References
- Chan, T.C., Y.P. Hong, Y.C. Wang, and S.H. Wu. 2019a. “Optimization Design of the Composite Structure of Linear Motor Machine Tools.” Journal of Mechanical Engineering and Automation 9: 219–224. doi:https://doi.org/10.17265/2159-5275/2019.07.001.
- Chan, T.C., S.H. Wu, Y.Z. Lin, J.Y. Chen, and B.Y. Lee. 2019b. “Structural Analysis and Dynamic Testing of Mini Five -axis Machine Tools.” Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science 38 (1): 3301–3308. doi:https://doi.org/10.1007/978-3-030-20131-9_326.
- Chan, Y.J., and J.W. Huang. 2018. “Time-Domain Operational Modal Analysis in Machine Tools: Optimal Parameters and Practical Issues.” International Journal of Precision Engineering and Manufacturing 19: 889–897. doi:https://doi.org/10.1007/s12541-018-0105-0.
- Eman, K.F., and K.J. Kim. 1983. “Modal Analysis of Machine Tool Structures Based on Experimental Data.” Journal of Manufacturing Science and Engineering 105 (4): 282–287. doi:https://doi.org/10.1115/1.3185900.
- Ericson, T.M., and R.G. Parker. 2013. “Planetary Gear Modal Vibration Experiments and Correlation against Lumped-Parameter and Finite Element Models.” Journal of Sound and Vibration 332 (9): 2350–2375. doi:https://doi.org/10.1016/j.jsv.2012.11.004.
- Fujishima, M., K. Ohno, S. Nishikawa, K. Nishimura, M. Sakamoto, and K. Kawai. 2016. “Study of Sensing Technologies for Machine Tools.” CIRP Journal of Manufacturing Science and Technology 14: 71–75. doi:https://doi.org/10.1016/j.cirpj.2016.05.005.
- Gegg, B.C., S.C.S. Suh, and A.C.J. Luo. 2010. “Modeling and Theory of Intermittent Motions in a Machine Tool with a Friction Boundary.” Journal of Manufacturing Science and Engineering 132 (4). doi:https://doi.org/10.1115/1.4001643.
- Genta, G. 1988. “Whirling of Unsymmetrical Rotors: A Finite Element Approach Based on Complex Coordinates.” Journal of Sound and Vibration 124: 27–53. doi:https://doi.org/10.1016/S0022-460X(88)81404-4.
- Li, Y., J. Wang, X.J. Liu, and P.L. Wang. 2010. “Dynamic Performance Comparison and Counterweight Optimization of Two 3-DOF Parallel Manipulators for a New Hybrid Machine Tool.” Mechanism and Machine Theory 45: 1668–1680. doi:https://doi.org/10.1016/j.mechmachtheory.2010.06.009.
- Liu, H., M. Chen, B. Yu, and Z. Fang. 2016. “Configuration Design and Accuracy Analysis of a Novel Magnetorheological Finishing Machine Tool for Concave Surfaces with Small Radius of Curvature.” Journal of Mechanical Science and Technology 30: 3301–3311. doi:https://doi.org/10.1007/s12206-016-0639-y.
- Liu, S., Z. Guo, and Z. Chen. 2016. “Finite-Element Analysis and Structural Optimization Design Study for Cradle Seat of CNC Machine Tool.” Journal of the Chinese Institute of Engineers 39 (3): 1–8. doi:https://doi.org/10.1080/02533839.2015.1112248.
- Liu, S., and M. Lin. 2019. “Thermal–Mechanical Coupling Analysis and Experimental Study on CNC Machine Tool Feed Mechanism.” International Journal of Precision Engineering and Manufacturing 20: 993–1006. doi:https://doi.org/10.1007/s12541-019-00069-1.
- Ohta, H., and E. Hayashi. 2000. “Vibration of Linear Guideway Type Recirculating Linear Ball Bearings.” Journal of Sound and Vibration 235 (5): 847–861. doi:https://doi.org/10.1006/jsvi.2000.2950.
- Orlowski, K.A., P. Dudek, D. Chuchala, W. Blacharski, and T. Przybylinski. 2020. “The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties.” Applied Science 10: 7386. doi:https://doi.org/10.3390/app10207386.
- Shin, Y. C., K. F. Eman, and S. M. Wu. 1989. “Experimental Complex Modal Analysis of Machine Tool Structures.” Journal of Manufacturing Science and Engineering 111: 116–124. doi:https://doi.org/10.1115/1.3188740.
- Simon, V. 2009. “Influence of Machine Tool Setting Parameters on EHD Lubrication in Hypoid Gears.” Mechanism and Machine Theory 44 (5): 923–937. doi:https://doi.org/10.1016/j.mechmachtheory.2008.06.005.
- Tian, W., G. Yang, L. Wang, F. Yin, and W. Gao. 2018. “The Application of a Regularization Method to the Estimation of Geometric Errors of a Three-Axis Machine Tool Using a Double Ball Bar.” Journal of Mechanical Science and Technology 32: 4871–4881. doi:https://doi.org/10.1007/s12206-018-0935-9.
- Țîțu, A.M., A.V. Sandu, A.B. Pop, Ș. Țîțu, D.N. Frățilă, C. Ceocea, and A. Boroiu. 2020. “Design of Experiment in the Milling Process of Aluminum Alloys in the Aerospace Industry.” Applied Sciences 10: 6951. doi:https://doi.org/10.3390/app10196951.
- Wang, J., C. Cheng, and H. Li. 2020. “A Novel Approach to Separate Geometric Error of the Rotary Axis of Multi-Axis Machine Tool Using Laser Tracker.” International Journal of Precision Engineering and Manufacturing 21: 983–993. doi:https://doi.org/10.1007/s12541-020-00329-5.
- Wang, S., S. Hisayoshi, and O. H. Masanori. 1984. “New Approaches to the Modal Analysis for Machine Tool Structure.” Journal of Manufacturing Science and Engineering 106 (1): 40–47. doi:https://doi.org/10.1115/1.3185909.
- Whalley, R., A.A. Abdul-Ameer, and K.M. Ebrahimi. 2011. “The Axes Response and Resonance Identification for a Machine Tool.” Mechanism and Machine Theory 46 (8): 1171–1192. doi:https://doi.org/10.1016/j.mechmachtheory.2011.02.012.
- Wu, J., J. Wang, L. Wang, T. Li, and Z. You. 2009. “Study on the Stiffness of a 5-DOF Hybrid Machine Tool with Actuation Redundancy.” Mechanism and Machine Theory 44: 289–305. doi:https://doi.org/10.1016/j.mechmachtheory.2008.10.001.
- Wu, J., G. Yu, Y. Gao, and L. Wang. 2018. “Mechatronics Modelling and Vibration Analysis of a 2-DOF Parallel Manipulator in a 5-DOF Hybrid Machine Tool.” Mechanism and Machine Theory 121: 430–445. doi:https://doi.org/10.1016/j.mechmachtheory.2017.10.023.
- Zorzi, E.S., and H. D. Nelson. 1980. “The Dynamics of Rotor-Bearing Systems with Axial Torque–A Finite Element Approach.” Journal of Mechanical Design 102: 158–161. doi:https://doi.org/10.1115/1.3254707.