarns. Composites Part B. 2021;227:109339.
   Web of Science ®Google Scholar
• Zhong Y, Liu P, Pei Q, et al. Elastic properties of injection molded short glass fiber reinforced thermoplastic composites. Compos Struct. 2020;254:112850.
   Web of Science ®Google Scholar
• Mandolfino C, Lertora E, Gambaro C. Influence of cold plasma treatment parameters on the mechanical properties of polyamide homogeneous bonded joints. Surf Coat Technol. 2017;313:222–229.
   Web of Science ®Google Scholar
• Zhi Q, Li Y, Shu P, et al. Double-pulse ultrasonic welding of carbon-fiber-reinforced polyamide 66 composite. Polymers. 2022;14(4):714.
   PubMed Web of Science ®Google Scholar
• Hirchenhahn P, Al Sayyad A, Bardon J, et al. Probing the reaction mechanism between a laser welded polyamide thin film and titanium with XPS and ToF-SIMS. Talanta. 2022;247:123539.
   PubMed Web of Science ®Google Scholar
• Pastukhov LV, Kanters MJW, Engels TAP, et al. Influence of fiber orientation, temperature and relative humidity on the long-term performance of short glass fiber reinforced polyamide 6. J Appl Polym Sci. 2021;138(19):50382.
   Web of Science ®Google Scholar
• Al-Furjan MSH, Hajmohammad MH, Shen X, et al. Evaluation of tensile strength and elastic modulus of 7075-T6 aluminum alloy by adding SiC reinforcing particles using vortex casting method. J Alloys Compd. 2021;886:161261.
   Web of Science ®Google Scholar
• Tang B, Li H, Guo N, et al. Revealing ductile/quasi-cleavage fracture and DRX-affected grain size evolution of AA7075 alloy during hot stamping process. Int J Mech Sci. 2021;212:106843.
   Web of Science ®Google Scholar
• Liu Z, Li Y, Meehan PA. Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming. Int J Precis Eng Manuf. 2013;14:1891–1899.
   Web of Science ®Google Scholar
• Acar D, Karalı M, Cora ÖN, et al. Uniaxial and biaxial deformation characteristics of AA7075-O friction stir welded joints. Weld World. 2020;64:1553–1564.
   Web of Science ®Google Scholar
• Wan H, Min J, Lin J, et al. Effect of laser spot overlap ratio on surface characteristics and adhesive bonding strength of an Al alloy processed by nanosecond pulsed laser. J Manuf Processes. 2021;62:555–565.
   Web of Science ®Google Scholar
• Zhang C, Chen L, Zhang Y, et al. Effect of laser processing microstructure on the bonding strength and failure mode of 7075-T6 aluminum alloy adhesive joints. J Manuf Processes. 2021;66:302–312
   Web of Science ®Google Scholar
• Liu X, Zhu H, Xie Y, et al. Optimization of microstructural morphology via laser processing to enhance the bond strength of Al-CFRP. J Reinf Plast Compos. 2021;40(11-12):463–473.
   Web of Science ®Google Scholar
• Sang J, Hirahara H, Aisawa S, et al. Direct bonding of polypropylene to aluminum using molecular connection and the interface nanoscale properties. ACS Appl Polym Mater. 2019;1(9):2450–2459.
   Web of Science ®Google Scholar
• Xu R, Xie Y, Li R, et al. Direct bonding of polymer and metal with an ultrahigh strength: laser treatment and mechanical interlocking. Adv Eng Mater. 2021;23(5):2001288.
   Web of Science ®Google Scholar
• Genna S, Lambiase F, Ponticelli GS. Fuzzy decision-making in laser-assisted joining of polymer-metal hybrid structures. Int J Adv Manuf Technol. 2020;108:61–72.
   Web of Science ®Google Scholar
• Lambiase F, Genna S. Laser assisted joining of AA5053 aluminum alloy with polyvinyl chloride (PVC). Opt Laser Technol. 2018;107:80–88.
   Web of Science ®Google Scholar
• Epsan.com [Internet]. [cited 2022 Aug 30] Available from: https://www.epsan.com/products/.
   Google Scholar
• Ulus H, Kaybal HB, Berber NE, et al. An experimental evaluation on the dynamic response of water aged composite/aluminium adhesive joints: influence of electrospun nanofibers interleaving. Compos Struct. 2022;280:114852.
