References
- Adalarasan, R., and A. Shanmuga Sundaram. 2016. “Study of Friction Welding Characteristics of Al/SiC Composite and Application of Grey-based TOPSIS.” Journal of the Chinese Institute of Engineers 39 (4): 1–9. doi:10.1080/02533839.2015.1125792.
- Adalarasan, R., and A. S. Sundaram. 2015. “Parameter Design and Analysis in Continuous Drive Friction Welding of Al6061/SiCp composites.” Journal of Mechanical Science and Technology 29 (2): 769–776. doi:10.1007/s12206-015-0138-6.
- Azadeh, A., H. Kor, and S. M. Hatefi. 2011. “A Hybrid Genetic Algorithm-TOPSIS-computer Simulation Approach for Optimum Operator Assignment in Cellular Manufacturing Systems.” Journal of the Chinese Institute of Engineers 34 (1): 57–74. doi:10.1080/02533839.2011.552966.
- Babu, P. D., G. Buvanashekaran, and K. R. Balasubramanian. 2012. “Experimental Studies on the Microstructure and Hardness of Laser Transformation Hardening of Low Alloy Steel.” Transactions of the Canadian Society for Mechanical Engineering 36 (3): 241–257.
- Babu, P. D., G. Buvanashekaran, and K. R. Balasubramanian. 2013. “Experimental Investigation of Laser Transformation Hardening of Low Alloy Steel Using Response Surface Methodology.” The International Journal of Advanced Manufacturing Technology 67 (5): 1883–1897. doi:10.1007/s00170-012-4616-z.
- Barry, J., G. Byrne, and D. Lennon. 2001. “Observations on Chip Formation and Acoustic Emission in Machining Ti–6Al–4V alloy.” International Journal of Machine Tools and Manufacture 41 (7): 1055–1070. doi:10.1016/S0890-6955(00)00096-1.
- Chien, C. H., W. B. Lin, and T. Chen. 2011. “Optimal FSW Process Parameters for Aluminum Alloys AA5083.” Journal of the Chinese Institute of Engineers 34 (1): 99–105. doi:10.1080/02533839.2011.553024.
- Cho, N., and J. Tu. 2001. “Roundness Modeling of Machined Parts for Tolerance Analysis.” Precision Engineering 25 (1): 35–47. doi:10.1016/S0141-6359(00)00053-2.
- Dewangan, S., S. Gangopadhyay, and C. K. Biswas. 2015. “Study of Surface Integrity and Dimensional Accuracy in EDM Using Fuzzy TOPSIS and Sensitivity Analysis.” Measurement 63: 364–376. doi:10.1016/j.measurement.2014.11.025.
- Dhar, N. R., M. W. Islam, S. Islam, and M. A. H. Mithu. 2006. “The Influence of Minimum Quantity of Lubrication (MQL) on Cutting Temperature, Chip and Dimensional Accuracy in Turning AISI-1040 Steel.” Journal of Materials Processing Technology 171 (1): 93–99. doi:10.1016/j.jmatprotec.2005.06.047.
- Gadakh, V. S. 2012. “Parametric Optimization of Wire Electrical Discharge Machining Using TOPSIS Method.” Advances in production Engineering & Management 7 (3): 157–164. doi:10.1473/apem2012.3.138.
- Gauri, S. K., R. Chakravorty, and S. Chakraborty. 2011. “Optimization of Correlated Multiple Responses of Ultrasonic Machining (USM) Process.” The International Journal of Advanced Manufacturing Technology 53 (9): 1115–1127. doi:10.1007/s00170-010-2905-y.
- Gok, A. 2012. “A New Approach to Minimization of The Surface Roughness and Cutting Force via Fuzzy TOPSIS, Multi-objective Grey Design and RSA.” Measurement 70: 100–109. doi:10.1016/j.measurement.2015.03.037.
- Kilic, B., J. A. Aguirre-Cruz, and S. Raman. 2007. “Inspection of the Cylindrical Surface Feature After Turning Using Coordinate Metrology.” International Journal of Machine Tools and Manufacture 47 (12–13): 1893–1903. doi:10.1016/j.ijmachtools.2007.03.007.
- Komanduri, R., and Z. B. Hou. 2002. “On the Thermoplastic Shear Instability in the Machining of a Titanium Alloy (Ti–6Al–4V).” Metallurgical and Materials Transactions A 33 (9): 2995–3010. doi:10.1007/s11661-002-0284-1.
