Survey of infrared sensing techniques for welding process monitoring and control

IV. References

• Andrews , D. R. and Wells , D. M. K. 1980 . “Dynamic Resistance Monitoring Applied to Projection Welding,” . Metal Construction , 12 ( 1 ) : 30
   Google Scholar
• Archer , G. R. 1959 . “A New System for Automatic Feedback Control of Resistance Spot Welding,” . Welding Journal , 38 ( 10 ) : 987 – 993 .
   Google Scholar
• Banerjee , P. and Chin , B. A. 1993 . “Gradient Technique for Dynamic Bead Width Control in Robotic Gas Tungsten Arc Welding,” . In International Trends in Welding Research , Edited by: David , S. A. and Vitek , J. M. 937 – 941 . Metals Park, OH : ASM International .
   Google Scholar
• Banerjee , P. , Liu , J. and Chin , B. A. 1992 . “Infrared Thermography for Non‐destructive Monitoring of Weld Penetration Variations,” . In Proceedings of the Japan U.S.A. Symposium on Flexible Automation , Edited by: Liu , M. 291 – 295 . New York : ASME .
   Google Scholar
• Banerjee , P. , Govardhan , S. , Wikle , H. C. III and Chin , B. A. 1995 . “Infrared Sensing for on‐line Geometry Monitoring and Control,” Transactions of the ASME . Journal of Engineering for Industry , 117 : 323 – 330 .
   Google Scholar
• Bangs , E. R. 1988 . “Infrared Signature Analysis: Real Time Monitoring of Manufacturing Processes,” . In Thermosense X: An International Conference on Thermal Infrared Sensing for Diagnostics and Control Edited by: Lucier , R. D. 111 – 119 . Proc. SPIE 934
   Google Scholar
• Barry , J. M. , Paley , Z. and Adams , C. M. Jr. 1963 . “Heat Conduction from Moving Arc in Welding,” . Welding Journal , 42 ( 3 ) : 97 – 104 .
   Google Scholar
• Beatson , E. V. 1977 . “An Introduction to Quality Control Systems in Resistance Welding,” . In Resistance Welding Control and Monitoring , 2 – 7 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Begin , C. and Boillot , J. 1984 . “Welding Adaptive Functions Performed Through Infrared (IR) Simplified Vision Schemes,” . In In Intelligent Robots: Third International Conference on Robot Vision and Sensory Controls Ro ViSeC3 Edited by: Casasent , D. P. 328 – 337 . Proc. SPIE 449
   Google Scholar
• Bentley , A. E. and Marburger , S. J. 1992 . “Arc Welding Penetration Control Using Quantitative Feedback Theory,” . Welding Journal , 71 ( 11 ) : 397 – 405 .
   Google Scholar
• Bhattacharya , S. and Andrews , D. R. 1972 . “Resistance‐weld Quality Monitoring,” . Sheet Metal Industries , 49 ( 7 ) : 460 – 466 .
   Google Scholar
• Bhattacharya , S. and Andrews , D. R. 1974 . “Significance of Dynamic Resistance Curves in Theory and Practice of Spot Welding,” . Welding and Metal Fabrication , 42 ( 2 ) : 296
   Google Scholar
• Bhattacharya , S. and Andrews , D. R. 1969 . Welding and Metal Fabrication , 37 ( 11 ) : 448 – 449 .
   Google Scholar
• Bobo , S. N. and Crowley , A. H. 1968 . “Use of Contiguous Optical Fibers as a Means of Carrying Thermal Information from Welds,” . Applied Optics , 7 ( 9 ) : 1839 – 1844 .
   PubMedGoogle Scholar
• Boillot , J. P. , Cielo , P. , Begin , G. , Michel , C. , Lessard , M. , Fafard , P. and Villemure , D. 1985 . “Adaptive Welding by Fiber Optic Thermographic Sensing: an Analysis of Thermal and Instrumental Considerations,” . Welding Journal , 64 ( 7 ) : 209 – 217 .
   Google Scholar
• Boughton , P. , Rider , G. and Smith , C. J. 1978 . “Feedback Control of Weld Penetration,” . In Advances in Welding Processes , Edited by: Needham , J. C. 203 – 209 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Brown , B. and Bangs , E. “The Measurement and Monitoring of Resistance Spot Welds Using Infrared Thermography,” . An International Conference on Thermal Infrared Sensing for Diagnostics and Control . Edited by: Kaplan , H. pp. 57 – 69 . Proc. SPIE 581
   Google Scholar
• Burbank , G. E. and Taylor , M. D. 1965 . “Ultrasonic In‐Process Inspection of Resistance Spot Welding . Welding Journal , 44 ( 5 ) : 193 – 198 .
