Reference
- ANSYS Incorporation. 2008. Manual of ANSYS 11. Houston, PA: ANSYS Incorporation.
- Balcı, M. A., and A. Yıldırım. 2011. “Analysis of Fractional Nonlinear Differential Equations Using the Homotopy Perturbation Method.” Zeitschrift für naturforschung A, 66a (1–2): 87–92.
- Banerjee, A., B. Bhattacharya, and A. K. Mallik. 2007. “Large Deflection of Cantilever Beams with Geometric Non-Linearity: Analytical and Numerical Approaches.” International Journal of Non-Linear Mechanics 43 (5): 366–376.
- Barari, A., M. Omidvar, D. D. Ganji, and A. T. Poor. 2008a. “An Approximate Solution for Boundary Value Problems in Structural Engineering and Fluid Mechanics.” Journal of Mathematical Problems in Engineering 2008 (394103): 1–13.
- Barari, A., M. Omidvar, A. R. Ghotbi, and D. D. Ganji. 2008b. “Application of Homotopy Perturbation Method and Variational Iteration Method to Nonlinear Oscillator Differential Equations.” Acta Applicandae Mathematicae 104 (2): 161–171.
- Belendez, T., M. Pérez-Polo, C. Neipp, and A. Beléndez. 2002. “Large and Small Deflections of a Cantilever Beam.” European Journal of Physics 23 (3): 371–379.
- Belendez, T., M. Pérez-Polo, C. Neipp, and A. Beléndez. 2005. “Numerical and Experimental Analysis of Large Deflections of Cantilever Beams under a Combined Load.” Physica Scripta 118 (2): 61–65.
- Catal, S. 2008. “Solution of Free Vibration Equations of Beam on Elastic Soil by Using Differential Transform Method.” Applied Mathematical Modeling 32 (9): 1744–1757.
- Chen, W. F. and T. Atsuta. 1976. Theory of Beam-Columns. New York: McGraw-Hill, Chap. 4.
- Dehghan, M. 2004. “The Use of Adomian Decomposition Method for Solving the One-Dimensional Parabolic Equation with Non-Local Boundary Specifications.” International Journal of Computer Mathematics 81 (1): 25–34.
- Dos Anjos, A. M. G., and P. B. Goncalves. 1996. Large Deflection Geometrically Non Linear Analysis of Arches and Beams. London: Imperial College Press . 69–76.
- Eren, I. 2008. “Determining Large Deflections in Rectangular Combined Loaded Cantilever Beams Made of Non-Linear Ludwick Type Material by Means of Different Arc Length Assumptions.” Sadhana 33 (1): 45–55.
- Fereidoon, A., M. Ghadimi, A. Barari, H. D. Kaliji, and G. Domairry. 2011. “Nonlinear Vibration of Oscillation Systems Using Frequency Amplitude Formulation.” Shock and Vibration 18: 1–10.
- Fouladi, F., E. Hosseinzadeh, A. Barari, and G. Domairry. 2010. “Highly Nonlinear Temperature Dependent Fin Analysis by Variational Iteration Method.” Journal of Heat Transfer Research 41 (2): 155–165.
- Gere, J. M., and S. P. Timoshenko. 1985. Mechanics of Materials. Boston, MA: PWS Engineering.
- Hamdan, M. N., and N. H. Shabaneh. 1997. “On the Large Amplitude Free Vibrations of a Restrained Uniform Beam Carrying an Intermediate Lumped Mass.” Journal of Sound and Vibration 199 (5): 711–736.
- Hashemi Kachapi, S. H. A., A. Barari, N. Tolou, and D. D. Ganji. 2009. “Solution of Strongly Nonlinear Oscillation Systems Using Variational Approach.” Journal of Applied Functional Analysis 4 (3): 528–535.
- He, J. H. 1999. “Variational Iteration Method: a Kind of Nonlinear Analytical Technique: Some Examples.” International Journal of Nonlinear Mechanics 34 (4): 699–708.
- He, J. H. 2007. “Variational Approach for Nonlinear Oscillators.” Chaos, Solitons and Fractals 34 (5): 1430.
- Herder, J. L., and F. P. A. Berg. 2000. Statically Balanced Compliant Mechanisms (SBCM’s), an Example and Prospects. Baltimore, MD: ASME.
- Howell, L. L. 2001. Compliant Mechanisms. New York: Wiley, Chap. 2.
- Ibsen, L. B., A. Barari, and A. Kimiaeifar. 2010. “Analysis of Highly Nonlinear Oscillation Systems Using He’s Max–Min Method and Comparison with Homotopy Analysis and Energy Balance Method.” Sadhana 35 (4): 433–448.
