Improving wear resistance of steels through nanocrystalline structures obtained by bainitic transformation

References

• D. Bhattacharyya, A. Hajra, A. Basu and S. Jana: ‘The effect of grain size on the wear characteristics of high speed steel tools’, Wear, 1977, 42, (1), 63–69. doi: 10.1016/0043-1648(77)90167-3
   Web of Science ®Google Scholar
• A. Sundström, J. Rendón and M. Olsson: ‘Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions’, Wear, 2001, 250–251, (1–12), 744–754. doi: 10.1016/S0043-1648(01)00712-8
   Web of Science ®Google Scholar
• G. Bregliozzi, A. Di Schino, J. M. Kenny and H. Haefke: ‘The influence of atmospheric humidity and grain size on the friction and wear of AISI 304 austenitic stainless steel’, Mater. Lett., 2003, 57, (29), 4505–4508. doi: 10.1016/S0167-577X(03)00351-3
   Web of Science ®Google Scholar
• R. Nafar Dehsorkhi, S. Sabooni, F. Karimzadeh, A. Rezaeian and M. H. Enayati: ‘The effect of grain size and martensitic transformation on the wear behavior of AISI 304L stainless steel’, Mater. Des., 2014, 64, 56–62. doi: 10.1016/j.matdes.2014.07.022
   Web of Science ®Google Scholar
• S. Gündüz, R. Kaçar and H. S. Soykan: ‘Wear behaviour of forging steels with different microstructure during dry sliding’, Tribol. Int., 2008, 41, (5), 348–355. doi: 10.1016/j.triboint.2007.09.002
   Web of Science ®Google Scholar
• R. Rementeria, I. García, M. M. Aranda and F. G. Caballero: ‘Reciprocating-sliding wear behavior of nanostructured and ultra-fine high-silicon bainitic steels’, Wear, 2015, 338–339, 202–209. doi: 10.1016/j.wear.2015.06.011
   Web of Science ®Google Scholar
• G. Liu, J. Lu and K. Lu: ‘Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening’, Mater. Sci. Eng. A, 2000, 286, (1), 91–95. doi: 10.1016/S0921-5093(00)00686-9
   Web of Science ®Google Scholar
• N. R. Tao, M. L. Sui, J. Lu and K. Lua: ‘Surface nanocrystallization of iron induced by ultrasonic shot peening’, Nanostruct. Mater., 1999, 11, (4), 433–440. doi: 10.1016/S0965-9773(99)00324-4
   Google Scholar
• G. Liu, S. C. Wang, X. F. Lou, J. Lu and K. Lu: ‘Low carbon steel with nanostructured surface layer induced by high-energy shot peening’, Scr. Mater., 2001, 44, (8–9), 1791–1795. doi: 10.1016/S1359-6462(01)00738-2
   Web of Science ®Google Scholar
• B. N. Mordyuk, Y. V. Milman, M. O. Iefimov, G. I. Prokopenko, V. V. Silberschmidt, M. I. Danylenko and A. V. Kotko: ‘Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel’, Surf. Coat. Technol., 2008, 202, (19), 4875–4883. doi: 10.1016/j.surfcoat.2008.04.080
   Web of Science ®Google Scholar
• J. Z. Lu, L. Zhang, A. X. Feng, Y. F. Jiang and G. G. Cheng: ‘Effects of laser shock processing on mechanical properties of Fe–Ni alloy’, Mater. Des., 2009, 30, (9), 3673–3678. doi: 10.1016/j.matdes.2009.02.015
   Web of Science ®Google Scholar
• N. R. Tao, Z. B. Wang, W. P. Tong, M. L. Sui, J. Lu and K. Lu: ‘An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment’, Acta Mater., 2002, 50, (18), 4603–4616. doi: 10.1016/S1359-6454(02)00310-5
   Web of Science ®Google Scholar
• Z. B. Wang, N. R. Tao, S. Li, W. Wang, G. Liu, J. Lu and K. Lu: ‘Effect of surface nanocrystallization on friction and wear properties in low carbon steel’, Mater. Sci. Eng. A, 2003, 352, (1–2), 144–149. doi: 10.1016/S0921-5093(02)00870-5
   Web of Science ®Google Scholar
• G. Li, J. Chen and D. Guan: ‘Friction and wear behaviors of nanocrystalline surface layer of medium carbon steel’, Tribol. Int., 2010, 43, (11), 2216–2221. doi: 10.1016/j.triboint.2010.07.004
   Web of Science ®Google Scholar
• L. Zhou, G. Liu, Z. Han and K. Lu: ‘Grain size effect on wear resistance of a nanostructured AISI52100 steel’, Scr. Mater., 2008, 58, (6), 445–448. doi: 10.1016/j.scriptamat.2007.10.034
   Web of Science ®Google Scholar
