References
- Y. Tian, Z. Liu, H. Xiao, G. Zhao, G. Liu, J. Yang, and L. Yang, “Experimental demonstration of a reconfigurable electrooptic directed logic circuit using cascaded carrier-injection micro-ring resonators,” Sci. Rep, Vol. 7, no. 1, pp. 1–10, 2017. doi: https://doi.org/10.1038/s41598-016-0028-x
- S. H. Kim, J. H. Kim, J. W. Choi, C. W. Son, Y. T. Byun, Y. M. Jhon, S. Lee, D. H. Woo, and S. H. Kim, “All-optical half adder using cross gain modulation in semiconductor optical amplifiers,” Opt. Express, Vol. 14, no. 22, pp. 10693, 2006. doi: https://doi.org/10.1364/OE.14.010693
- J. Dong, S. Fu, X. Zhang, P. Shum, L. Zhang, J. Xu, and D. Huang, “Single SOA based all-optical adder assisted by optical bandpass filter: theoretical analysis and performance optimization,” Opt. Commun., Vol. 270, no. 2, pp. 238–246, 2007. doi: https://doi.org/10.1016/j.optcom.2006.09.053
- J. N. Roy, and D. K. Gayen, “Integrated all-optical logic and arithmetic operations with the help of a toad-based interferometer device–alternative approach,” Appl. Opt., Vol. 46, no. 22, pp. 5304, 2007. doi: https://doi.org/10.1364/AO.46.005304
- Y. Fu, X. Hu, and Q. Gong, “Silicon photonic crystal all-optical logic gates,” Phys. Lett. A, Vol. 377, no. 3–4, pp. 329–333, 2013. doi: https://doi.org/10.1016/j.physleta.2012.11.034
- S. Naznin, S. T. Karim, R. T. Tisa, and M. A. Farhad. “Design and simulation of all optical logic gates based on 2d photonic crystal fiber.” In 2015 Int. Conf. Electrical Engineering and Information Communication Technology (ICEEICT). IEEE, 2015, pp. 1–5.
- P. Rani, Y. Kalra, and R. Sinha, “Design of all optical logic gates in photonic crystal waveguides,” Optik, Vol. 126, no. 9–10, pp. 950–955, 2015. doi: https://doi.org/10.1016/j.ijleo.2015.03.003
- S. K. Garai, “A novel all-optical frequency-encoded method to develop arithmetic and logic unit (ALU) using semiconductor optical amplifiers,” J. Lightwave Technol., Vol. 29, no. 23, pp. 3506–3514, 2011. doi: https://doi.org/10.1109/JLT.2011.2170209
- S. Soysouvanh, P. Phongsanam, S. Mitatha, J. Ali, P. Yupapin, I. S. Amiri, and M. Yoshida, “Ultrafast all-optical ALU operation using a soliton control within the cascaded InGaAsP/InP microring circuits,” Microsyst. Technol., Vol. 25, pp. 431–440, 2019. https://doi.org/https://doi.org/10.1007/s00542-018-4011-2.
- T. A. Rahman, M. K. Ahmed, and E. S. M. Saad. “All-optical arithmetic unit based on the hard limiters.” In 6th WSEAS Conference, 2007, pp. 64–67.