- Kimiaeifar, A. 2010. “An Analytical Approach to Investigate the Response and Stability of Van Der Pol-Mathieu-Duffing Oscillators under Different Excitation Functions.” Journal of Mathematical Methods in the Applied Sciences 33: 1571–1577.
- Kimiaeifar, A., A. R. Saidi, G. H. Bagheri, M. Rahimpour, and D. G. Domairry. 2009. “Analytical Solution for Van Der Pol-Duffing Oscillators.” Chaos, Solitons and Fractals 42 (5): 2660–2666.
- Kimiaeifar, A., A. R. Saidi, A. R. Sohouli, and D. D. Ganji. 2010. “Analysis of Modified Van Der Pol’s Oscillator Using He’s Parameter Expanding Method.” Current Applied Physics 10 (1): 279–283.
- Kimiaeifar, A., G. Domairry, S. R. Mohebpour, A. R. Sohouli, and A. G. Davodi. 2011. “Analytical Solution for Large Deflections of a Cantilever Beam under Nonconservative Load Based on Homotopy Analysis Method.” Journal of Numerical Methods for Partial Differential Equations 27 (3): 541–553.
- Lai, S. K., C. W. Lim, B. S. Wu, C. Wang, Q. C. Zeng, and X. F. He. 2009. “Newton-Harmonic Balancing Approach for Accurate Solutions to Nonlinear Cubic-Quintic Duffing Oscillators.” Applied Mathematics Modelling 33 (2): 852–866.
- Lazarov, B. S., M. Schevenels, and O. Sigmund. 2011. “Robust Design of Large-Displacement Compliant Mechanisms.” Mechanical Sciences 2 (2): 175–182.
- Lee, K. 2002. “Large Defections of Cantilever Beams of Non-Linear Elastic Material under a Combined Loading.” International Journal of Non-Linear Mechanics 37 (3): 439–443.
- Liao, S. J. 1992. “The Proposed Homotopy Analysis Technique for the Solution Of Nonlinear Problems.” PhD dissertation, Shanghai Jiao Tong University.
- Liao, S. J. 1995. “An Approximate Solution Technique Not Depending on Small Parameters: a Special Example.” International Journal of Non-Linear Mechanics 30 (3): 371–380.
- Liao, S. J. 1997. “Boundary Element Method for General Nonlinear Differential Operators.” Engineering Analysis with Boundary Elements 20 (2): 91–99.
- Liao, S. J. 2003. Beyond Perturbation: Introduction to the Homotopy Analysis Method. Boca Raton, FL: Chapman & Hall/CRC Press.
- Liao, S. J. 2004. “On the Homotopy Analysis Method for Nonlinear Problems.” Applied Mathematics and Computation 47 (2): 499–513.
- Liao, S. J., and K. F. Cheung. 2003. “Homotopy Analysis of Nonlinear Progressive Waves in Deep Water.” Journal of Engineering Mathematics 45 (2): 103–116.
- Maple incorporation, manual of maple 10, maple incorporation, 2005.
- Miansari, M. O., M. E. Miansari, A. Barari, and G. Domairry. 2010. “Analysis of Blasius Equation for Flat-Plate Flow with Infinite Boundary Value.” International Journal for Computational Methods in Engineering Science and Mechanics 11 (2): 79–84.
- Mirgolbabaei, H., A. Barari, L. B. Ibsen, and M. G. Esfahani. 2008. “Analytical Solution of Forced-Convective Boundary-Layer Flow over a Flat Plate.” Archives of Civil and Mechanical Engineering 10 (2): 41–51.
- Moghimi, M., A. Kimiaeifar, M. Rahimpour, and G. H. Bagheri. 2010. “Homotopy Analysis Method for Marangoni Mixed Convection Boundary Layer Flow.” Journal of Mechanical Engineering Science 224 (6): 1193–1202.
- Momeni, M., N. Jamshidi, A. Barari, and D. D. Ganji. 2010. “Application of he’s Energy Balance Method to Duffing Harmonic Oscillators.” International Journal of Computer Mathematics 88 (1): 135–144.
- Momeni, M., N. Jamshidi, A. Barari, and G. Domairry. 2011. “Numerical Analysis of Flow and Heat Transfer of a Viscoelastic Fluid over a Stretching Sheet.” International Journal of Numerical Methods for Heat and Fluid Flow 21 (2): 206–218.
- Morsch, F. M., N. Tolou, and J. L. Herder. 2009. Comparison of Methods for Large Deflection Analysis of a Cantilever Beam under Free End Point Load Cases. San Diego, CA: ASME.
