Study on the interfacial microstructure evolution of aluminum and CFRTP on FSLW joints: influence of pin length

References

• Huang Y, Meng X, Xie Y, et al. Friction stir welding/processing of polymers and polymer matrix composites. Compos Part A: Appl Ence Manufact. 2017;105:235–257. doi: 10.1016/j.compositesa.2017.12.005.
   Web of Science ®Google Scholar
• Çam G, Javaheri V, Heidarzadeh A. Advances in FSW and FSSW of dissimilar Al-alloy plates. J Adhes Sci Technol. 2023;37(2):162–194. doi: 10.1080/01694243.2022.2028073.
   Web of Science ®Google Scholar
• Huang G, Cheng D, Wang H, et al. Effect of tool probe with a disc at the top on the microstructure and mechanical properties of FSW joints for 6061-T6 aluminum alloy. J Adhes Sci Technol. 2019;33(22):2462–2475. doi: 10.1080/01694243.2019.1645381.
   Web of Science ®Google Scholar
• Khan NZ, Siddiquee AN, Khan ZA, et al. Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys. J Alloys Compd. 2015;648:360–367. doi: 10.1016/j.jallcom.2015.06.246.
   Web of Science ®Google Scholar
• Mouria PK, Singari RM, Wattal R. Influence of rotational tool speed on metallurgical characterization of friction stir welded joint of AZ91D and AA2024. J Adhes Sci Technol. 2023:1–21:0169-4243. doi: 10.1080/01694243.2023.2245196.
   Web of Science ®Google Scholar
• Mugada, KK, Adepu K. Influence of ridges shoulder with polygonal pins on material flow and friction stir weld characteristics of 6082 aluminum alloy. J Manuf Processes. 2018;32(APR):625–634. doi: 10.1016/j.jmapro.2018.03.034.
   Google Scholar
• Biswas P, Kumar DA, Mandal NR., Friction stir welding of aluminum alloy with varying tool geometry and process parameters. Proc Inst Mech Eng Part B: J Eng Manufact. 2011;226(4):641–648. doi: 10.1177/0954405411424111.
   Google Scholar
• Kumar J, Majumder S, Mondal AK, et al. Influence of rotation speed, transverse speed, and pin length during underwater friction stir welding (UW-FSW) on aluminum AA6063: a novel criterion for parametric control. Int J Lightweight Mater Manuf. 2022;5(3):295–305. doi: 10.1016/j.ijlmm.2022.03.001.
   Google Scholar
• Zaman KN, Noor SA, Khan ZA. Proposing a new relation for selecting tool pin length in friction stir welding process. Measurement. 2018;129:112–118. doi: 10.1016/j.measurement.2018.07.015.
   Web of Science ®Google Scholar
• Liang Z, Chen K, Wang X, et al. Effect of tool offset and tool rotational speed on enhancing mechanical property of Al/Mg dissimilar FSW joints. Metall Mater Trans A. 2013;44(8):3721–3731. doi: 10.1007/s11661-013-1700-4.
   Web of Science ®Google Scholar
• Hejazi I, Mirsalehi SE. Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy. Trans Nonferrous Met Soc China. 2016;26(3):676–683. doi: 10.1016/S1003-6326(16)64158-4.
   Web of Science ®Google Scholar
• Zheng Q, Feng X, Shen Y, et al. Effect of plunge depth on microstructure and mechanical properties of FSW lap joint between aluminum alloy and nickel-base alloy. J Alloys Comp. 2017;695:952–961. doi: 10.1016/j.jallcom.2016.10.213.
   Web of Science ®Google Scholar
• Memon S, Fydrych D, Fernandez AC, et al. Effects of FSW tool plunge depth on properties of an Al-Mg-Si alloy T-joint: thermomechanical modeling and experimental evaluation. Materials 2021;14(16):4754. doi: 10.3390/ma14164754.
   PubMed Web of Science ®Google Scholar
• Rao CV, Reddy GM, Rao KS. Microstructure and pitting corrosion resistance of AA2219 Al–Cu alloy friction stir welds–effect of tool profile. Defence Technol. 2015;11(2):123–131.
   Google Scholar
• Sun YB, Zhang Y, Long HW, et al. Friction stir lap welding for dissimilar materials of aluminum alloy and carbon-fiber-reinforced polyetherimide. Mater Today Commun. 2022;33:104427. doi: 10.1016/j.mtcomm.2022.104427.
   Web of Science ®Google Scholar
• Xu Y, Ke LM, Mao YQ, et al. Interfacial microstructure evolution of thick plate Al/Mg FSW: effect of pin size. Mater Charact. 2021;174:111022. doi: 10.1016/j.matchar.2021.111022.
   Web of Science ®Google Scholar
• Derazkola HA, Simchi A. A new procedure for the fabrication of dissimilar joints through injection of colloidal nanoparticles during friction stir processing: proof concept for AA6062/PMMA joints. J Manuf Processes. 2020;49:335–343. doi: 10.1016/j.jmapro.2019.12.008.
   Web of Science ®Google Scholar
• Xue P, Ni DR, Wang D, et al. Ma effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al–Cu joints. Mater Sci Eng A. 2011;528(13-14):4683–4689. doi: 10.1016/j.msea.2011.02.067.
   Web of Science ®Google Scholar