   Google Scholar
• Chen , W. H. and Chin , B. A. 1990 . “Monitoring Joint Penetration Using Infrared Sensing Techniques,” . Welding Journal , 69 ( 4 ) : 181 – 185 .
   Google Scholar
• Chen , W. H. , Nagarajan , S. and Chin , B. A. “Weld Penetration Sensing and Control,” . Infrared Technology XIV, Proc. SPIE 972 . pp. 268 – 272 .
   Google Scholar
• Chin , B. A. , Madsen , N. H. and Goodling , J. S. 1983 . “Infrared Thermography for Sensing the Aarc Welding Process,” . Welding Journal , 62 ( 9 ) : 227 – 234 .
   Web of Science ®Google Scholar
• Chuloshnikov , P. L. and Verdenski , V. B. 1963 . “Certain Work on the Control of Spot and Seam Welding . Automatic Welding , 16 ( 5 ) : 9 – 13 .
   Google Scholar
• Deam , R. T. , Salter , R. J. and Smith , C. J. 1987 . “Computer Control of Penetration in MIG Welding,” . In Computer Technology in Welding , Edited by: Lucas , W. 45 – 59 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Dickinson , D. W. , Franklin , J. E. and Stanya , A. 1980 . “Characterization of Spot Welding Behavior by Dynamic Electrical Parameter Monitoring,” . Welding Journal , 59 ( 6 ) : 170 – 176 .
   Google Scholar
• Dornfield , D. A. , Tomizuka , M. and Langari , G. 1982 . “Modeling and Adaptive Control of Arc Welding Processes,” . In Measurement and Control for Batch Manufacturing , Edited by: Hardt , D. E. 53 – 64 . New York : ASME .
   Google Scholar
• Dorschu , K. E. 1968 . “Control of Cooling Rate in Steel Weld Metal,” . Welding Journal , 47 ( 2 ) : 49 – 62 .
   Google Scholar
• Doumanidis , C. C. and Marquis , B. P. “Thermal Simulation and Visualization of Virtual Source Manufacturing Systems,” . Proceedings of the Computers in Engineering Conference and the Engineering Database Symposium . pp. 933 – 939 . New York : ASME .
   Google Scholar
• Doumanidis , C. C. and Hardt , D. E. 1989 . “A Model for in‐Process Control of Thermal Properties During Welding,” . ASME Journal of Dynamic Systems, Measurement and Control , 111 ( 1 ) : 40 – 50 .
   Google Scholar
• Doumanidis , C. C. and Hardt , D. E. 1990 . “Simultaneous In‐process Control of Heat‐affected Zone and Cooling Rate During Arc Welding,” . Welding Journal , 79 ( 5 ) : 186 – 196 .
   Google Scholar
• Doumanidis , C. C. and Hardt , D. E. 1991 . “Multivariable Adaptive Control of Thermal Properties During Welding,” . ASME Journal of Dynamic Systems, Measurement and Control , 113 ( 1 ) : 82 – 92 .
   Google Scholar
• Doumanidis , C. C. 1994 . “Lumped Multitorch Control of Welding During Production,” . ASME Journal of Engineering for Industry. , 116 ( 3 ) : 348 – 354 .
   Google Scholar
• Doumanidis , C. C. 1994 . “Modeling and Control of Timeshared and Scanned Torch Welding,” . ASME Journal of Dynamic Systems, Measurement, and Control. , 116 ( 3 ) : 387 – 395 .
   Google Scholar
• Fuchs , E. A. , Bertram , L. A. , Bentley , A. E. and Marburger , S. J. “Evaluation of Feedback Parameters for Weld Process Control,” . Thermosense XIV: An International Conference on Thermal Sensing and Imaging Diagnostic Applications . Edited by: Eklund , J. pp. 155 – 159 . Proc. SPIE 1682
   Google Scholar
• Govardhan , S. M. and Chin , B. A. 1990 . “Monitoring GTA Weld Puddle Geometry Using Measured Surface Temperature Gradients,” . In Recent Trends in Welding Science and Technology , Edited by: David , S. A. and Vitek , J. M. 383 – 386 . Metals Park, OH : ASM International .
