Epsilon carbide precipitation and wear behaviour of low alloy wear resistant steels

References

• A. K. Jha, B. K. Prasad, O. P. Modi, S. Das and A. H. Yegneswaran: ‘Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel’, Wear, 2003, 254, 120–128. doi: 10.1016/S0043-1648(02)00309-5
   Web of Science ®Google Scholar
• A. Sundström, J. Rendón and M. Olsson: ‘Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions’, Wear, 2001, 250, 744–754. doi: 10.1016/S0043-1648(01)00712-8
   Web of Science ®Google Scholar
• J. Rendón and M. Olsson: ‘Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods’, Wear, 2009, 267, 2055–2061. doi: 10.1016/j.wear.2009.08.005
   Web of Science ®Google Scholar
• T. W. Chenjea, D. J. Simbib and E. Navarac: ‘Relationship between microstructure, hardness, impact toughness and wear performance of selected grinding media for mineral ore milling operations’, Mater. Des., 2004, 25, 11–18. doi: 10.1016/S0261-3069(03)00168-7
   Web of Science ®Google Scholar
• E. Zdravecká, J. Tkáčová and M. Ondáč: ‘Effect of microstructure factors on abrasion resistance of high-strength steels’, Res. Agric. Eng., 2014, 60, 115–120.
   Google Scholar
• S. D. Bakshi, P. H. Shipway and H. K. D. H. Bhadeshia: ‘Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite’, Wear, 2013, 308, 46–53. doi: 10.1016/j.wear.2013.09.008
   Web of Science ®Google Scholar
• D. Rai, B. Singh and J. Singh: ‘Characterisation of wear behaviour of different microstructures in Ni–Cr–Mo–V steel’, Wear, 2007, 263, 821–829. doi: 10.1016/j.wear.2006.12.014
   Web of Science ®Google Scholar
• S. Gündüz and M. Acarer: ‘The effect of heat treatment on high temperature mechanical properties of microalloyed medium carbon steel’, Mater. Des., 2006, 27, 1076–1085. doi: 10.1016/j.matdes.2005.01.020
   Web of Science ®Google Scholar
• X. Deng, Z. Wang, Y. Han, H. Zhao and G. Wang: ‘Microstructure and abrasive wear behavior of medium carbon low alloy martensitic abrasion resistant steel’, J. Iron Steel Res. Int., 2014, 21, 98–103. doi: 10.1016/S1006-706X(14)60015-7
   Web of Science ®Google Scholar
• X. Deng, Z. Wang, Y. Tian, T. Fu and G. Wang: ‘An investigation of mechanical property and three-body impact abrasive wear behavior of a 0.27% C dual phase steel’, Mater. Des., 2013, 49, 220–225. doi: 10.1016/j.matdes.2013.01.024
   Web of Science ®Google Scholar
• L. He and C. Zhang: ‘An investigation of the role of secondary carbide in martensitic steel during three-body abrasion wear’, Wear, 1994, 176, (1), 103–109. doi: 10.1016/0043-1648(94)90203-8
   Web of Science ®Google Scholar
• H. Fu, Q. Xiao and H. Fu: ‘Heat treatment of multi-element low alloy wear-resistant steel’, Mater. Sci. Eng., 2005, 396, (A), 206–212. doi: 10.1016/j.msea.2005.01.023
   Google Scholar
• M. X. Zhang, P. M. Kelly and J. D. Gates: ‘The effect of heat treatment on the toughness, hardness and microstructure of low carbon white cast irons’, J. Mater. Sci., 2001, 36, (16), 3865–3875. doi: 10.1023/A:1017949600733
   Web of Science ®Google Scholar
• Y. Wang, T. Q. Lei and J. J. Liu: ‘Tribo-metallographic behavior of high carbon steels in dry sliding II. Microstructure and wear’, Wear, 1999, 231, 12–19. doi: 10.1016/S0043-1648(99)00116-7
   Web of Science ®Google Scholar
• M. X. Wei, S. Q. Wang, L. Wang, X. H. Cui and K. M. Chen: ‘Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel’, Tribol. Int., 2011, 44, (7–8), 898–905. doi: 10.1016/j.triboint.2011.03.005
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia and R. W. K. Honeycombe: ‘Steels-microstructure and properties’; 2006, Oxford, Butterworth–Heinemann.
   Google Scholar
• ‘Mechanical properties and microstructural features of AISI 4340 high-strength alloy steel under quenched and tempered conditions’, J. Mater. Process. Technol., 1999, 87, (1–3), 198–206. doi: 10.1016/S0924-0136(98)00351-3
   Web of Science ®Google Scholar
• V. Leskovšek, B. Šuštaršič and G. Jutriša: ‘The influence of austenitizing and tempering temperature on the hardness and fracture toughness of hot-worked H11 tool steel’, J. Mater. Process. Technol., 2006, 178, (1–3), 328–334. doi: 10.1016/j.jmatprotec.2006.04.016
   Web of Science ®Google Scholar
• O. Yasuya and T. Imao: ‘Epsilon carbide precipitation during tempering of plain carbon martensite’, Metall. Trans. A, 1992, 23, 2737–2751. doi: 10.1007/BF02651753
   Web of Science ®Google Scholar
• K. A. Taylor, J. B. Sande Vander and M. Cohen: ‘Discussion of an interpretation of the carbon redistribution process during aging of high-carbon martensite’, Metall. Trans. A, 1993, 24, 2585–2588. doi: 10.1007/BF02646537
   Web of Science ®Google Scholar
• H. Y. Li, X. W. Lu, W. J. Li and X. J. Jin: ‘Microstructure and mechanical properties of an ultrahigh strength 40simnncr steel during one-step quenching and partitioning process’, Metall. Mater. Trans. A, 2010, 41, 1284–1300. doi: 10.1007/s11661-010-0184-8
   Web of Science ®Google Scholar
• Q. S. Bai, Y. X. Yao, P. Bex and G. Zhang: ‘Wear mechanism and cutting performance of polycrystalline diamond tool in machining high pressure laminated flooring’, Tribology, 2003, 23, (2), 81–85.
   Google Scholar
• J. Li: ‘Abrasion on metal’, 122–127; 1990, Beijing, China, Metallurgical Industry Press.
   Google Scholar
• M. A. Moore: ‘The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials’, Wear, 1974, 28, (1), 59–68. doi: 10.1016/0043-1648(74)90101-X
   Web of Science ®Google Scholar
• K. Ueda, N. Ishikawa and Y. Murota: ‘Influence of matrix structure and hard carbide on abrasive resistance of steel plates’, Mater. Sci. Forum, 2012, 706–709, 2342–2347.
   Google Scholar
• E. Tekin and P. M. Kelly: ‘In precipitation from iron-base alloys’, (ed. G. R. Speich and J. B. Clark), 173–229; 1965, Warrendale, PA, AIME.
   Google Scholar
• I. M. Hutchings: ‘Tribology-friction and wear of engineering materials’; 1992, London, CRC Press, Arnold.
   Google Scholar