Prediction of formability and effects of process parameters on the adhesively bonded composite metallic sheets

References

• Pradeep Raja C, Ramesh T, Paavai P, Amal Jerald Joseph M. Numerical and experimental study on hydroforming of thin metallic sheets. In: Dixit US, Kanthababu M, Ramesh Babu A, Udhayakumar S, editors. Advances in forming, machining and automation. Singapore: Springer Nature Singapore; 2023. p. 97–114.
   Google Scholar
• Pradeep Raja C, Ramesh T. Influence of size effects and its key issues during microforming and its associated processes – a review. Eng Sci Technol Int J. 2021;24(2):556–570. doi: 10.1016/j.jestch.2020.08.007.
   Google Scholar
• Lange K. Handbook of metal forming. Kurt Lange. Handbook of Metal Forming, McGraw-Hill, 1985, 4, 188 ISBN 0-07-036285-8.
   Google Scholar
• Zheng R, Lin J, Wang PC, et al. Effects of a sheet metal stamping lubricant on static strength of adhesive-bonded aluminum alloys. J Adhes Sci Technol. 2015;29(13):1382–1402. doi: 10.1080/01694243.2015.1030908.
   Web of Science ®Google Scholar
• Pradeep Raja C, Ramesh T. The effect of severe cryogenic plastic deformation and change in strain path on nanostructured copper through multistep cross rolling. Proc Inst Mech Eng B J Eng Manuf. 2022;095440542211389. doi: 10.1177/09544054221138902.
   Web of Science ®Google Scholar
• Pradeep Raja C, Ramesh T. Extensive plastic deformation to improve the mechanical properties and electrical conductivity of copper through multistep cross rolling. J Mater Eng Perform. 1(4), 213-225. 2023. doi: 10.1007/s11665-023-07873-x.
   Google Scholar
• Paygozar B, Dizaji SA, da Silva LFM. Bonding dissimilar materials via adhesively bonded spot-welded joints: cohesive zone model technique. J Adhes Sci Technol. 2020;34(21):2352–2363. doi: 10.1080/01694243.2020.1761043.
   Web of Science ®Google Scholar
• Boriwal L, Sarviya RM, Mahapatra MM. Optimization of weld bonding process parameters of austenitic stainless steel 304L and low carbon steel sheet dissimilar joints. J Adhes Sci Technol. 2017;31(14):1591–1616. doi: 10.1080/01694243.2016.1266844.
   Web of Science ®Google Scholar
• Pisharody AP, Blandford B, Smith DE, et al. An experimental investigation on the effect of adhesive distribution on strength of bonded joints. Appl Adhes Sci. 2019;7(1):1–12. doi: 10.1186/S40563-019-0122-Y/FIGURES/12.
   Google Scholar
• Adhesive bonding. In Michael J. Troughton (Ed) Handbook of plastics joining. William Andrew Publishing, 2009. p. 145–173. doi: 10.1016/B978-0-8155-1581-4.50019-6.
   Google Scholar
• Mahendran G, Balasubramanian V, Senthilvelan T. Influences of diffusion bonding process parameters on bond characteristics of Mg-Cu dissimilar joints. Trans Nonferrous Met Soc China. 2010;20(6):997–1005. doi: 10.1016/S1003-6326(09)60248-X.
   Web of Science ®Google Scholar
• M. Pizzorni, E. Lertora, C. Mandolfino, S. Vicini, M. Salerno, M. Prato, Comparative characterization of the surface state of Ti-6Al-4V substrates in different pre-bonding conditions, Journal of Advanced Joining Processes, Volume 3, 2021, 100058, ISSN 2666–3309, doi: 10.1016/j.jajp.2021.100058.
   Google Scholar
• Jeevi G, Nayak SK, Abdul Kader M. Review on adhesive joints and their application in hybrid composite structures. J Adhes Sci Technol. 2019;33(14):1497–1520. doi: 10.1080/01694243.2018.1543528.
   Web of Science ®Google Scholar
• Ebnesajjad S. Handbook of adhesives and surface preparation. William Andrew Publishing, Elsevier, 2011, Page iii, ISBN 9781437744613, doi: 10.1016/B978-1-4377-4461-3.10021-5.
   Google Scholar
• Aghchai AJ, Shakeri M, Mollaei-Dariani B. Theoretical and experimental formability study of two-layer metallic sheet (Al1100/St12). Proc Inst Mech Eng Part B J Eng Manuf. 2008;222(9):1131–1138. doi: 10.1243/09544054JEM1140.
   Web of Science ®Google Scholar
• Karajibani E, Fazli A, Hashemi R. Numerical and experimental study of formability in deep drawing of two-layer metallic sheets. Int J Adv Manuf Technol. 2015;80(1-4):113–121. doi: 10.1007/s00170-015-6978-5.