• W. Yan, L. Fang, K. Sun and Y. Xu: ‘Effect of surface work hardening on wear behavior of Hadfield steel’, Mater. Sci. Eng. A, 2007, 460–461, 542–549. doi: 10.1016/j.msea.2007.02.094
   Web of Science ®Google Scholar
• Y. Sun: ‘Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel’, Tribol. Int., 2013, 57, 67–75. doi: 10.1016/j.triboint.2012.07.015
   Web of Science ®Google Scholar
• R. Z. Valiev and T. G. Langdon: ‘Principles of equal-channel angular pressing as a processing tool for grain refinement’, Prog. Mater. Sci., 2006, 51, (7), 881–981. doi: 10.1016/j.pmatsci.2006.02.003
   Web of Science ®Google Scholar
• A. P. Zhilyaev and T. G. Langdon: ‘Using high-pressure torsion for metal processing: fundamentals and applications’, Prog. Mater. Sci., 2008, 53, (6), 893–979. doi: 10.1016/j.pmatsci.2008.03.002
   Web of Science ®Google Scholar
• A. Phelippeau, S. Pommier, C. Prioul and M. Clavel: ‘Heavily drawn eutectoid steel: a nanostructured material’, in ‘Nanostructures: synthesis, functional properties and applications’, (ed. T. Tsakalakos et al.), 251–270; 2003, Netherlands, Springer.
   Google Scholar
• C. Suryanarayana: ‘Mechanical alloying and milling’, Prog. Mater. Sci., 2001, 46, (1–2), 1–184. doi: 10.1016/S0079-6425(99)00010-9
   Web of Science ®Google Scholar
• F. G. Caballero and H. K. D. H. Bhadeshia: ‘Very strong bainite’, Curr. Opin. Solid State Mater. Sci., 2004, 8, (3–4), 251–257. doi: 10.1016/j.cossms.2004.09.005
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia: ‘Bainite in steels’, 2nd edn; 2001, London, Maney.
   Google Scholar
• C. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia: ‘Acceleration of low-temperature bainite’, ISIJ Int., 2003, 43, (11), 1821–1825. doi: 10.2355/isijinternational.43.1821
   Web of Science ®Google Scholar
• T. Sourmail, F. G. Caballero, C. Garcia-Mateo, V. Smanio, C. Ziegler, M. Kuntz, R. Elvira, A. Leiro, E. Vuorinen and T. Teeri: ‘Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications’, Mater. Sci. Technol., 2013, 29, (10), 1166–1173. doi: 10.1179/1743284713Y.0000000242
   Web of Science ®Google Scholar
• C. Garcia-Mateo, F. G. Caballero, T. Sourmail, M. Kuntz, J. Cornide, V. Smanio and R. Elvira: ‘Tensile behaviour of a nanocrystalline bainitic steel containing 3 wt% silicon’, Mater. Sci. Eng. A, 2012, 549, 185–192. doi: 10.1016/j.msea.2012.04.031
   Web of Science ®Google Scholar
• F. G. Caballero, M. K. Miller, A. J. Clarke and C. Garcia-Mateo: ‘Examination of carbon partitioning into austenite during tempering of bainite’, Scr. Mater., 2010, 63, (4), 442–445. doi: 10.1016/j.scriptamat.2010.04.049
   Web of Science ®Google Scholar
• K. Hase, C. Garcia-Mateo and H. K. D. H. Bhadeshia: ‘Bimodal size-distribution of bainite plates’, Mater. Sci. Eng. A, 2006, 438–440, 145–148. doi: 10.1016/j.msea.2005.12.070
   Web of Science ®Google Scholar
• T. S. Wang, J. Yang, C. J. Shang, X. Y. Li, B. Lv, M. Zhang and F. C. Zhang: ‘Sliding friction surface microstructure and wear resistance of 9SiCr steel with low-temperature austempering treatment’, Surf. Coat. Technol., 2008, 202, (16), 4036–4040. doi: 10.1016/j.surfcoat.2008.02.013
   Web of Science ®Google Scholar
• P. Zhang, F. C. Zhang, Z. G. Yan, T. S. Wang and L. H. Qian: ‘Wear property of low-temperature bainite in the surface layer of a carburized low carbon steel’, Wear, 2011, 271, (5–6), 697–704. doi: 10.1016/j.wear.2010.12.025
   Web of Science ®Google Scholar
• J. Yang, T. S. Wang, B. Zhang and F. C. Zhang: ‘Sliding wear resistance and worn surface microstructure of nanostructured bainitic steel’, Wear, 2012, 282–283, 81–84. doi: 10.1016/j.wear.2012.02.008
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia, ‘Novel steels for rails,’ in ‘Encyclopedia of materials: science and technology’, 1–7; 2002, Oxford, Elsevier.