   Google Scholar
• Govardhan , S. M. , Wikle , H. C. III and Chin , B. A. “Real‐time Welding Process Control Using Infrared Sensors,” . 1995 Proceedings of the American Control Conference . American Control Institute .
   Google Scholar
• Greenwood , J. A. and Williamson , J. B. P. 1958 . “Electrical Conduction in Solids. II. Theory of Temperature Dependant Conductors,” . Proc. Royal Soc. (London) , 264a ( 12244 ) : 13 – 31 .
   Google Scholar
• Groom , K. N. , Nagarajan , S. and Chin , B. A. 1990 . “Automatic Single V‐groove Welding Utilizing Infrared Images for Error Detection and Correction,” . Welding Journal , 79 ( 12 ) : 441 – 445 .
   Google Scholar
• Gubenko , T. P. 1963 . Welding Production , 102 : 42 – 45 .
   Google Scholar
• Johnson , K. I. 1977 . “Voltage Spot Weld Correction Unit Developed by the Welding Institute,” . In Resistance Welding Control and Monitoring , 19 – 28 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Kannatey‐Asibu , E. Jr , Kikuchi , N. and Jallad , A. R. 1989 . “Experimental Finite Element Analysis of Temperature Distribution During Arc Welding,” . ASME Journal of Engineering Materials and Technology , 111 : 9 – 18 .
   Google Scholar
• Khan , M. A. , Madsen , N. H. , Goodling , J. S. and Chin , B. A. 1986 . “Infrared Thermography as a Control for the Welding Process,” . Optical Engineering , 25 ( 6 ) : 799 – 805 .
   Google Scholar
• Lukens , W. E. and Morris , R. A. 1982 . “Infrared Temperature Sensing of Cooling Rates for Arc Welding Control,” . Welding Journal , 61 ( 1 ) : 27 – 33 .
   Google Scholar
• Malmuth , N.D. , Hall , W. F. , Davis , B. I. and Rosen , C. D. 1974 . “Transient Thermal Phenomena and Weld Geometry in GTAW,” . Welding Journal , 53 ( 9 ) : 388 – 400 .
   Google Scholar
• Nagarajan , S. , Wikle , H. C. III and Chin , B. A. 1993 . “On‐line Identification and Control of Part‐prepa Ration and Fixturing Errors in Arc Welding,” Transactions of the ASME . Journal of Engineering for Industry , 115 : 385 – 389 .
   Google Scholar
• Nagarajan , S. , Wikle , H. C. III and Chin , B. A. 1992 . “On‐line Weld Position Control for Fusion Reactor Welding,” . Journal of Nuclear Materials , : 191 – 194 . 1060 – 1064 .
   Google Scholar
• Nagarajan , S. , Banerjee , P. , Chen , W. H. and Chin , B. A. 1992 . “Control of the Welding Process Using Infrared Sensors,” . IEEE Transactions on Robotics and Automation , 8 ( 1 ) : 86 – 93 .
   Google Scholar
• Nagarajan , S. , Chen , W. H. and Chin , B. A. 1989 . “Infrared Sensing for Adaptive Arc Welding,” . Welding Journal , 68 ( 11 ) : 462 – 466 .
   Google Scholar
• Nomura , H. , Satoh , Y. , Tohno , K. , Sato , Y. and Kurotori , M. 1980 . “Arc Light Controls Current in SA Welding System,” . Welding and Metal Fabrication , : 457 – 465 .
   Google Scholar
• Raghavan , S. , Wikle , H. C. III and Chin , B. A. 1993 . “Adaptive Control of Arc Welding Using Infrared Sensing,” . In Thermosense XV: An International Conference on Thermal Sensing and Imaging Diagnostic Applications Edited by: Allen , L. 76 – 82 . Proc. SPIE 1933
   Google Scholar
• Ramsey , P. W. , Chyle , J. J. , Kuhr , J. N. , Myers , P. S. , Weiss , M. and Groths , W. 1963 . “Infrared Temperature Sensing Systems for Automatic Fusion Welding,” . Welding Journal , 42 ( 8 ) : 337 – 346 .
   Google Scholar
• Richard , A. A. , Traub , A. C. and Vanzetti , R. 1980 . “Real‐time Control of Nugget Formation in Spot Welds,” . EUROMICRO Journal , 6 : 296 – 303 .
