References
- Benini, E. 2004. “Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor.” Journal of Propulsion and Power 20 (3): 559–565. doi:https://doi.org/10.2514/1.2703.
- Boerner, M., and R. Niehuis. 2021. “Dynamics of Shock Waves Interacting with Laminar Separated Transonic Turbine Flow Investigated by High-Speed Schlieren and Surface Hot-Film Sensors.” Journal of Turbomachinery-Transactions of the Asme 143 (5): 051010-1-051010-10. doi:https://doi.org/10.1115/1.4050330.
- Boukharfane, R., M. Parsani, and J. Bodart. 2020. “Characterization of Pressure Fluctuations within a Controlled-Diffusion Blade Boundary Layer Using the Equilibrium Wall-Modelled LES.” Scientific Reports 10 (1): 1–19. doi:https://doi.org/10.38/s.41598-020-69671-y.
- Casoni, M., A. Magrini, and E. Benini. 2019. “Supersonic Compressor Cascade Shape Optimization under Multiple Inlet Mach Operating Conditions.” Aerospace 6 (6): 64-61-64-20. doi:https://doi.org/10.3390/aerospace6060064.
- Cui, C., Z. G. Zhou, J. H. Zhang, and S. Tao. 2018. “Influence of Key Geometric Parameters on the Aerodynamic Performance of a Supersonic Compressor Cascade.” Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering 232 (12): 2338–2348. doi:https://doi.org/10.1177/0954410017713772.
- Epsipha, P., Z. Mohammad, and A. A. Kamarul. 2016. “CFD Investigation of Transonic Axial Compressor Rotor Blade at Various Off-Design Conditions.” Pertanika Journal of Science and Technology 24 (2): 451–463.
- Hergt, A., J. Klinner, S. Grund, C. Willert, W. Steinert, and M. Beversdorff. 2021. “On the Importance of Transition Control at Transonic Compressor Blades.” Journal of Turbomachinery-Transactions of the Asme 143 (3): 031007-1-031007-11. doi:https://doi.org/10.1115/1.4049783.
- Hergt, A., J. Klinner, W. Steinert, S. Grund, M. Beversdorff, A. Giebmanns, and R. Schnell. 2015. “The Effect of an Eroded Leading Edge on the Aerodynamic Performance of a Transonic Fan Blade Cascade.” Journal of Turbomachinery-Transactions of the Asme 137 (2). doi:https://doi.org/10.1115/1.4028215.
- Hergt, A., J. Klinner, J. Wellner, C. Willert, S. Grund, W. Steinert, and M. Beversdorff. 2019. “The Present Challenge of Transonic Compressor Blade Design.” Journal of Turbomachinery-Transactions of the Asme 141 (9): 091004-1-091004-12. doi:https://doi.org/10.1115/1.4043329.
- Klinner, J., A. Hergt, S. Grund, and C. E. Willert. 2019. “Experimental Investigation of Shock-Induced Separation and Flow Control in a Transonic Compressor Cascade.” Experiments in Fluids 60 (6): 1–18. doi:https://doi.org/10.1007/s00348-019-2736-z.
- Klinner, J., A. Hergt, S. Grund, and C. E. Willert. 2021. “High-Speed PIV of Shock Boundary Layer Interactions in the Transonic Buffet Flow of a Compressor Cascade.” Experiments in Fluids 62 (3): 1–19. doi:https://doi.org/10.1007/s00348-021-03145-3.
- Liu, S. H., R. F. Huang, and L. J. Chen. 2011. “Performance and Inter-Blade Flow of Axial Flow Fans with Different Blade Angles of Attack.” Journal of the Chinese Institute of Engineers 34 (1): 141–153. doi:https://doi.org/10.1080/02533839.2011.553032.
- Mazaheri, K., and S. Khatibirad. 2018. “Optimization of Bump and Blowing to Control the Flow through a Transonic Compressor Blade Cascade.” Shock Waves 28 (2): 285–297. doi:https://doi.org/10.1007/s00193-017-0729-5.
- Persico, G. 2017. “Evolutionary Optimization of Centrifugal Nozzles for Organic Vapours.” Journal of Physics: Conference Series 821. doi:https://doi.org/10.1088/1742-6596/821/1/012015.
- Piovesan, T., A. Magrini, and E. Benini. 2019. “Accurate 2-D Modelling of Transonic Compressor Cascade Aerodynamics.” Aerospace 6 (5): 1–19. doi:https://doi.org/10.3390/aerospace6050057.
- Schreiber, H. A., and H. Starken. 1984. “Experimental Cascade Analysis of a Transonic Compressor Rotor Blade Section.” Journal of Engineering for Gas Turbines and Power-Transactions of the Asme 106 (2): 288–294. doi:https://doi.org/10.1115/1.3239561.
- Shao, Y., H. G. Ou, P. Y. Guo, and H. Y. Yang. 2019. “Shape Optimization of Preform Tools in Forging of Aerofoil Using a Metamodel-Assisted Multi-Island Genetic Algorithm.” Journal of the Chinese Institute of Engineers 42 (4): 297–308. doi:https://doi.org/10.1080/02533839.2019.1584734.
- Sun, Z. Z., X. Miao, and C. Jagadeesh. 2020. “Experimental Investigation of the Transonic Shock-Wave/Boundary-Layer Interaction over a Shock-Generation Bump.” Physics of Fluids 32 (10): 106102. doi:https://doi.org/10.1063/5.0018763.
- Wang, X., H. Z. Xu, J. H. Wang, W. Song, and M. Wang. 2019. “Multi-Objective Optimization of Discrete Film Hole Arrangement on a High Pressure Turbine End-Wall with Conjugate Heat Transfer Simulations.” International Journal of Heat and Fluid Flow 78: 1–13. doi:https://doi.org/10.1016/j.ijheatfluidflow.2019.108428.
- Wu, Y. J., and D. G. Huang. 2019. “Optimization Design of Axial Fan Blade.” Journal of the Chinese Institute of Engineers 42 (6): 473–478. doi:https://doi.org/10.1080/02533839.2019.1611478.
- Yue, S. Y., Y. G. Wang, and H. T. Wang. 2018. “Design and Optimization of Tandem Arranged Cascade in a Transonic Compressor.” Journal of Thermal Science 27 (4): 349–358. doi:https://doi.org/10.1007/s11630-018-1013-4.