   Google Scholar
• A. Leiro, E. Vuorinen, K. G. Sundin, B. Prakash, T. Sourmail, V. Smanio, F. G. Caballero, C. Garcia-Mateo and R. Elvira: ‘Wear of nano-structured carbide-free bainitic steels under dry rolling-sliding conditions’, Wear, 2013, 298–299, 42–47. doi: 10.1016/j.wear.2012.11.064
   Web of Science ®Google Scholar
• T. Sourmail, V. Smanio, C. Ziegler, V. Heuer, M. Kuntz, F. G. Caballero, C. Garcia-Mateo, J. Cornide, R. Elvira, A. Leiro, E. Vuorinen and T. Teeri: ‘Novel nanostructured bainitic steel grades to answer the need for high-performance steel components (Nanobain)’, 129; 2013, Luxembourg, European Commission.
   Google Scholar
• S. Das Bakshi, A. Leiro, B. Prakash and H. K. D. H. Bhadeshia: ‘Dry rolling/sliding wear of nanostructured bainite’, Wear, 2014, 316, (1–2), 70–78. doi: 10.1016/j.wear.2014.04.020
   Web of Science ®Google Scholar
• A. Leiro, A. Kankanala, E. Vuorinen and B. Prakash: ‘Tribological behaviour of carbide-free bainitic steel under dry rolling/sliding conditions’, Wear, 2011, 273, (1), 2–8. doi: 10.1016/j.wear.2011.03.025
   Web of Science ®Google Scholar
• W. Solano-Alvarez, E. J. Pickering and H. K. D. H. Bhadeshia: ‘Degradation of nanostructured bainitic steel under rolling contact fatigue’, Mater. Sci. Eng. A, 2014, 617, 156–164. doi: 10.1016/j.msea.2014.08.071
   Web of Science ®Google Scholar
• M. Calcagnotto, Y. Adachi, D. Ponge and D. Raabe: ‘Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging’, Acta Mater., 2011, 59, (2), 658–670. doi: 10.1016/j.actamat.2010.10.002
   Web of Science ®Google Scholar
• P. J. Tavner, J. Xiang and F. Spinato: ‘Reliability analysis for wind turbines’, Wind Energy, 2007, 10, (1), 1–18. doi: 10.1002/we.204
   Web of Science ®Google Scholar
• J. Rosinski and D. Smurthwaite: ‘Troubleshooting wind gearbox problems’, Gear Solutions, 2010, 8, 22–33.
   Google Scholar
• M. H. Evans: ‘White structure flaking (WSF) in wind turbine gearbox bearings: Effects of ‘butterflies’ and white etching cracks (WECs)’, Mater. Sci. Technol., 2012, 28, (1), 3–22. doi: 10.1179/026708311X13135950699254
   Web of Science ®Google Scholar
• S. Das Bakshi, P. H. Shipway and H. K. D. H. Bhadeshia: ‘Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite’, Wear, 2013, 308, (1–2), 46–53. doi: 10.1016/j.wear.2013.09.008
   Web of Science ®Google Scholar
• M. A. Moore: ‘The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials’, Wear, 1974, 28, (1), 59–68. doi: 10.1016/0043-1648(74)90101-X
   Web of Science ®Google Scholar