Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding

References

• M. Adamiak and L. A. Dobrzański: ‘Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface treatment’, Appl. Surf. Sci., 2008, 254, (15), 4552–4556. doi: 10.1016/j.apsusc.2008.01.091
   Web of Science ®Google Scholar
• M. Okayasu, S. Yoshifuji, M. Mizuno, M. Hitomi and H. Yamazaki: ‘Comparison of mechanical properties of die cast aluminium alloys: cold v. hot chamber die casting and high v. low speed filling die casting’, Int. J. Cast Met. Res., 2009, 22, (5), 374–381. doi: 10.1179/174313309X380413
   Web of Science ®Google Scholar
• Q.-C. Hsu and A.T. Do: ‘Minimum porosity formation in pressure die casting by Taguchi method’, Math. Prob. Eng., 2013, 2013, 1–9.
   Web of Science ®Google Scholar
• J. López, F. Faura, J. Hernández and P. Gómez: ‘On the critical plunger speed and three-dimensional effects in high-pressure die casting injection chambers’, J. Manuf. Sci. Eng., 2003, 125, (3), 529–537. doi: 10.1115/1.1580525
   Web of Science ®Google Scholar
• X. Tong, M. Dai and M. Liu: ‘Laser cladding of iron-based self-fluxing alloy and its application in remanufacturing of die-casting plunger’, in ‘Materials processing technology ii, Pts 1–4’, (ed. L. C. Zhao et al.), 1843–1846; 2012, Zhuhai, Advanced Materials Research.
   Google Scholar
• J. Lin, S. Carrera, A. Kunrath, S. Myers, B. Mishra, P. Ried, J. Moore and D. Zhong: ‘Design methodology for optimized die coatings: the case for aluminum pressure die-casting: invited paper B7–1–1, ICMCTF, presented Monday May 2nd, 2005, San Diego’, Surf. Coat. Technol., 2006, 201, (6), 2930–2941. doi: 10.1016/j.surfcoat.2006.06.024
   Web of Science ®Google Scholar
• L. L. G. da Silva, M. Ueda and R. Z. Nakazato: ‘Enhanced corrosion resistance of AISI H13 steel treated by nitrogen plasma immersion ion implantation’, Surf. Coat. Technol., 2007, 201, (19–20), 8291–8294. doi: 10.1016/j.surfcoat.2006.03.063
   Web of Science ®Google Scholar
• F. Faura, J. López and J. Hernández: ‘On the optimum plunger acceleration law in the slow shot phase of pressure die casting machines’, Int. J. Mach. Tools Manuf., 2001, 41, (2), 173–191. doi: 10.1016/S0890-6955(00)00079-1
   Web of Science ®Google Scholar
• L. Chen, L.Q. Ren, Y. Zhao and H. Zhou: ‘The wear-resistance of 3Cr2W8V Steel with cave pit non-smooth surface processed by laser’, J. Bionic Eng., 2008, 5, 34–39. doi: 10.1016/S1672-6529(08)60069-4
   Web of Science ®Google Scholar
• I. Krupka, M. Vrbka and M. Hartl: ‘Effect of surface texturing on mixed lubricated non-conformal contacts’, Tribol Int., 2008, 41, (11), 1063–1073. doi: 10.1016/j.triboint.2007.11.016
   Web of Science ®Google Scholar
• L. M. Gao, P. R. Yang, I. Dymond, J. Fisher and Z. M. Jin: ‘Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants’, Tribol Int., 2010, 43, (10), 1851–1860. doi: 10.1016/j.triboint.2010.02.006
   Web of Science ®Google Scholar
• M. Geiger, S. Roth and W. Becker: ‘Influence of laser-produced microstructures on the tribological behaviour of ceramics’, Surf. Coat. Technol., 1998, 100, 17–22. doi: 10.1016/S0257-8972(97)00581-1
   Web of Science ®Google Scholar
• M. Wakuda, Y. Yamauchi, S. Kanzaki and Y. Yasuda: ‘Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact’, Wear, 2003, 254, (3–4), 356–363. doi: 10.1016/S0043-1648(03)00004-8
   Web of Science ®Google Scholar
• M. Vrbka, I. Krupka, P. Svoboda, P. Sperka, T. Navrat, M. Hartl and J. Nohava: ‘Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts’, Tribol Int., 2011, 44, (12), 1726–1735. doi: 10.1016/j.triboint.2011.06.019
