132
Views
9
CrossRef citations to date
0
Altmetric
Research Article

Theoretical investigation of measurement procedures for the quality assurance of superficial hyperthermia applicators

, &
Pages 416-425 | Published online: 09 Jul 2009

  • Van Rhoon GC, Rietveld PJM, Van der Zee J. A 433MHz lucite cone waveguide applicator for superficial hyperthermia. Int J Hyperthermia 1998; 14: 13-27.
  • Visser AG, Van Rhoon GC. Technical and clinical quality assurance. In: Seegenschmiedt M, Fessenden P, Vernon C, eds. Thermoradiotherapy and Thermochemotherapy. Berlin: Springer, 1995; 453-72.
  • Hand JW, Lagendijk JJW, Bach Andersen J, Bolomey JC. Quality assurance guidelines for ESHO protocols. Int J Hyperthermia 1989; 5: 421-8.
  • Moros EG, Pickard WF. On the assumption of negligible heat diffusion during the thermal measurement of a nonuniform specific absorption rate. Radiat Res 1999; 152: 312-20.
  • Samaras T, Regli P, Kuster N. Electromagnetic and heat transfer computations for nonionizing radiation dosimetry. Phys Med Biol 2000; 45: 2233-46.
  • Guy AW. Analysis of electromagnetic fields induced in biological tissues by thermographie studies on equivalent phantom models. IEEE Trans Microwave Theo Tech 1971; 19:205-14.
  • Schaubert DH. Electromagnetic heating of tissue-equivalent phantoms with thin, insulating partitions. Bioelectromagnetics 1984; 5: 221-32.
  • Leonard JB, Foster KR, Athey TW. Thermal properties of tissue equivalent phantom materials. IEEE Trans Biomed Eng 1984; 31: 533-6.
  • Ozisik MN. Heat Conduction, 2nd edn. New York: Wiley-Interstience, 1993.
  • Rietveld PJM, Stakenborg J, Van Rhoon GC, Cetas TC, Lumori MLD. Theoretical comparison of the SAR distributions from arrays of modified current sheet applicators with that of lucite cone applicators using Gaussian beam modelling Int J Hyperthermia 2001; 17: 82-96.
  • Rietveld PJM, Lumori MLD, Hand JW, Prior MV, Van der Zee J, Van Rhoon GC. Effectiveness of the Gaussian beam model in predicting SAR distributions from the lucite cone applicator. Int J Hyperthermia 1998; 14: 293-308.
  • Patankar SV. Numerical Heat Transfer and Fluid Flow. New York: Hemisphere Publishing Corporation, 1980.
  • Guy AW, Lehmann JF, Sorensen CC. Therapeutic applications of electromagnetic power. Proc IEEE 1974; 62: 55-75.
  • Chou CK. Phantoms for electromagnetic heating studies. In: Field SB, Franco ni C, eds. Physics and Technology of Hyperthermia. Zoetermeen Martinus Nijhoff Publishers, 1987; 294-318.
  • Samaras T, Rietveld PJM, Van Rhoon GC. Effectiveness of FDTD in predicting SAR distributions from the lucite cone applicator. IEEE Trans Microwave Theo Tech 2000; 48: 2059-63.
  • Taurisano MD, Vander Vorst A. Experimental thermographie analysis of thermal effects induced on a human head exposed to 900-MHz fields of mobile phones. IEEE Trans Microwave Theo Tech 2000; 48: 2022-32.
  • Gopal MK, Cetas TC, Rosman D. Miniature dipole A-field probes for characterizing both phase and amplitude of microwave radiators for hyperthermia. Int J Hyperthermia 1995; 11:769-83.
  • Wust P, Berger J, Fähling H, Nadobny J, Gellermann J, Tilly W, Rau B, Petermann K, Felix R. Scanning E-field sensor device for online measurements in annular phased-array systems. Int J Radiat Oncol Biol Phys 1999; 43: 927-37.
  • Kaatee RS, Van Rhoon GC. An electric field measurement system, using two-dimensional array of diodes. Int J Hyperthermia 1999; 15: 441-54.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.