References
- Ahmed, M.M. Z., S. Ataya, M.M.E. -S. Seleman, T. Allam, N. A. Alsaleh, and E. Ahmed. 2021. “Grain Structure, Crystallographic Texture, and Hardening Behavior of Dissimilar Friction Stir Welded AA5083-O and AA5754-H14.” Metals 11 (2): 181–197. doi:https://doi.org/10.3390/met11020181.
- Akinlabi, E. T., A. S. Osinubi, N Madushele, S. A. Akinlabi, and O. M. Ikumapayi. 2020. “Data on Microhardness and Structural Analysis of Friction Stir Spot Welded Lap Joints of AA5083-H116.” Data in Brief 33: 106585. doi:https://doi.org/10.1016/j.dib.2020.106585.
- Ashong, A.N., M. Lee, S. T. Hong, Y. S. Lee, and J. H. Kim. 2021. “Refill Friction Stir Spot Welding of Dissimilar AA6014 Al Alloy and Carbon-Fiber-Reinforced Polymer Composite.” Metals and Materials International 27 (4): 639–649. doi:https://doi.org/10.1007/s12540-020-00788-5.
- Balakrishnan, M., C. Leitão, E. Arruti, E. Aldanondo, and D. M. Rodrigues. 2018. “Influence of Pin Imperfections on the Tensile and Fatigue Behaviour of AA 7075-T6 Friction Stir Lap Welds.” The International Journal of Advanced Manufacturing Technology 97 (5–8): 3129–3139. doi:https://doi.org/10.1007/s00170-018-2172-x.
- DijuSamuel, G., and J. E. R. Dhas. 2017. “Influence of Tool Pin in Friction Stir Welding on Activated Carbon Reinforced Aluminum Metal Matrix Composite.” IOP Conference Series: Materials Science and Engineering 247 (1): 012015. doi:https://doi.org/10.1088/1757-899X/247/1/012015.
- Gao, Y., Y. Liang, X. Ren, and M. Paidar. 2020. “Pre-Hole Friction Stir Spot Welding (FSSW) for Dissimilar Welding of AA2219 to AA3003 Sheets.” Vacuum 182: 109688. doi:https://doi.org/10.1016/j.vacuum.2020.109688.
- Kubit, A., R. Kluz, T. Trzepieciński, D. Wydrzyński, and W. Bochnowski. 2018. “Analysis of the Mechanical Properties and of Micrographs of Refill Friction Stir Spot Welded 7075-T6 Aluminum Sheets.” Archives of Civil and Mechanical Engineering 18 (1): 235–244. doi:https://doi.org/10.1016/j.acme.2017.07.005.
- Manickam, S., C. Rajendran, and V. Balasubramanian. 2020. “Investigation of FSSW Parameters on Shear Fracture Load of AA6061 and Copper Alloy Joints.” Heliyon 6 (6): e04077-1-e04077-13. doi:https://doi.org/10.1016/j.heliyon.2020.e04077.
- Paidar, M., A. Khodabandeh, M. L. Sarab, and M. Taheri. 2015. “Effect of Welding Parameters (Plunge Depths of Shoulder, Pin Geometry, and Tool Rotational Speed) on the Failure Mode and Stir Zone Characteristics of Friction Stir Spot Welded Aluminum 2024-T3 Sheets.” Journal of Mechanical Science and Technology 29 (11): 4639–4644. doi:https://doi.org/10.1007/s12206-015-1009-x.
- Pandey, A. K., and S. S. Mahapatra. 2019. “Investigation of Weld Zone Obtained by Friction Stir Spot Welding (FSSW) of Aluminum-6061 Alloy.” Materials Today: Proceedings 18 (7): 4491–4500. doi:https://doi.org/10.1016/j.matpr.2019.07.419.
- Pandiyarajan, R., P. Maran, S. Marimuthu, and K. Arumugam. 2019. “Mechanical and Metallurgical Characterization of Friction Stir Welded AA6061-ZrO2-C Hybrid MMCs.” Materials Today: Proceedings 19 (2): 256–259. doi:https://doi.org/10.1016/j.matpr.2019.06.760.
- Pandiyarajan, R., P. Maran, S. Marimuthu, and K C. Ganesh. 2017. “Mechanical and Tribological Behavior of the Metal Matrix Composite AA6061/ZrO2/C.” Journal of Mechanical Science & Technology 31 (10): 4711–4717. doi:https://doi.org/10.1007/s12206-017-0917-3.