   Web of Science ®Google Scholar
• ASTM International. D5868-012014 standard test method for lap shear adhesion for fiber reinforced plastic (FRP) bonding. West Conshohocken, PA: ASTM International; 2014.
   Google Scholar
• Maressa P, Anodio L, Bernasconi A, et al. Effect of surface texture on the adhesion performance of laser treated Ti6Al4V alloy. J Adhesion. 2015;91(7):518–537.
   Web of Science ®Google Scholar
• Zhu C, Wan H, Min J, et al. Application of pulsed Yb: fiber laser to surface treatment of al alloys for improved adhesive bonded performance. Opt Lasers Eng. 2019;119:65–76.
   Web of Science ®Google Scholar
• Wu Y, Lin J, Carlson BE, et al. Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys. SurfCoat Technol. 2016;304:340–347.
   Web of Science ®Google Scholar
• Harris AF, Beevers A. The effects of grit-blasting on surface properties for adhesion. Int J Adhes Adhes. 1999;19:445–452.
   Web of Science ®Google Scholar
• Wu LH, Xiao BL, Nagatsuka K, et al. Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment. Compos Struct. 2020;242:112167.
   Web of Science ®Google Scholar
• Lambiase F, Scipioni SI, Lee C-J, et al. A state-of-the-art review on advanced joining processes for metal-composite and metal-polymer hybrid structures. Materials. 2021;14(8):1890.
   PubMed Web of Science ®Google Scholar
• Liu FC, Dong P, Lu W, et al. On the formation of Al-O-C bonds at aluminum/polyamide joint interface. Appl Surf Sci. 2019;466:202–209.
   Web of Science ®Google Scholar
• Al-Sayyad A, Bardon J, Hirchenhahn P, et al. Influence of aluminum laser ablation on ınterfacial thermal transfer and joint quality of laser welded aluminum–polyamide assemblies. Coatings. 2019;9(11):768.
   Web of Science ®Google Scholar
• Naat N, Boutar Y, Naïmi S, et al. Effect of surface texture on the mechanical performance of bonded joints: a review. J Adhes. 2023;99(2):166–258.
   Web of Science ®Google Scholar
• Kim J-K, Mai Y-W. Engineered interfaces in fiber reinforced composites. Oxford, UK: Elsevier; 1998.
   Google Scholar
• Torrisi L, Scolaro C. Treatment techniques on aluminum to modify the surface wetting properties. Acta Phys Pol A. 2015;128(1):48–53.
   Web of Science ®Google Scholar
• Gonzalez-Canche NG, Flores-Johnson EA, Cortes P, et al. Evaluation of surface treatments on 5052-H32 aluminum alloy for enhancing the interfacial adhesion of thermoplastic-based fiber metal laminates. Int J Adhes Adhes. 2018;82:90–99.
   Web of Science ®Google Scholar
• Hirchenhahn P, Al-Sayyad A, Bardon J, et al. Binding mechanisms between laser-welded polyamide-6.6 and native aluminum oxide. ACS Omega. 2021;6(49):33482–33497.
   PubMed Web of Science ®Google Scholar
• Gandla S, Gollu SR, Sharma R, et al. Dual role of boron in improving electrical performance and device stability of low temperature solution processed ZnO thin film transistors. Appl Phys Lett. 2015;107:152102.
   Web of Science ®Google Scholar
• Febvrier A, Jensen J, Eklund P. Wet-cleaning of MgO(001): modification of surface chemistry and effects on thin film growth investigated by x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. J Vac Sci Technol. 2017;35(2):021407.
   Web of Science ®Google Scholar
• Min J, Wan H, Carlson BE, et al. Application of laser ablation in adhesive bonding of metallic materials: a review. Opt Laser Technol. 2020;128:106188.
   Web of Science ®Google Scholar
• Alfano M, Pini S, Chiodo G, et al. Surface patterning of metal substrates through low power laser ablation for enhanced adhesive bonding. J Adhes. 2014;90(5-6):384–400.
   Web of Science ®Google Scholar
• Zhang Z, Sun M, Yu S, et al. Study on the interface bond strength of DP780 steel/CFRP composite laminate based on hot-press curing integration. J Adhes Sci Technol. 2022;22:1–4.
   Google Scholar
• Qiu J, Cai D, Zhang X, et al. Experimental study on properties and structure of magnesium alloy/PC/ABS hybrid materials prepared by hot-press molding technology. J Adhes Sci Technol. 2023;7:1–6.
   Web of Science ®Google Scholar