References
- Dia, Z., X. Huang, Z. Li, and H. Xing. 2016. “Synchronized Pose Adjustment Method for Automatic Docking of Large Aircraft Components.” Aviation Manufacturing Technology 2016 (4): 52–56. doi:https://doi.org/10.16080/j.1671-833x.2016.04.052.
- Galante, J., J. Van Eepoel, M. Strube, N. Gill, M. Gonzalez, A. Hyslop, and B. Patrick. 2013. “Pose Measurement Performance of the Argon Relative Navigation Sensor Suite in Simulated Flight Conditions.” Occupational Ergonomics 7 (1): 27–42. doi:https://doi.org/10.2514/6.2012-4927.
- Guo, F., Z. Wang, Y. Kang, X. Li, Z. Chang, and B. Wang. 2016. “Positioning Method and Assembly Precision for Aircraft Wing Skin.” in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (2): 130–135. doi:https://doi.org/10.1177/0954405416640168.
- Hou, Z., X. Liang, and W. Zhou. 2010. “Research on Integrated Control Technology for Automatic Docking of Aircraft Major Components.” Aviation Manufacturing Technology 23: 93–96+120. doi:https://doi.org/10.3969/j.1671-833X.2010.23.019.
- Lude, C., J. Fan, G. Han, and G. Ma. 2013. “A Review of Particle Filtering.” Astronomical Research and Technology 10 (4): 397–409. doi:https://doi.org/10.3969/j.1672-7673.2013.04.011.
- Marguet, B., and B. Ribere. 2003. “Measurement-Assisted Assembly Applications on Airbus Final Assembly Lines.” Sae Transactions 112 (1): 372–375. doi:https://doi.org/10.4271/2003-01-2950.
- Mei, Z., and Y. Fan. 2009. “Component Docking Flexible Assembly Technology Based on Laser Tracking and Positioning.” Journal of Beijing University of Aeronautics and Astronautics 35 (1): 65–69. doi:https://doi.org/10.13700/j.bh.1001-5965.2009.01.010.
- Mosqueira, G., J. Apetz, K.M. Santos, E. Villani, R. Suterio,and, and L.G. Trabasso. 2012. “Analysis of the Indoor GPS System as Feedback for the Robotic Alignment of Fuselages Using Laser Radar Measurements as Comparison.” Robotics and Computer Integrated Manufacturing 28 (6): 700–709. doi:https://doi.org/10.1016/j.rcim.2012.03.004.
- Tang, J., Z. Wang, and X. Zhang. 2011. “Line Detection Technology Based on Hough Transform.” Science and Technology Information 14: 33+35.
- Vichare, P., O. Martin, and J. Jamshidi. 2014. “Dimensional Management for Aerospace Assemblies: Framework Implementation with Case-Based Scenarios for Simulation and Measurement of In-Process Assembly Variations.” International Journal of Advanced Manufacturing Technology 70 (1–4): 215–225. doi:https://doi.org/10.1007/s00170-013-5262-9.
- Wang, Q., S. H. Fan, L. Cheng, J. X. Li,and, and Y. L. Ke. 2018. “Interference Detection Method for Wng-Fuselage Junction Joint Based on Measured Data.” Journal of Zhejiang University (Engineering Edition) 52 (2): 207–216+232. doi:https://doi.org/10.3785/j.1008-973X.2018.02.001.
- Yao, L., W. Fang, and X. Zhu. 2018. “Design and Implementation of Automatic Docking Measurement and Control System for Aircraft Wing-Fuselage.” Instrument Technology9: 9–12.
- Zhang, H. 2014. “Support Point Optimization of Large Components Based on Pose Adjustment of Parallel Mechanisms.” Computer Integrated Manufacturing System 20 (10): 2419–2425. doi:https://doi.org/10.13196/j.cims.2014.10.011.