- Pandiyarajan, R., P. Maran, S. Marimuthu, and M. P. Prabakaran. 2020. “Investigation on Mechanical Properties of ZrO 2, C and AA6061 Metal Matrix Composites.” Advances in Materials and Processing Technologies 1–9. doi:https://doi.org/10.1080/2374068x.2020.1810946.
- Saravanan, V., S. Rajakumar, and A. Muruganandam. 2016. “Effect of Friction Stir Welding Process Parameters on Microstructure and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Aluminum Alloy Joints.” Metallography, Microstructure, and Analysis 5 (6): 476–485. doi:https://doi.org/10.1007/s13632-016-0315-8.
- Selamat, N. F. M., A. H. Baghdadi, Z. Sajuri, and A. H. Kokabi. 2016. “Friction Stir Welding of Similar and Dissimilar Aluminum Alloys for Automotive Applications.” International Journal of Automotive and Mechanical Engineering 13 (2): 3401–3412. doi:https://doi.org/10.15282/ijame.13.2.2016.9.0281.
- Sun, Y. F., H. Fujii, and N. Tsuji. 2013. “Microstructure and Mechanical Properties of Spot Friction Stir Welded Ultrafine Grained 1050 Al and Conventional Grained 6061-T6 Al Alloys.” Materials Science and Engineering: A 585: 17–24. doi:https://doi.org/10.1016/j.msea.2013.07.030.
- Suryanarayanan, R., and V. G. Sridhar. 2020. “Effect of Process Parameters in Pinless Friction Stir Spot Welding of Al 5754-Al 6061 Alloys.”.” Metallography, Microstructure, and Analysis 9 (2): 261–272. doi:https://doi.org/10.1007/s13632-020-00626-5.
- Tong, L., J. Xie, L. Liu, G. Chang, and O. O. Ojo. 2020. “Microscopic Appraisal and Mechanical Behavior of Hybrid Cu/Al Joints Fabricated via Friction Stir Spot Welding-Brazing and Modified Friction Stir Clinching-Brazing.” Journal of Materials Research and Technology 9 (6): 3239–13249. doi:https://doi.org/10.1016/j.jmrt.2020.09.042.
- Vacchi, G. S., R. Silva, A. H. Plaine, U. F. H. Suhuddin, N. G. Alcântara, V. L. Sordi, and C.A.D. Rovere. 2020. “Refill Friction Stir Spot Welded AA5754-H22/Ti-6Al-4V Joints: Microstructural Characterization and Electrochemical Corrosion Behavior of Aluminum Surfaces.” Materials Today Communications 22: 100759. doi:https://doi.org/10.1016/j.mtcomm.2019.100759.
- Yan, Y., Y. Shen, H. Lei, and J. Zhuang. 2019. “Influence of Welding Parameters and Tool Geometry on the Morphology and Mechanical Performance of ABS Friction Stir Spot Welds.” The International Journal of Advanced Manufacturing Technology 103 (5–8): 2319–2330. doi:https://doi.org/10.1007/s00170-019-03703-4.
- Zareie, O., S. M. Mousavizade, H. R. Ezatpour, and N. Farmanbar. 2020. “Effect of Plunging Depth and Dwelling Time on Microstructure and Mechanical Properties of 6061 Aluminum Alloy Welded by Protrusion Friction Stir Spot Welding.” Welding in the World 64 (5): 785–805. doi:https://doi.org/10.1007/s40194-020-00884-5.
- Zhang, C., G. Huang, D. Zhang, Z. Sun, and Q. Liu. 2020. “Microstructure and Mechanical Properties in Dissimilar Friction Stir Welded AA2024/7075 Joints at High Heat Input: Effect of Post-Weld Heat Treatment.” Journal of Materials Research and Technology 9 (6): 14771–14782. doi:https://doi.org/10.1016/j.jmrt.2020.10.053.
- Zhang, G. –J., C. –Y. Xiao, and O. O. Ojo. 2021. “Dissimilar Friction Stir Spot Welding of AA2024 T3/AA7075-T6 Aluminum Alloys under Different Welding Parameters and Media.” Defence Technology 17 (2): 531–544. doi:https://doi.org/10.1016/j.dt.2020.03.008.
- Zhang, H. -F., L. Zhou, W. -L. Li, G. –H. Li, Y. –T. Tang, N. Guo, and J. –C. Feng. 2021. “Effect of Tool Plunge Depth on the Microstructure and Fracture Behavior of Refill Friction Stir Spot Welded AZ91 Magnesium Alloy Joints.” International Journal of Minerals, Metallurgy and Materials 28 (4): 699–709. doi:https://doi.org/10.1007/s12613-020-2044-x.