Experimental investigation on microstructure and properties of Al alloy-PEEK joint with different surface structure obtained by hot-pressing

References

• Suzuki A, Arai Y, Takata N, et al. Effect of layer thickness on bonding strength of Al/epoxy resin joints via interpenetrating phase layer. J Mater Process Tech. 2018;254:338–345. doi: 10.1016/j.jmatprotec.2017.10.054.
   Web of Science ®Google Scholar
• Karlsson KF, TomasÅström B. Manufacturing and applications of structural sandwich components. Compos Part A-Appl S. 1997;28(2):97–111. doi: 10.1016/S1359-835X(96)00098-X.
   Web of Science ®Google Scholar
• Yeh RY, Hsu RQ. Improving the adhesion of plastic/metal direct bonding by injection moulding using surface modifications. Adv Mater Process Tech. 2016;2:21–30.
   Google Scholar
• Amancio-Filho ST, Bueno C, dos Santos JF, et al. On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures. Mater Sci Eng A. 2011;528(10–11):3841–3848. doi: 10.1016/j.msea.2011.01.085.
   Web of Science ®Google Scholar
• Schmid A, Haubold T, Koschek K, et al. Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol-gel epoxy system. IOP Conf Ser: Mater Sci Eng. 2021;1147(1):012022. doi: 10.1088/1757-899X/1147/1/012022.
   Google Scholar
• Grujicic M, Sellappan V, Omar MA, et al. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components. J Mater Process Tech. 2008;197(1–3):363–373. doi: 10.1016/j.jmatprotec.2007.06.058.
   Web of Science ®Google Scholar
• Ramani K, Tagle J. Process-induced effects in thin-film bonding of PEEK in metal-polymer joints. Polym Composite. 1996;17(6):879–886. doi: 10.1002/pc.10681.
   Web of Science ®Google Scholar
• May M, Wang HM, Akid R. Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol-gel epoxy system. Int J Adhes Adhes. 2010;30(6):505–512. doi: 10.1016/j.ijadhadh.2010.05.002.
   Web of Science ®Google Scholar
• Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. J Adv Join Process. 2022;5:100113. doi: 10.1016/j.jajp.2022.100113.
   Google Scholar
• Hamed Aghajani D, Reza KF, Farzad K. Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer. Weld World. 2018;62:117–130.
   Web of Science ®Google Scholar
• Francesca L, Claudio M, Paola L, et al. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization. Compos Part B Eng. 2018;144:134–142.
   Web of Science ®Google Scholar
• Sun YB, Wang WB, Long HW, et al. Investigation on the pretreatment groove of metal surface of the aluminium alloy/polycarbonate friction stir lap welding. J Adhes Sci Technol. 2023; Online. doi: 10.1080/01694243.2023.2267271.
   Web of Science ®Google Scholar
• Wen Y, Li SL, Huang J, et al. Micro-nano interfacial mechanical interlocking structure property of the ultrasonic-assisted hot press molded polypropylene/aluminum alloy hybrid. J Adhes Sci Technol. 2023;37(3):452–468. doi: 10.1080/01694243.2022.2034711.
   Web of Science ®Google Scholar
• Cai D, Wen Y, Qiu J, et al. Mechanical property and structure of polycarbonate/aluminum alloy hybrid prepared by ultrasound-assisted hot-pressing technology. J Adhesion. 2023;99(8):1356–1379. doi: 10.1080/00218464.2022.2107426.
   Web of Science ®Google Scholar
• Qiu J, Cai D, Zhang XX, et al. Experimental study on properties and structure of magnesium alloy/PC/ABS hybrid materials prepared by hot-press molding technology. J Adhes Sci Technol. 2023;37(19):2667–2682. doi: 10.1080/01694243.2023.2165230.
   Web of Science ®Google Scholar
• Zhang X, Ma QY, Dai Y, et al. Effects of surface treatments and bonding types on the interfacial behavior of fiber metal laminate based on magnesium alloy. Appl Surf Sci. 2018;427:897–906. doi: 10.1016/j.apsusc.2017.09.024.
   Web of Science ®Google Scholar
• Pan YC, Wu GQ, Cheng X, et al. Mode I and mode II interlaminar fracture toughness of CFRP/magnesium alloys hybrid laminates. Compos Interface. 2016;23(5):453–465. doi: 10.1080/09276440.2016.1144911.
   Web of Science ®Google Scholar
• Zhou PP, Wu X, Pan YC, et al. Mechanical properties of carbon fibre-reinforced polymer/magnesium alloy hybrid laminates. Mater Res Express. 2018;5(4):046523. doi: 10.1088/2053-1591/aabbeb.
   Web of Science ®Google Scholar
• Chen J, Du KP, Chen XM, et al. Influence of surface microstructure on bonding strength of modified polypropylene/aluminum alloy direct adhesion. Appl Surf Sci. 2019;489:392–402. doi: 10.1016/j.apsusc.2019.05.270.