- Nayfeh, A. H. 1973. Perturbation Methods. New York: John Wiley & Sons.
- Okuizumi, N., and K. Kimura. 2004. “Multiple Time Scale Analysis of Hysteretic Systems Subjected to Harmonic Excitation.” Journal of Sound and Vibration 272 (3–5): 675–701.
- Omidvar, M., A. Barari, M. Momeni, and D. D. Ganji. 2010. “New Class of Solutions for Water Infiltration Problems in Unsaturated Soils.” Geomechanics and Geoengineering 5 (2): 127–135.
- Ozis, T., and A. Yildirim. 2007. “Determination of Periodic Solution for a u1/3 Force by He’s Modified Lindstedt–Poincaré Method.” Journal of Sound and Vibration 301 (1–2): 415.
- Pei, X., and J. Yu. 2011. “ADLIF: A New Large-Displacement Beam-Based Flexure Joint.” Mechanical Sciences 2 (2): 183–188.
- Rahman, M. A., M. T. Siddiqui, and M. A. Kowser. 2007. “Design and Non-Linear Analysis of a Parabolic Leaf Spring.” Journal of Mechanical Engineering 37: 47–51.
- Ramos, J. I. 2009. “An Artificial Parameter-Linstedt-Poincaré Method for Oscillators with Smooth Odd Nonlinearities.” Chaos, Solitons and Fractals 41 (1): 380–393.
- Rao, B. N., and G. V. Rao. 1998. “Large Deflection of a Cantilever Beam Subject to a Rotational Distributed Loading.” Forschung Im Ingenieurwesen 55 (4): 116–120.
- Richard, M., and R. Clavel. 2011. “Concept of Modular Flexure-Based Mechanisms for Ultra-High Precision Robot Design.” Mechanical Sciences 2 (1): 99–107.
- Sato, K. 1959. “Large Deflection of a Circular Cantilever Beam with Uniformly Distributed Load.” Archive of Applied Mechanics 27 (3): 195–200.
- Saxena, A., and S. N. Kramer. 1998. “A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments.” ASME Journal of Mechanical Design 120 (3): 392–400.
- Sfahani, M. G., A. Barari, M. Omidvar, S. S. Ganji, and G. Domairry. 2011. “Dynamic Response of Inextensible Beams by Improved Energy Balance Method.” Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics 225 (1): 1464–4193.
- Shatnawi, A. S., and S. Al-Sadder. 2007. “Exact Large Deflection Analysis of Non-Prismatic Cantilever Beams of Nonlinear Bimodulus Material Subjected to Tip Moment.” Journal of Reinforced Plastics and Composites 26 (12): 1253–1261.
- Simi, M., N. Tolou, P. Valdastri, J. L. Herder, A. Menciassi, and P. Dario. 2012. “Modeling of a Compliant Joint in a Magnetic Levitation System for an Endoscopic Camera.” Mechanical Sciences 3 (1): 5–14.
- Tolou, N. and H. L. Herder. 2009. A Semi Analytical Approach to Large Deflections in Compliant Beams Under Point Load. Journal of Mathematical Problems in Engineering 2009 (910896): 1–13.
- Tolou, N., S. H. A. Hashemi Kachapi, A. Barari, and D. D. Ganji. 2009. “Analytical Investigation of Strongly Nonlinear Normal Mode Using Homotopy Perturbation Method and He’s Variational Method.” Journal of Applied Functional Analysis 4 (4): 682–690.
- Tolou, N., et al. 2011. “Analytical Method for Determination of Young’s Modulus of Large Deflection Carbon Nanotube.” International Journal of Nonlinear Sciences and Numerical Simulation 12 (1–8): 51–58.
- Wang, J., J. K. Chen, and S. Liao. 2008. “An Explicit Solution of the Large Deformation of a Cantilever Beam under Point Load at the Free Tip.” Journal of Computational and Applied Mathematics 212 (2): 320–330.
- Wang, S. Q., and J. H. He. 2008. “Nonlinear Oscillator with Discontinuity by Parameter-Expanding Method.” Chaos, Solitons & Fractals 35 (4): 688–691.
- Yıldırım, A., and S. A. Sezer. 2010. “Non-Perturbative Solution of the MHD Flow over a Non-Linear Stretching Sheet by HPM-Padé Technique.” Zeitschrift für Naturforschung A 65 (12): 1106–1110.
- Zhiming, Y., and Y. Kaiyuan. 1989. “Exact Solution for Finite Deformation Problems of Cantilever Beam with Variable Section under the Action of Arbitrary Transverse Loads.” Acta Mechanica Sinica 5 (2): 152–158.