Modeling analysis and fabrication of MEMS capacitive differential pressure sensor for altimeter application

References

• Andrey, B., and Z. Babak. 2002. “Silicon Wafer Bonding with an Insulator Interlayer Using RF Dielectric Heating.” In Proceedings of 15th IEEE International Conference on MEMS, Las Vegas, NV, USA, 24 January 2002: 419–422. New York: IEEE.
   Google Scholar
• Bistue, G., J. G. Elizalde, S. Garcia-Alonso, E. Castano, F. J. Gracia, and A. Garcia-Alonso. 1997. “Design Tool for Pressure Micro Sensor Based on FEM Simulation.” Sensors and Actuators A: Physical 62 (1–3): 591–594. doi:10.1016/S0924-4247(97)01598-7.
   Web of Science ®Google Scholar
• Chavan, A. V., and K. D. Wise. 2001. “Batch Processing of Vacuum Sealed Capacitive Pressure Sensor.” Journal of Microelectromechanical System 10 (4): 580–588. doi:10.1019/84.967381.
   Web of Science ®Google Scholar
• Eswaran, P., and S. Malarvizhi. 2012a. “Simulation Analysis of MEMS Based Capacitive Differential Pressure Sensor for Aircraft Application.” Advanced Materials Research 403: 4152–4156. doi:10.4028/www.scientific.net/AMR.403-408.4152.
   Google Scholar
• Eswaran, P., and S. Malarvizhi. 2012b. “Design Analysis of MEMS Capacitive Differential Pressure Sensor for Aircraft Altimeter.” International Journal of Applied Physics and Mathematics 2 (1): 14–20. doi:10.7763/IJAPM.2012.V2.45.
   Google Scholar
• Eswaran, P., and S. Malarvizhi. 2012c. “Sensitivity Analysis on MEMS Capacitive Differential Pressure Sensor with Bossed Diaphragm Membrane.” In IEEE proceedings of International Conference on Devices, Circuits and Systems (ICDCS), Karunya University, Coimbatore, India, 15–16 March 2012: 705–709. New York: IEEE.
   Google Scholar
• Eswaran, P., and S. Malarvizhi. 2013a. “MEMS Capacitive Pressure Sensors: A Review on Recent Development and Prospective.” International Journal of Engineering and Technology 5 (3): 2734–2746.
   Google Scholar
• Eswaran, P., and S. Malarvizhi. 2013b. “Modeling and Analysis of High Sensitive MEMS Capacitive Differential Pressure Sensor with Polyimide Diaphragm.” Advanced Science Letter 19 (12): 3449–3453. doi:10.1166/asl.2013.5213.
   Google Scholar
• Eswaran, P., and S. Malarvizhi. 2015. “Modeling and Analysis of MEMS Capacitive Differential Pressure Sensor Structure for Altimeter.” Microsystem Technologies Micro and Nanosystems Information Storage and Processing Systems 23 (5): 1343–1349. doi:10.1007/s00542-015-2756-4.
   Web of Science ®Google Scholar
• Guo, S., H. Eriksen, K. Childress, A. Fink, and M. Hoffman. 2009. “High Temperature Smart-cut SOI Pressure Sensor.” Sensors and Actuators A: Physical 154 (2): 255–260. doi:10.1016/j.sna.2009.03.011.
   Web of Science ®Google Scholar
• Han, J., and M. A. Shannon. 2009. “Smooth Contact Capacitive Pressure Sensors in Touch and Peeling Mode Operation.” IEEE Sensors Journal 9 (3): 199–209. doi:10.1109/JSEN.2008.2011090.
   Web of Science ®Google Scholar
• He, F., Q. A. Huang, and M. Qin. 2007. “A Silicon Directly Bonded Capacitive Absolute Pressure Sensor.” Sensors and Actuators A: Physical 135 (2): 507–514. doi:10.1016/j.sna.2006.09.022.
   Web of Science ®Google Scholar
• Kapton. 2016. Technical Data sheet Du Pont TM Kapton. Dupont. Accessed November 20. http://www2.dupont.com/Kapton/en_US/assets/downloads/pdf/HN_datasheet.pdf.
   Google Scholar
• Kirt, W., and S. M. Richard. 1996. “Etch Rate for Micromachining Processing.” Journal of Microelectromechanical System 5 (4): 256–269. doi:10.1109/84.546406.
   Web of Science ®Google Scholar
• Lee, Y. S., and K. D. Wise. 1982. “A Batch-fabricated Silicon Capacitive Pressure Transducer with Low Temperature Sensitivity.” IEEE Transactions on Electron Devices 29 (1): 42–48. doi:10.1109/T-ED.1982.20656.
   Web of Science ®Google Scholar
• Lin, L., and W. Yun. 1998. “MEMS Pressure Sensors for Aerospace Applications.” In IEEE proceedings of Aerospace Conference, Aspen Snowmass, USA, 28, March 1998: 429–436. New York: IEEE.
   Google Scholar
• Liu, C. 2012. Foundation of MEMS. 2nd ed. Chennai: Pearson Education Limited.
   Google Scholar
• NASA. 1976. US Standard Atmosphere. Report No. NASA-TM-X-74335. Washington, DC: U.S. NASA.
   Google Scholar
• Polyimide Adhesive. 2016. HD 3007 Polyimide Adhesive Process Guide. HD Micro System. Accessed November 20. http://www.dupont.com/Packaging_and_Circuits/en_US/assets/downloads/pdf/HD-3007_ProceedingsessGuide.pdf.
   Google Scholar
• Pramanik, C., T. Islam, and H. Saha. 2006. “Temperature Compensation of Piezoresistive Micro-machined Porous Silicon Pressure Sensor by ANN.” Journal of Microelectronics Reliability 46: 343–351. doi:10.1016/j.microrel.2005.04.008.
   Web of Science ®Google Scholar
• Wang, Q. 1999. “Modeling of Touch Mode Capacitive Sensors and Diaphragms.” Sensors and Actuators A: Physical 75 (3): 230–241. doi:10.1016/S0924-4247(99)00068-0.
   Web of Science ®Google Scholar
• Young, D. J., J. Du, C. A. Zorman, and W. H. Ko. 2004. “High-temperature Single-crystal 3C-SiC Capacitive Pressure Sensor.” IEEE Sensors Journal 4 (4): 464–469. doi:10.1109/JSEN.2004.830301.
   Web of Science ®Google Scholar