   Web of Science ®Google Scholar
• Du KP, Huang J, Chen J, et al. Mechanical property and structure of polypropylene/aluminum alloy hybrid prepared via ultrasound-assisted hot-pressing technology. Materials. 2020;13(1):236. doi: 10.3390/ma13010236.
   PubMed Web of Science ®Google Scholar
• Du KP, Huang J, Li C, et al. The bonding strength of polyamide-6 direct adhesion with anodized AA5754 aluminum alloy. J Thermoplast Compos Mater. 2022;35(11):1852–1865. doi: 10.1177/0892705720939139.
   Web of Science ®Google Scholar
• Su YB, Rooij MD, Grouve W, et al. The effect of titanium surface treatment on the interfacial strength of titanium-thermoplastic composite joints. Int J Adhes Adhes. 2017;72:98–108. doi: 10.1016/j.ijadhadh.2016.10.007.
   Web of Science ®Google Scholar
• Harris AF, Beevers A. The effects of grit-blasting on surface properties for adhesion. Int J Adhes Adhes. 1999;19(6):445–452. doi: 10.1016/S0143-7496(98)00061-X.
   Web of Science ®Google Scholar
• Pan YC, Wu GQ, Huang Z, et al. Effect of surface roughness on interlaminar peel and shear strength of CFRP/Mg laminates. Int J Adhes Adhes. 2017;79:1–7. doi: 10.1016/j.ijadhadh.2017.08.004.
   Web of Science ®Google Scholar
• Prolongo SG, Uren A. Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints. Int J Adhes Adhes. 2009;29(1):23–31. doi: 10.1016/j.ijadhadh.2008.01.001.
   Web of Science ®Google Scholar
• Bjorgum A, Lapique F, Walmsley J, et al. Anodising as pre-treatment for structural bonding. Int J Adhes Adhes. 2003;23(5):401–412. doi: 10.1016/S0143-7496(03)00071-X.
   Web of Science ®Google Scholar
• Critchlow GW, Yendall KA, Bahrani D, et al. Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys. Int J Adhes Adhes. 2006;26(6):419–453. doi: 10.1016/j.ijadhadh.2005.07.001.
   Web of Science ®Google Scholar
• Huang HJ, Sun MX, Xiao W, et al. Effect of interfacial nanostructures on shear strength of Al-PPS joints fabricated via injection moulding method combined with anodising. Surf Coat Tech. 2021;428:127896. doi: 10.1016/j.surfcoat.2021.127896.
   Web of Science ®Google Scholar
• Carrino L, Napolitano G, Sorrentino L. Wettability improving of 2024 aluminium alloy by oxygen cold plasma treatment. Int J Adv Manuf Technol. 2006;31(5-6):465–473. doi: 10.1007/s00170-005-0214-7.
   Web of Science ®Google Scholar
• Byskov-Nielsen J, Boll JV, Holm AH, et al. Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces. Int J Adhes Adhes. 2010;30(6):485–488. doi: 10.1016/j.ijadhadh.2010.03.008.
   Web of Science ®Google Scholar
• Roesner A, Scheik S, Olowinsky A, et al. Laser assisted joining of plastic metal hybrids. Physics Procedia. 2011;12:370–377. doi: 10.1016/j.phpro.2011.03.146.
   Google Scholar
• Liu MR, Ma GY, Liu DH, et al. Microstructure and mechanical properties of aluminum alloy prepared by laser-arc hybrid additive manufacturing. J Laser Appl. 2020;32:022052.
   Web of Science ®Google Scholar
• He XK, Xie CS, Xiao LJ, et al. Microstructure and impact toughness of 16MND5 reactor pressure vessel steel manufactured by electrical additive manufacturing. J Iron Steel Res Int. 2020;27(8):992–1004. doi: 10.1007/s42243-020-00467-0.
   Web of Science ®Google Scholar
• Lambiase F, Paoletti A. Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by friction assisted joining. Compos Struct. 2018;189:70–78. doi: 10.1016/j.compstruct.2018.01.045.
   Web of Science ®Google Scholar
• Ramani K, Moriarty B. Thermoplastic bonding to metals via injection molding for macro-composite manufacture. Polymer Eng Sci. 1998;38(5):870–877. doi: 10.1002/pen.10253.
   Web of Science ®Google Scholar
• Ramani K, Zhao WP. The evolution of residual stresses in thermoplastic bonding to metals. Int J Adhes Adhes. 1997;17(4):353–357. doi: 10.1016/S0143-7496(97)00030-4.
   Web of Science ®Google Scholar
• Lambiase F, Genna S. Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with polyetheretherketone (PEEK). Int J Adhes Adhes. 2018;84:265–274. doi: 10.1016/j.ijadhadh.2018.04.004.
   Web of Science ®Google Scholar