   Google Scholar
• Rider , G. 1983 . “Control of Weldpool Size and Position for Automatic and Robotic Welding,” . In Intelligent Robots: Third International Conference on Robot Vision and Sensory Controls RoViSeC3 Edited by: Casasent , D. P. 381 – 389 . Proc. SPIE 449
   Google Scholar
• Rider , G. “Measurement of Weld Pool Size by Self Scanned Photodiode Array,” . IEE Conference on Low Light and Thermal imaging Systems. London. IEE .
   Google Scholar
• Savage , W. F. , Nippes , E. F. and Wassel , F. A. 1978 . “Dynamic Contact Resistance of Series Spot Welds,” . Welding Journal , 57 ( 2 ) : 43 – 53 .
   Web of Science ®Google Scholar
• Slee , K. V. and More , G. R. 1973 . “A New Approach to Quality Assurance in Resistance Welding,” . Welding and Metal Fabrication , 41 ( 6 ) : 204
   Google Scholar
• Smith , C. J. 1974 . “Self‐adaptive Control of Penetration in a Tungsten Inert Gas Weld,” . In Advances in Welding Processes , Edited by: Needham , J. C. 272 – 277 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Snee , R. K. and Taylor , J. L. 1972 . “Infrared Monitoring of Resistance Spot Welding,” . Metal Construction and British Welding Journal , 4 ( 4 ) : 142 – 148 .
   Google Scholar
• Song , J.‐B. and Hardt , D. E. 1995 . “A Thermally Based Weld Pool Depth Estimator for Real‐time Control,” . In International Trends in Welding Research , Edited by: David , S. A. and Vitek , J. M. 975 – 980 . Metals Park, OH : ASM International .
   Google Scholar
• Song , J.‐B. and Hardt , D. E. 1993 . “Closed‐loop Control of Weld Pool Depth Using a Thermally Based Depth Estimator,” . Welding Journal , 72 ( 10 ) : 471 – 478 .
   Google Scholar
• Song , J.‐B. and Hardt , D. E. 1994 . “Dynamic Modeling and Adaptive Control of the Gas Metal Arc Welding Process,” . ASME Journal of Dynamic Systems, Measurement, and Control. , 116 ( 3 ) : 387 – 395 .
   Google Scholar
• Song , J.‐B. and Hardt , D. E. 1990 . “Estimation of Weld Bead Depth for In‐process Control,” . In Automation of Manufacturing Processes , Edited by: Danai , K. and Malkin , S. 39 – 45 . New York : ASME .
   Google Scholar
• Song , J.‐B. and Hardt , D. E. 1995 . “Simultaneous Control of Bead Width and Depth Geometry in Gas Metal Arc Welding,” . In International Trends in Welding Research , Edited by: David , S. A. and Vitek , J. M. 921 – 936 . Metals Park, OH : ASM International .
   Google Scholar
• Vroman , A. R. and Brandt , H. 1976 . “Feedback Control of GTA Welding Using Puddle Width Measurement,” . Welding Journal , 55 ( 9 ) : 742 – 749 .
   Web of Science ®Google Scholar
• Waller , B. N. and Knowlson , P. M. 1965 . “Electrode Separation Applied to Quality Control in Resistance Welding,” . Welding Journal , 44 ( 4 ) : 168 – 174 .
   Google Scholar
• Waller , B. N. “The BWRA Spot Weld Quality Monitor,” . Proc. 2nd Commonwealth Welding Conference .
   Google Scholar
• Wang , Y. and Chin , B. A. “On Line Sensing of Weld Penetration Using Infrared Thermography,” . Optical Techniques for Industrial Inspection, Proc. SPIE 665 . pp. 314 – 320 .
   Google Scholar
• White , D. R. , Carmein , J. A. , Jones , J. E. and Liu , K. 1995 . “ Integration of Process and Control Models for “Intelligent Control of Welding,” . In International Trends in Welding Research , Edited by: David , S. A. and Vitek , J. M. 883 – 887 . Metals Park, OH : ASM International .
   Google Scholar
• Wikle , H. C. III , Govardhan , S. M. and Chin , B. A. “Point Sensing Technique for Submerged Arc Welding,” . International Conference Proceedings on Modeling and Control of Joining Processes . Edited by: Zacharia , T. Miami, FL : American Welding Society .
   Google Scholar
• Williams , N. T. 1977 . “Use of Voltage Integration for Monitoring and Feedback,” . In Resistance Welding Control and Monitoring , 13 – 18 . Cambridge, , England : The Welding Institute .
   Google Scholar
• Invited paper
   Google Scholar
• Correspondence addressee
   Google Scholar