REFERENCES
- Utracki , L. A. Polymer Alloys and Blends ; Hanser : Munich , 1989 .
- Bucknall , C. B. Toughened Plastics ; Applied Science Publishers : London , 1977 .
- Elmendorp , J. J. ; Van der Vegt , A. K. A Study on Polymer Blending Microrheology: Part IV The Influence of Coalescence on Blend Morphology Origination . Polym. Eng. Sci. 1986 , 26 , 1332 – 1338
- Sundararaj , U. ; Macosko , C. W. Drop Breakup and Coalescence in Polymer Blends: The Effects of Concentration and Compatibilization . Macromolecules 1995 , 28 , 2647 – 2657
- Sundararaj , U. Effect of Elasticity on Polymer Blend Microstructure . Proceedings of Soc. Plast. Eng. 53rd ANTEC 1995 , 2 , 3228 – 3231
- Taylor , G. I. The Viscosity of a Fluid Containing Small Drops of Another Fluid . Proc. Roy. Soc. 1932 , A138 , 41 – 48
- Gupta , R. K. Polymer and Composite Rheology ; 2nd Ed. ; Chapter 12 , Marcel Dekker : New York , 2000 .
- Grace , H. P. Dispersion Phenomena in High Viscosity Immiscible Fluid Systems and Application of Static Mixers as Dispersion Devices in such Systems . Chem. Eng. Commun. 1982 , 14 , 225 – 277
- Janssen , J. M. H. Dynamics of Liquid-Liquid Mixing . Ph.D. Dissertation, University of Technology, Eindhoven, The Netherlands, 1993 .
- Vanoene , H. Modes of Dispersion of Viscoelastic Fluids in Flow . J. Colloid Interface Sci. 1972 , 40 , 448 – 467
- Elmendorp , J. J. ; Maalcke , R. J. A Study on Polymer Blending Microrheology: Part 1 . Polym. Eng. Sci. 1985 , 25 , 1041 – 1047
- Mighri , F ; Carreau , P. J. ; Ajji. A. Influence of Elastic Properties on Drop Deformation and Breakup in Shear Flow. J. Rheol. 1998 , 42 , 1477 – 1490
- Al-Mulla , A. ; Gupta , R. K. Droplet Coalescence in the Shear Flow of Model Emulsions . Rheol. Acta 2000 , 39 , 20 – 25
- Chesters , A. K. The Modeling of Coalescence Processes in Fluid-Liquid Dispersions: A Review of Current Understanding . Trans. IchemE 1991 , 69A , 259 – 270
- Milner , S. T. How Do Copolymer Compatibilizers Really Work? Mater . Res. Soc. Bulletin , January 1997 , 38 – 42
- Moldenaers , P. Recent Advances in Blend Rheology and Morphology . Proceedings XIIIth Int. Congress on Rheol., Cambridge, UK , 2000 , 1 , 57 – 60
- Wu , S. Surface and Interfacial Tensions of Polymers, Oligomers, Plasticizers, and Organic Pigments. In Polymer Handbook ; 3rd Ed. ; Brandrup , J. ; Immergut , E. H. , Eds.; Wiley : New York , 1989 ; VI/411 - VI/434
- Xanthos , M. The Physical and Chemical Nature of Plastics Additives. In Mixing and Compounding of Polymers ; Manas-Zloczower, I.; Tadmor , Z. , Eds.; Hanser : Munich , 1994 ; 471 – 492
- Underwood , E. E. Quantitative Stereology ; Addison-Wesley : Reading , MA , 1970 ; Chapter 5 .
- Alsewailem , F. D. The Influence of Processing Conditions on the Dispersed Phase Size in Immiscible Polymer Blends . MS Thesis, Department of Chemical Engineering, West Virginia University, Morgantown, 1998 .
- Burkhardt , K ; Herrmann , H. ; Jakopin , S. Plasticizing and Mixing Principles of Intermeshing Co-Rotating and Counter-Rotating Twin Screw Extruders . Proceedings Soc. Plast. Eng. 36th ANTEC 1978 , 498 – 506
- Tadmor , Z. ; Gogos , C. G. Principles of Polymer Processing , Wiley , New York , 1979 , 389 – 396
- Beck Tan , N. C. ; Tai , S. -K; Briber , R. M. Morphology Control and Interfacial Reinforcement in Reactive Polystyrene/Amorphous Polyamide Blends . Polymer 1996 , 37 , 3509 – 3518
- Ghodgaonkar , P. G. ; Sundararaj , U. Prediction of Dispersed Phase Drop Diameter in Polymer Blends: The Effect of Elasticity . Polym. Eng. Sci. 1996 , 36 , 1658 – 1665