- Koyee, R. D., R. Eisseler, and S. Schmauder. 2014. “Application of Taguchi coupled Fuzzy Multi Attribute Decision Making (FMADM) for Optimizing Surface Quality in Turning Austenitic and Duplex Stainless Steels.” Measurement 58: 375–386. doi:10.1016/j.measurement.2014.09.015.
- Lan, T. S. 2009. “Taguchi Optimization of Multi-objective CNC Machining Using TOPSIS.” Information Technology Journal 8 (6): 917–922. doi:10.3923/itj.2009.917.922.
- Liu, S., Z. Guo, and Z. Chen. 2016. “Finite-element Analysis and Structural Optimization Design Study for Cradle Seat of CNC Machine Tool.” Journal of the Chinese Institute of Engineers 39 (3): 345–352. doi:10.1080/02533839.2015.1112248.
- Marcos-Bárcena, M., M. A. Sebastián-Pérez, J. P. Contreras-Samper, M. Sánchez-Carrilero, M. Sánchez-López, and J. M. Sanchez-Sola. 2005. “Study of Roundness on Cylindrical Bars Turned of Aluminium–copper Alloys UNS A92024.” Journal of Materials Processing Technology 162–163: 644–648. doi:10.1016/j.jmatprotec.2005.02.061.
- Mustafa, A. Y., and T. Ali. 2011. “Determination and Optimization of the Effect of Cutting Parameters and Work Piece Length on the Geometric Tolerances and Surface Roughness in Turning Operation.” International Journal of the Physical Sciences 6 (5): 1074–1084. doi:10.5897/IJPS11.130.
- Peng, J. P., W. C. Yeh, T. C. Lai, and C. B. Hsu. 2015. “The Incorporation of the Taguchi and the VIKOR Methods to Optimize Multi-response Problems in Intuitionistic Fuzzy Environments.” Journal of the Chinese Institute of Engineers 38 (7): 897–907. doi:10.1080/02533839.2015.1037994.
- Rafai, N. H., and M. N. Islam. 2009. “An Investigation into Dimensional Accuracy and Surface finish Achievable in Dry Turning.” Machining Science and Technology 13 (4): 571–589. doi:10.1080/10910340903451456.
- Rao, R. V. 2006. “Machinability Evaluation of Work Materials Using a Combined Multiple Attribute Decision-making Method.” The International Journal of Advanced Manufacturing Technology 28 (3): 221–227. doi:10.1007/s00170-004-2348-4.
- Senthil, P., S. Vinodh, and A. K. Singh. 2014. “Parametric Optimisation of EDM on Al-Cu/TiB2 In-situ Metal Matrix Composites Using TOPSIS Method.” International Journal of Machining and Machinability of Materials 16 (1): 80–94. doi:10.1504/IJMMM.2014.063922.
- Singh, A., S. Datta, and S. S. Mahapatra. 2011. “Application of TOPSIS in the Taguchi Method for Optimal Machining Parameter Selection.” Journal for Manufacturing Science and Production 11 (1–3): 49–60. doi:10.1515/jmsp.2011.002.
- Thirumalai, R., and J. S. Senthilkumaar. 2013. “Multi-criteria Decision Making in the Selection of Machining Parameters for Inconel 718.” Journal of Mechanical Science and Technology 27 (4): 1109–1116. doi:10.1007/s12206-013-0215-7.
- Tiwary, A. P., B. B. Pradhan, and B. Bhattacharyya. 2014. “Application of Multi-criteria Decision making Methods for Selection of Micro-EDM Process Parameters.” Advances in Manufacturing 2 (3): 251–258. doi:10.1007/s40436-013-0050-1.
- Tzeng, C. J., Y. H. Lin, Y. K. Yang, and M. C. Jeng. 2009. “Optimization of Turning Operations with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis.” Journal of Materials Processing Technology 209 (6): 2753–2759. doi:10.1016/j.jmatprotec.2008.06.046.
- Yang, D. Y., and Y. C. Chiang. 2014. “An Evolutionary Algorithm for Optimizing the Machine Repair Problem Under a Threshold Recovery Policy.” Journal of the Chinese Institute of Engineers 37 (2): 224–231. doi:10.1080/02533839.2012.757050.