Preparation and curing behaviour of microencapsulated curing agents for cold-mixed epoxy asphalt

References

• Blaiszik, B., et al., 2009. Microcapsules filled with reactive solutions for self-healing materials. Polymer, 50 (4), 990–997.
   Web of Science ®Google Scholar
• Budrugeac, P. and Segal, E., 2007. Applicability of the Kissinger equation in thermal analysis. Journal of thermal analysis and calorimetry, 88 (3), 703–707.
   Web of Science ®Google Scholar
• Cho, J.-S., Kwon, A., and Cho, C.-G., 2002. Microencapsulation of octadecane as a phase-change material by interfacial polymerization in an emulsion system. Colloid and polymer science, 280 (3), 260–266.
   Web of Science ®Google Scholar
• Crane, L.W., Dynes, P., and Kaelble, D., 1973. Analysis of curing kinetics in polymer composites. Journal of polymer science: polymer letters edition, 11 (8), 533–540.
   Web of Science ®Google Scholar
• El-Gibaly, I., Safwat, S., and Ahmed, M., 1996. Microencapsulation of ketoprofen using w/o/w complex emulsion technique. Journal of microencapsulation, 13 (1), 67–87.
   PubMed Web of Science ®Google Scholar
• Feng, L., et al., 2013. Study on reaction kinetics of epoxy resin cured by a modified dicyandiamide. Journal of applied polymer science, 127 (3), 1895–1900.
   Web of Science ®Google Scholar
• Fuensanta, M., et al., 2013. Effect of the polymer shell in imidazole microencapsulation by solvent evaporation method. Polymer bulletin, 70 (11), 3055–3074.
   Web of Science ®Google Scholar
• Ham, Y.R., et al., 2010. A comparison of some imidazoles in the curing of epoxy resin. Journal of industrial and engineering chemistry, 16 (4), 556–559.
   Web of Science ®Google Scholar
• Ham, Y.R., et al., 2010. Microencapsulation of imidazole curing agent for epoxy resin. Journal of industrial and engineering chemistry, 16 (5), 728–733.
   Web of Science ®Google Scholar
• Han, S., et al., 2020. Performance evaluation of waterborne epoxy resin modified hydrophobic emulsified asphalt micro-surfacing mixture. Construction and building materials, 249, 118835.
   Web of Science ®Google Scholar
• Huang, M., Wen, X., and Wang, L., 2017. Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures. Construction and building materials, 151, 931–938.
   Web of Science ®Google Scholar
• Huang, W., Guo, W., and Wei, Y., 2020. Prediction of paving performance for epoxy asphalt mixture by its time- and temperature-dependent properties. Journal of materials in civil engineering, 32 (3), 04020017.
   Web of Science ®Google Scholar
• Jiang, Y., et al., 2009. Preparation of protamine–titania microcapsules through synergy between layer‐by‐layer assembly and biomimetic mineralization. Advanced functional materials, 19 (1), 150–156.
   Web of Science ®Google Scholar
• Kissinger, H.E., 1957. Reaction kinetics in differential thermal analysis. Analytical chemistry, 29 (11), 1702–1706.
   Web of Science ®Google Scholar
• Li, C., et al., 2017. Facile synthesis of imidazole microcapsules via thiol-click chemistry and their application as thermally latent curing agent for epoxy resins. Composites science and technology, 142, 198–206.
   Web of Science ®Google Scholar
• Li, L., et al., 2020. Influence of surface modified graphene oxide on the mechanical performance and curing kinetics of epoxy resin. Polymers for advanced technologies, 31 (8), 1865–1874.
   Web of Science ®Google Scholar
• Li, Q., et al., 2013. Effects of dual component microcapsules of resin and curing agent on the self-healing efficiency of epoxy. Composites part B: engineering, 55, 79–85.
   Web of Science ®Google Scholar
• Liu, W., et al., 2008. Curing kinetics and properties of epoxy resin–fluorenyl diamine systems. Polymer, 49 (20), 4399–4405.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2021. Microencapsulation of formaldehyde scavenger agent and its application to veneered panels. European journal of wood and wood products, 79 (3), 579–588.
   Web of Science ®Google Scholar
• Lu, Q. and Bors, J., 2015. Alternate uses of epoxy asphalt on bridge decks and roadways. Construction and building materials, 78, 18–25.
   Web of Science ®Google Scholar
• Mashouf Roudsari, G., Mohanty, A.K., and Misra, M., 2014. Study of the curing kinetics of epoxy resins with biobased hardener and epoxidized soybean oil. ACS sustainable chemistry & engineering, 2 (9), 2111–2116.
