Effect of PWHT on metallurgical and mechanical characterization of dissimilar welded joint of P91 and P92 steels

References

• Pandey C, Giri A, Mahapatra MM. Evolution of phases in P91 steel in various heat treatment conditions and their effect on microstructure stability and mechanical properties. Mater Sci Eng, A. 2016;664:58–74. doi: 10.1016/j.msea.2016.03.132.
   Web of Science ®Google Scholar
• Akram J, Kalvala PR, Chalavadi P, et al. Dissimilar metal weld joints of P91/Ni alloy: microstructural characterization of HAZ of P91 and stress analysis at the weld interfaces. J. of Materi Eng and Perform. 2018;27(8):4115–4128. doi: 10.1007/s11665-018-3502-8.
   Web of Science ®Google Scholar
• Akram J, Kalvala PR, Misra M, et al. Creep behavior of dissimilar metal weld joints between P91 and AISI 304. Mater Sci Eng, A. 2017;688:396–406. doi: 10.1016/j.msea.2017.02.026.
   Web of Science ®Google Scholar
• Silwal B, Li L, Deceuster A, et al. Effect of postweld heat treatment on the toughness of heat-affected zone for grade 91 steel. Welding J. 2013;92:80s–87s.
   Web of Science ®Google Scholar
• Pešička J, Kužel R, Dronhofer A, et al. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels. Acta Mater. 2003;51(16):4847–4862. doi: 10.1016/S1359-6454(03)00324-0.
   Web of Science ®Google Scholar
• Choudhary BK, Saroja S, Rao KBS, et al. Creep-rupture behavior of forged, thick section 9Cr–1Mo ferritic steel. Metall Mater Trans A. 1999;30(11):2825–2834. doi: 10.1007/s11661-999-0120-y.
   Web of Science ®Google Scholar
• Klueh RL. Elevated-temperature ferritic and martensitic steel and their application to future nuclear reactor, int. Mater Rev. 2005;50(5):287–310. doi: 10.1179/174328005X41140.
   Web of Science ®Google Scholar
• Mannan SL, Chetal SC, Raj B, et al. Selection of materials for prototype fast breeder reactor, trans. Indian Inst Met. 2003;56:155–178.
   Web of Science ®Google Scholar
• Murty KL, Charit I. Structural materials for Gen-IV nuclear reactors: challenges and opportunities. J Nucl Mater. 2008;383(1-2):189–195. doi: 10.1016/j.jnucmat.2008.08.044.
   Web of Science ®Google Scholar
• Yan W, Wang W, Shan YY, et al. Microstructural stability of 9-12%Cr ferrite/martensite heat-resistant steels. Front Mater Sci. 2013;7(1):1–27. doi: 10.1007/s11706-013-0189-5.
   Web of Science ®Google Scholar
• Zhang XZ, Wu XJ, Liu R, et al. Influence of laves phase on creep strength of modified 9Cr-1Mo steel. Mater Sci Eng A. 2017;706:279–286. doi: 10.1016/j.msea.2017.08.111.
   Web of Science ®Google Scholar
• Albert SK, Matsui M, Watanabe T, et al. Variation in the type IV cracking behaviour of a high Cr steel weld with post weld heat treatment. Int J Press Vessel Pip. 2003;80(6):405–413. doi: 10.1016/S0308-0161(03)00072-3.
   Web of Science ®Google Scholar
• Wang Y, Kannan R, Li L. Correlation between intercritical heat-affected zone and type IV creep damage zone in grade 91 steel. Metall Mater Trans A. 2018;49(4):1264–1275. doi: 10.1007/s11661-018-4490-x.
   Web of Science ®Google Scholar
• Maruyama K, Sawada K, Koike J-I Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int. 2001;41(6):641–653. doi: 10.2355/isijinternational.41.641.
   Web of Science ®Google Scholar
• Ghassemi-Armaki A H, Chen A RP, Maruyama A K, et al. Static recovery of tempered lath martensite microstructures during long-term aging in 9–12% Cr heat resistant steels. Mater Lett. 2009;63(28):2423–2425. doi: 10.1016/j.matlet.2009.08.024.
   Web of Science ®Google Scholar
• Ghassemi Armaki H, Chen R, Maruyama K, et al. Creep behavior and degradation of subgrain structures pinned by nanoscale precipitates in strength-enhanced 5 to 12 pct Cr ferritic steels. Metall Mater Trans A. 2011;42(10):3084–3094. doi: 10.1007/s11661-011-0726-8.
   Web of Science ®Google Scholar
• Fevzi KF, Vodopivec, JV, Turna. Effect of tempering on the room-temperature mechanical properties of X20CrMoV121 and P91 steels. Mater Technol. 2012;46(5):459–464.
   Google Scholar
• Panait CG, Bendick W, Fuchsmann A, et al. Study of the microstructure of the grade 91 steel after more than 100,000 h of creep exposure at 600 °C. Int J Press Vessels Pip. 2010;87(6):326–335. doi: 10.1016/j.ijpvp.2010.03.017.
   Web of Science ®Google Scholar
• Abson DJ, Rothwell JS. Review of type IV cracking of weldments in 9–12% Cr creep strength enhanced ferritic steels. Int Mater Rev. 2013;58(8):437–473. doi: 10.1179/1743280412Y.0000000016.
   Web of Science ®Google Scholar
• Be F. Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels. Mater Sci Eng A. 2001;319–321:770–773.
   Web of Science ®Google Scholar
• Sakthivel T, Selvi SP, Laha K. An assessment of creep deformation and rupture behaviour of 9Cr-1.8W-0.5Mo-VNb (ASME grade 92) steel. Mater Sci Eng, A. 2015;640:61–71. doi: 10.1016/j.msea.2015.05.068.
   Web of Science ®Google Scholar
• Maduraimuthu V, Vasudevan M, Muthupandi V, et al. Effect Of activated flux on the microstructure, mechanical properties, and residual stresses of modified 9Cr-1Mo steel weld joints. Metall Mater Trans B. 2012;43(1):123–132. doi: 10.1007/s11663-011-9568-4.
   Web of Science ®Google Scholar
• Wu R, Sandström R, Seitisleam F. Influence of extra coarse grains on creep properties of 9 percent CrMoV(P91) steel weldment. Eng Mater Technol. 2004;126(1):87–94. doi: 10.1115/1.1631025.
   Web of Science ®Google Scholar
• Francis JA, Mazur W, Bhadeshia HKDH. Type IV cracking in ferritic power plant steels. Mater Sci Technol. 2006;22(12):1387–1395. doi: 10.1179/174328406X148778.
   Web of Science ®Google Scholar
• Laha K, Chandravathi KS, Parameswaran P, et al. Characterization of microstructures across the Heat-Affected zone of the modified 9Cr-1Mo weld joint to understand its role in promoting type IV cracking. Metall Mater Trans A. 2007;38(1):58–68. doi: 10.1007/s11661-006-9050-0.
   Web of Science ®Google Scholar
• Pandey C, Mahapatra MM. Effect of long-term ageing on the microstructure and mechanical properties of creep strength enhanced ferritic P91 steel. Trans Indian Inst Met. 2016;69(9):1657–1673. doi: 10.1007/s12666-015-0826-z.
   Web of Science ®Google Scholar