   Web of Science ®Google Scholar
• Manesh HD, Taheri AK. Bond strength and formability of an aluminum-clad steel sheet. J Alloys Compd. 2003;361(1-2):138–143. doi: 10.1016/S0925-8388(03)00392-X.
   Web of Science ®Google Scholar
• Tseng H-C, Hung C, Huang C-C. An analysis of the formability of aluminum/copper clad metals with different thicknesses by the finite element method and experiment. Int J Adv Manuf Technol. 2010;49(9-12):1029–1036. doi: 10.1007/s00170-009-2446-4.
   Web of Science ®Google Scholar
• Morovvati MR, Mollaei-Dariani B, Asadian-Ardakani MH. A theoretical, numerical, and experimental investigation of plastic wrinkling of circular two-layer sheet metal in the deep drawing. J Mater Process Technol. 2010;210(13):1738–1747. doi: 10.1016/j.jmatprotec.2010.06.004.
   Web of Science ®Google Scholar
• Afshin E, Kadkhodayan M. An experimental investigation into the warm deep-drawing process on laminated sheets under various grain sizes. Mater Des. 2015;87:25–35. doi: 10.1016/j.matdes.2015.07.061.
   Web of Science ®Google Scholar
• d’Almeida JRM, Monteiro SN. The effect of the resin/hardener ratio on the compressive behavior of an epoxy system. Polym Test. 1996;15(4):329–339. doi: 10.1016/0142-9418(95)00037-2.
   Web of Science ®Google Scholar
• Satheeshkumar V, Ganesh Narayanan R. Prediction of formability of adhesive bonded steel sheets and experimental validation. Arch Civil Mech Eng. 2015;15(1):30–41. doi: 10.1016/j.acme.2014.09.002.
   Web of Science ®Google Scholar
• Atrian A, Fereshteh-Saniee F. Deep drawing process of steel/brass laminated sheets. Compos B Eng. 2013;47:75–81. doi: 10.1016/j.compositesb.2012.10.023.
   Web of Science ®Google Scholar
• Hashemi A, Gollo MH, Seyedkashi SMH. Study of Al/St laminated sheet and constituent layers in radial pressure-assisted hydrodynamic deep drawing. Mater Manuf Processes. 2017;32(1):54–61. doi: 10.1080/10426914.2015.1127947.
   Web of Science ®Google Scholar
• Lee JE, Bae DH, Chung WS, et al. Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/copper clad-metal sheets. J Mater Process Technol. 2007;187-188:546–549. doi: 10.1016/j.jmatprotec.2006.11.121.
   Web of Science ®Google Scholar
• Atrian A, Panahi H. Experimental and finite element investigation on wrinkling behaviour in deep drawing process of Al3105/polypropylene/Steel304 sandwich sheets. Proc Manuf. 2018;15:984–991. doi: 10.1016/j.promfg.2018.07.396.
   Google Scholar
• Jalil A, Hoseinpour Gollo M, Sheikhi MM, et al. Hydrodynamic deep drawing of double layered conical cups. Trans Nonferrous Met Soc China. 2016;26(1):237–247. doi: 10.1016/S1003-6326(16)64109-2.
   Web of Science ®Google Scholar
• Bagherzadeh S, Mirnia MJ, Mollaei Dariani B. Numerical and experimental investigations of hydro-mechanical deep drawing process of laminated aluminum/steel sheets. J Manuf Process. 2015;18:131–140. doi: 10.1016/j.jmapro.2015.03.004.
   Web of Science ®Google Scholar
• Balasubramanian KBN, Ramesh T. Role, effect, and influences of micro and nano-fillers on various properties of polymer matrix composites for microelectronics: a review. Polym Adv Technol. 2018;29(6):1568–1585. doi: 10.1002/pat.4280.
   Web of Science ®Google Scholar
• Dixit US, Yadav V, Narayanan RG, et al. Friction in micromanufacturing. J Micromanuf. 2018;1(1):76–91. doi: 10.1177/2516598418766918.
   Google Scholar
• Bhushan B. Boundary Lubrication and Lubricants. John Wiley & Sons, 144, 12, (2022), doi: 10.1002/9781118403259.
   Google Scholar
• Taylan Altan, A. Erman Tekkaya, Sheet Metal Forming: Processes and Applications, ASM International, 2012, 978-1-62708-317-1, doi: 10.31399/asm.tb.smfpa.9781627083171
   Google Scholar
• Allen SJ, Mahdavian SM. The effect of lubrication on die expansion during the deep drawing of axisymmetrical steel cups. J Mater Process Technol. 2008;199(1-3):102–107. doi: 10.1016/j.jmatprotec.2007.08.005.
   Web of Science ®Google Scholar
• Rotella G, Alfano M, Schiefer T, et al. Evaluation of mechanical and laser surface pre-treatments on the strength of adhesive bonded steel joints for the automotive industry. J Adhes Sci Technol. 2016;30(7):747–758. doi: 10.1080/01694243.2015.1123559.
   Web of Science ®Google Scholar