   Web of Science ®Google Scholar
• L. Eadie and T. K. Ghosh: ‘Biomimicry in textiles: past, present and potential. An overview’, J. R. Soc. Interface/the Royal Society, 2011, 8, (59), 761–775. doi: 10.1098/rsif.2010.0487
   PubMed Web of Science ®Google Scholar
• P. Fratzl: ‘Biomimetic materials research: what can we really learn from nature's structural materials?’, J. R. Soc. Interface/the Royal Society, 2007, 4, (15), 637–642. doi: 10.1098/rsif.2007.0218
   PubMed Web of Science ®Google Scholar
• A.R. Parker and C.R. Lawrence: ‘Water capture by a desert beetle’, Nature, 2001, 414, (6859), 33–34. doi: 10.1038/35102108
   PubMed Web of Science ®Google Scholar
• S. Kamat, X. Su, R. Ballarini and A. H. Heuer: ‘Structural basis for the fracture toughness of the shell of the conch Strombusgigas’, Nature, 2000, 405, (6790), 1036–1040. doi: 10.1038/35016535
   PubMed Web of Science ®Google Scholar
• Y. Fang, G. Sun, Q. Cong, G. H. Chen and L. Q. Ren: ‘Effects of methanol on wettability of the non-smooth surface on butterfly wing’, J. Bionic Eng., 2008, 5, (2), 127–133. doi: 10.1016/S1672-6529(08)60016-5
   Web of Science ®Google Scholar
• Y. Ma, F. Lin, Z. Yan, J. Zhuang, Z. Wang, Z. Deng and J. Tong: ‘Micro morphology and properties of tribological action for shell in Cyclinasinensis’, Trans. Chin. Soc. Agric. Eng., 2013, 29, (18), 298–304.
   Google Scholar
• R. Ballarini and A. H. Heuer: ‘Secrets in the shell – the body armor of the queen conch is much tougher than comparable synthetic materials. What secrets does it hold?’, Am. Sci., 2007, 95, (5), 422–429. doi: 10.1511/2007.67.3726
   Web of Science ®Google Scholar
• Q. C. Jiang, H. L. Sui and Q. F. Guan: ‘Thermal fatigue behavior of new type high-Cr cast hot work die steel’, Isij Int., 2004, 44, (6), 1103–1107. doi: 10.2355/isijinternational.44.1103
   Web of Science ®Google Scholar
• H. Zhou, L. Chen, W. Wang, L. Q. Ren, H. Y. Shan and Z. H. Zhang: ‘Abrasive particle wear behavior of 3Cr2W8V steel processed to bionic non-smooth surface by laser’, Mat. Sci. Eng. A-Struct., 2005, 412, (1–2), 323–327. doi: 10.1016/j.msea.2005.09.042
   Google Scholar
• I. Sherrington and P. Hayhurst: ‘Simultaneous observation of the evolution of debris density and friction coefficient in dry sliding steel contacts’, Wear, 2001, 249, (3–4), 182–187. doi: 10.1016/S0043-1648(01)00572-5
   Web of Science ®Google Scholar
• W. A. Glaeser: ‘Characterization of tribological materials’, xiii, 174; 1993, New York, Butterworth-Heinemann.
   Google Scholar
• M. H. Zhu and Z. R. Zhou: ‘An investigation of molybdenum disulfide bonded solid lubricant coatings in fretting conditions’, Surf. Coat. Technol., 2001, 141, (2–3), 240–245. doi: 10.1016/S0257-8972(01)01194-X
   Web of Science ®Google Scholar
• R. Dowson: ‘Boundary lubrication-An appraisal of world literature’; 1969, New York, ASME Press.
   Google Scholar
• F. Zhou, K. Adachi and K. Kato: ‘Wear-mechanism map of amorphous carbon nitride coatings sliding against silicon carbide balls in water’, Surf. Coat. Technol., 2006, 200, (16–17), 4909–4917. doi: 10.1016/j.surfcoat.2005.04.041
   Web of Science ®Google Scholar
• O. Barrau, C. Boher, R. Gras and E. Rezai-Aria: ‘Analysis of the friction and wear behaviour of hot work tool steel for forging’, Wear, 2003, 255, 1444–1454. doi: 10.1016/S0043-1648(03)00280-1
   Web of Science ®Google Scholar