- R. S. Weis, and T. K. Gaylord, “Lithium niobate: summary of physical properties and crystal structure,” Applied Physics A Solids and Surfaces, Vol. 37, no. 4, pp. 191–203, 1985. doi: https://doi.org/10.1007/BF00614817
- G. Gopalakrishnan, W. Burns, and C. Bulmer, “Microwave-optical mixing in linbo/sub 3/ modulators,” IEEE Trans. Microwave Theory Tech., Vol. 41, no. 12, pp. 2383–2391, 1993. doi: https://doi.org/10.1109/22.260732
- E. Wooten, K. Kissa, A. Yi-Yan, E. Murphy, D. Lafaw, P. Hallemeier, D. Maack, D. Attanasio, D. Fritz, G. McBrien, et al., “A review of lithium niobate modulators for fiber-optic communications systems,” IEEE J. Sel. Top. Quantum Electron., Vol. 6, no. 1, pp. 69–82, 2000. doi: https://doi.org/10.1109/2944.826874
- A. D’Orazio, M. De Sario, V. Petruzzelli, and F. Prudenzano, “Lithium niobate integrated optical devices,” In Proceedings of 2001 3rd Int. Conf. Transparent Optical Networks (IEEE Cat. No.01EX488). IEEE, 2001, pp. 131–134
- M. Lawrence, “Lithium niobate integrated optics,” Rep. Prog. Phys., Vol. 56, no. 3, pp. 363–429, 1993. doi: https://doi.org/10.1088/0034-4885/56/3/001
- W. Sohler, H. Hu, R. Ricken, V. Quiring, C. Vannahme, H. Herrmann, D. Büchter, S. Reza, W. Grundkötter, S. Orlov, et al., “Integrated optical devices in lithium niobate,” Opt. Photonics. News., Vol. 19, no. 1, pp. 24, 2008. doi: https://doi.org/10.1364/OPN.19.1.000024
- S. Kumar, S. K. Raghuwanshi, and A. Kumar, “Implementation of optical switches using mach–zehnder interferometer,” Opt. Eng., Vol. 52, no. 9, pp. 097106, 2013. doi: https://doi.org/10.1117/1.OE.52.9.097106
- S. K. Raghuwanshi, A. Kumar, and S. Kumar, “1X4 signal router using three mach-zehnder interferometers,” Opt. Eng., Vol. 52, no. 3, pp. 035002, 2013. doi: https://doi.org/10.1117/1.OE.52.3.035002
- A. Kumar, S. Kumar, and S. K. Raghuwanshi, “Implementation of full-adder and full-subtractor based on electro-optic effect in mach–zehnder interferometers,” Opt. Commun., Vol. 324, pp. 93–107, 2014a. doi: https://doi.org/10.1016/j.optcom.2014.03.045
- A. Kumar, and S. K. Raghuwanshi, “Implementation of optical gray code converter and even parity checker using the electro-optic effect in the mach–zehnder interferometer,” Opt. Quantum Electron., Vol. 47, no. 7, pp. 2117–2140, 2015. doi: https://doi.org/10.1007/s11082-014-0087-9
- A. Kumar, S. Kumar, and S. K. Raghuwanshi, “Implementation of XOR/XNOR and AND logic gates by using mach–zehnder interferometers,” Optik, Vol. 125, no. 19, pp. 5764–5767, 2014. doi: https://doi.org/10.1016/j.ijleo.2014.07.037
- S. K. Raghuwanshi, A. Kumar, and A. Rahman, “Implementation of high speed optical universal logic gates using the electro-optic effect-based mach–zehnder interferometer structures,” J. Mod. Opt., Vol. 62, no. 12, pp. 978–988, 2015. doi: https://doi.org/10.1080/09500340.2015.1015636
- S. Kumar, S. K. Raghuwanshi, and B. M. A. Rahman, “Design of universal shift register based on electro-optic effect of linbo3 in mach–zehnder interferometer for high speed communication,” Opt. Quantum Electron., Vol. 47, no. 11, pp. 3509–3524, 2015. doi: https://doi.org/10.1007/s11082-015-0226-y
- S. Kumar Raghuwanshi, A. Kumar, and N.-K. Chen, “Implementation of sequential logic circuits using the mach–zehnder interferometer structure based on electro-optic effect,” Opt. Commun., Vol. 333, pp. 193–208, 2014. doi: https://doi.org/10.1016/j.optcom.2014.07.066
- Y. Chung, and N. Dagli, “An assessment of finite difference beam propagation method,” IEEE J. Quantum Electron., Vol. 26, no. 8, pp. 1335–1339, 1990. doi: https://doi.org/10.1109/3.59679
- Y. Chung, and N. Dagli, “Analysis of z-invariant and z-variant semiconductor rib waveguides by explicit finite difference beam propagation method with nonuniform mesh configuration,” IEEE J. Quantum Electron., Vol. 27, no. 10, pp. 2296–2305, 1991. doi: https://doi.org/10.1109/3.97273
- G. Hadley, “Low-truncation-error finite difference equations for photonics simulation. i. beam propagation,” J. Lightwave Technol., Vol. 16, no. 1, pp. 134–141, 1998. doi: https://doi.org/10.1109/50.654995
- A. Kumar, and S. K. Raghuwanshi, “Electro-optic Mach-Zehnder Interferometer based optical digital magnitude comparator and 1’s complement calculator,” J. Opt. Commun., Vol. 37, no. 2, pp. 137–153, 2016. doi: https://doi.org/10.1515/joc-2015-0028
- N. Mandal, B. Modal, and R. Sarkar, “Design of an optical temperature transmitter for inflammable industry,” IET Sci. Meas. Technol., Vol. 13, no. 5, pp. 671–677, 2019. doi: https://doi.org/10.1049/iet-smt.2018.5100