   Web of Science ®Google Scholar
• Opfermann, J. and Kaisersberger, E., 1992. An advantageous variant of the Ozawa–Flynn–Wall analysis. Thermochimica acta, 203, 167–175.
   Web of Science ®Google Scholar
• Ozawa, T., 1965. A new method of analyzing thermogravimetric data. Bulletin of the chemical society of Japan, 38 (11), 1881–1886.
   Web of Science ®Google Scholar
• Patil, S., et al., 2021. Use of waste polycarbonate in bitumen mix for flexible pavement construction. International research journal of modernization in engineering technology and science, 6, 553–557.
   Google Scholar
• Sharifi, S., et al., 2009. Synthesis, characterization, and biocompatibility of novel injectable, biodegradable, and in situ crosslinkable polycarbonate‐based macromers. Journal of biomedical materials research. Part A, 90 (3), 830–843.
   PubMedGoogle Scholar
• Si, J., et al., 2018. Comparative analysis of cold-mixed epoxy and epoxy SBS-modified asphalts: curing rheology, thermal, and mechanical properties. Construction and building materials, 176, 165–171.
   Web of Science ®Google Scholar
• Si, J., Li, Y., and Yu, X., 2019. Curing behavior and mechanical properties of an eco-friendly cold-mixed epoxy asphalt. Materials and structures, 52 (4), 1–11.
   Web of Science ®Google Scholar
• Stuart, B., 1996. Temperature studies of polycarbonate using Fourier transform Raman spectroscopy. Polymer bulletin, 36 (3), 341–346.
   Web of Science ®Google Scholar
• Wang, C., et al., 2022. Preparation and property optimization of bistable electrochromic microcapsules. Dyes and pigments, 197, 109936.
   Web of Science ®Google Scholar
• Xing, S., et al., 2015. Preparation and characterization of a novel microcapsule-type latent curing agent for epoxy resin. Mater design, 85, 661–670.
   Web of Science ®Google Scholar
• Xu, W.B., et al., 2003. Curing kinetics of epoxy resin–imidazole–organic montmorillonite nanocomposites determined by differential scanning calorimetry. Journal of applied polymer science, 88 (13), 2932–2941.
   Web of Science ®Google Scholar
• Xu, Z.R., et al., 2014. The study of the design method of epoxy emulsified asphalt mixture. Advanced materials research, 1030–1032, 246–249.
   Google Scholar
• Xue, Y. and Qian, Z., 2016. Development and performance evaluation of epoxy asphalt concrete modified with mineral fiber. Construction and building materials, 102, 378–383.
   Web of Science ®Google Scholar
• Xue, Y., et al., 2020. Imidazole-loaded microcapsules as latent curing agent with superior solvent stability and shelf life. Journal of materials science, 55 (17), 7321–7336.
   Web of Science ®Google Scholar
• Yan, Y., et al., 2021. Preparation and curing behavior of latent 2‐PhIm‐PS microcapsule curing agent for epoxy resin. Journal of applied polymer science, 138 (19), 50379.
   Web of Science ®Google Scholar
• Zhang, B., et al., 2020. Microcapsules derived from pickering emulsions as thermal latent curing accelerator for epoxy resins. Journal of industrial and engineering chemistry, 83, 224–234.
   Web of Science ®Google Scholar
• Zhang, F., et al., 2021. Study on preparation and properties of new thermosetting epoxy asphalt. Construction and building materials, 311, 125307.
   Web of Science ®Google Scholar
• Zhang, T., et al., 2012. Fabrication and performances of new kind microencapsulated phase change material based on stearic acid core and polycarbonate shell. Energy conversion and management, 64, 1–7.
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2017. Cure kinetics of cyanate ester resin using microencapsulated dibutyltin dilaurate as catalyst. Polymer bulletin, 74 (4), 1011–1030.
   Web of Science ®Google Scholar
• Zhang, Z., et al., 2020. Preparation and performance characterization of a novel high-performance epoxy resin modified reactive liquid asphalt. Construction and building materials, 263, 120113.
   Web of Science ®Google Scholar
• Zhang, Z., Saunders, R., and Thomas, C.R., 1999. Mechanical strength of single microcapsules determined by a novel micromanipulation technique. Journal of microencapsulation, 16 (1), 117–124.
   PubMed Web of Science ®Google Scholar
• Zhao, L., et al., 2019. Latent curing agent DDM‐PMMA microcapsule for epoxy resin. Journal of applied polymer science, 136 (28), 47757.
   Web of Science ®Google Scholar