References
- Akyuz, I. H., E. Yolacan, H. M. Ertunc, and Z. Bingul. 2011. “PID and State Feedback Control of a Single-link Flexible Joint Robot Manipulator.” In Proceedings of the 2011 IEEE International Conference on Mechatronics, Istanbul, Turkey, 13–15 April 2011: 409–414. New York: IEEE.
- Atia, K. R. 2013. “A New Variable Structure Controller for Robot Manipulators with a Nonlinear PID Sliding Surface.” Robotica 31 (4): 503–510. doi: 10.1017/S0263574712000513.
- Chacón, J., M. Beschi, J. Sánchez, A. Visioli, and S. Dormido. 2014. “Experimental Analysis of a Remote Event-based PID Controller in a Flexible Link System.” In Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, Barcelona, Spain, 16–19 September 2014: 1–6. New York: IEEE.
- Chen, C. H., and H. P. Huang. 2013. “Pose Estimation for Autonomous Grasping with a Robotic Arm System.” Journal of the Chinese Institute of Engineers 36 (5): 638–646. doi: 10.1080/02533839.2012.734563.
- De Luca, A., P. Lucibello, and G. Ulivi. 1989. “Inversion Techniques for Trajectory Control of Flexible Robot Arms.” Journal of Robotic Systems 6 (4): 325–344. doi: 10.1002/rob.4620060403.
- Gadsden, S. A., and M. AlShabi. 2015. “A Comparison of Vibration Control Strategies for a Flexible-link Robot Arm.” In Proceedings of 2015 10th International Symposium on Mechatronics and its Applications, Sharjah, United Arab Emirates, 8–10 December 2015: 1–5. New York: IEEE.
- Ge, S. S., T. H. Lee, and G. Zhu. 1998. “Improving Regulation of a Single-link Flexible Manipulator with Strain Feedback.” IEEE Transactions on Robotics and Automation 14 (1): 179–185. doi: 10.1109/70.660869.
- Goodson, R. E. 1970. “Distributed System Simulation Using Infinite Product Expansions.” Simulation 15 (6): 255–263. doi: 10.1177/003754977001500603.
- Ho, M. T., and Y. W. Tu. 2006. “Position Control of a Single-link Flexible Manipulator Using H∞-based PID Control.” IEE Proceedings – Control Theory and Applications 153 (5): 615–622. doi: 10.1049/ip-cta:20050070.
- Hsu, S. H., and L. C. Fu. 2006. “A Fully Adaptive Decentralized Control of Robot Manipulators.” Automatica 42 (10): 1761–1767. doi: 10.1016/j.automatica.2006.05.012.
- Kikuuwe, R. 2013. “Alternative Proofs of Four Stability Properties of Rigid-link Manipulators Under PID Position Control.” Robotica 31 (1): 113–122. doi: 10.1017/S0263574712000136.
- Lenz, K., H. Özbay, A. Tannenbaum, J. Turi, and B. Morton. 1991. “Frequency Domain Analysis and Robust Control Design for an Ideal Flexible Beam.” Automatica 27 (6): 947–961. doi: 10.1016/0005-1098(91)90130-T.10.1016/0005-1098(91)90130-T
- Liu, L. Y., and K. Yuan. 2003. “Noncollocated Passivity-based PD Control of a Single-link Flexible Manipulator.” Robotica 21 (2): 117–135. doi: 10.1017/S0263574702004538.
- Lozano, R., B. Brogliato, O. Egeland, and B. Maschke. 2000. Dissipative Systems Analysis and Control: Theory and Application. London: Springer-Verlag.10.1007/978-1-4471-3668-2
- Luo, Z. H. 1993. “Direct Strain Feedback Control of Flexible Robot Arms: New Theoretical and Experimental Results.” IEEE Transactions on Automatic Control 38 (11): 1610–1622. doi: 10.1109/9.262031.
- Luo, Z. H., and D. X. Feng. 1999. “Nonlinear Torque Control of a Single-link Flexible Robot.” Journal of Robotic Systems 16 (1): 25–35. doi: 10.1002/(SICI)1097-4563.
- Luo, Z. H., and B. Z. Guo. 1995. “Further Theoretical Results on Direct Strain Feedback Control of Flexible Robot Arms.” IEEE Transactions on Automatic Control 40 (4): 747–751. doi: 10.1109/9.376095.
- Md Zain, B. A., M. O. Tokhi, and S. F. Toha. 2009. “PID-based Control of a Single-link Flexible Manipulator in Vertical Motion with Genetic Optimisation.” In Proceedings of Third UKSim European Symposium on Computer Modeling and Simulation, Athens, Greece, 25–27 November 2009: 355–360. New York: IEEE.
- Morgül, Ö. 2011. “On the Strain Feedback Control of a Flexible Robot Arm.” In Proceedings of the 2011 American Control Conference, San Francisco, CA, USA, 29 June 2011–1 July 2011: 1795–1800. New York: IEEE.
- Sakawa, Y., F. Matsuno, and S. Fukushima. 1985. “Modeling and Feedback Control of a Flexible Arm.” Journal of Robotic Systems 2 (4): 453–472. doi: 10.1002/rob.4620020409.
- Solis, J. F. P., G. S. Navarro, and R. C. Linares. 2007. “On the Analysis and Control of a Flexible Link Robot.” In Proceedings of the 2007. 4th International Conference on Electrical and Electronics Engineering, Mexico City, Mexico, 5–7 September 2007: 298–301. New York: IEEE.
- Spector, V. A., and H. Flashner. 1990. “Modeling and Design Implications of Noncollocated Control in Flexible Systems.” Journal of Dynamic Systems, Measurement, and Control 112 (2): 186–193. doi: 10.1115/1.2896125.
- Takahashi, K., and M. Sasaki. 2010. “Remarks on Tip Angular Position Control of Single-link Flexible Robot Arm Using Modified Lyapunov Function.” In Proceedings of the 2010 International Conference on Mechatronics and Automation, Xi’an, China, 4–7 August 2010: 1024–1029. New York: IEEE.
- Tumari, M. Z. M., M. A. Ahmad, M. S. Saealal, M. A. Zawawi, Z. Mohamed, and N. M. Yusop. 2011. “The Direct Strain Feedback with PID Control Approach for a Flexible Manipulator: Experimental Results.” In Proceedings of 2011 11th International Conference on Control, Automation and Systems, Gyeonggi-do, Korea, 26–29 October 2011: 7–12. New York: IEEE.
- Wang, R. J., H. P. Huang, P. T. Lee, and H. F. Liao. 2013. “A Vertically Intersected Dual-axis Modularized Reconfigurable Actuator: Design and Application for a Six-axis Humanoid Robot Arm.” Journal of the Chinese Institute of Engineers 36 (4): 530–541. doi: 10.1080/02533839.2012.731891.
- Wang, D., and M. Vidyasagar. 1992. “Passive Control of a Stiff Flexible Link: Communication.” The International Journal of Robotics Research 11 (6): 572–578. doi: 10.1177/027836499201100606.
- Zamani, M., N. Sadati, and M. K. Ghartemani. 2009. “Design of an H∞ PID Controller Using Particle Swarm Optimization.” International Journal of Control, Automation and Systems 7 (2): 273–280. doi: 10.1007/s12555-009-0213-9.