Evolution of the microstructure and properties of laser-clad FeCrNiCoB_x high-entropy alloy coatings

References

• B. S. Murty, J. Yeh and S. Ranganathan: ‘High-entropy alloys’; 2014, London, Butterworth-Heinemann.
   Google Scholar
• Y. Qiu, M. A. Gibson, H. L. Fraser and N. Birbilis: ‘Corrosion characteristics of high entropy alloys (HEAs)’, Mater. Sci. Technol. Lond., 2015, 31, (10), 1235–1243. doi:10.1179/1743284715Y.0000000026
   Web of Science ®Google Scholar
• Y. Zhang, T. T. Zuo, Z. Tang, M. C. Gao, K. A. Dahmen, P. K. Liaw and Z. P. Lu: ‘Microstructures and properties of high-entropy alloys’, Prog. Mater. Sci., 2014, 61, 1–93. doi:10.1016/j.pmatsci.2013.10.001
   Web of Science ®Google Scholar
• N. G. Jones, K. A. Christofidou and H. J. Stone: ‘Rapid precipitation in an Al0.5 CrFeCoNiCu high entropy alloy’, Mater. Sci. Technol. Lond., 2015, 31, (10), 1171–1177. doi:10.1179/1743284715Y.0000000004
   Web of Science ®Google Scholar
• V. Dolique, A. L. Thomann, P. Brault, Y. Tessier and P. Gillon: ‘Thermal stability of AlCoCrCuFeNi high entropy alloy thin films studied by in-situ XRD analysis’, Surf. Coat. Technol., 2010, 204, (12–13), 1989–1992. doi:10.1016/j.surfcoat.2009.12.006
   Web of Science ®Google Scholar
• C. Z. Yao, P. Zhang, M. Liu, G. R. Li, J. Q. Ye, P. Liu and Y. X. Tong: ‘Electrochemical preparation and magnetic study of Bi–Fe–Co–Ni–Mn high entropy alloy’, Electrochim. Acta, 2008, 53, (28), 8359–8365. doi:10.1016/j.electacta.2008.06.036
   Web of Science ®Google Scholar
• Y. C. Lin and Y. H. Cho: ‘Elucidating the microstructural and tribological characteristics of NiCrAlCoCu and NiCrAlCoMo multicomponent alloy clad layers synthesized in situ’, Surf. Coat. Technol., 2009, 203, (12), 1694–1701. doi:10.1016/j.surfcoat.2009.01.004
   Web of Science ®Google Scholar
• L. Luo, S. Liu, J. Yu, J. Luo and J. Li: ‘Effect of Al content on high temperature erosion properties of arc-sprayed FeMnCrAl/Cr3C2 coatings’, Trans. Nonferr. Met. Soc., 2010, 20, (2), 201–206. doi:10.1016/S1003-6326(09)60121-7
   Web of Science ®Google Scholar
• D. Liu, J. B. Cheng and H. Ling: ‘Electrochemical behaviours of (NiCoFeCrCu)95B5 high entropy alloy coatings’, Mater. Sci. Technol. Lond., 2015, 31, (10), 1159–1164. doi:10.1179/1743284714Y.0000000739
   Web of Science ®Google Scholar
• W. Wang, W. Wang and J. Yeh: ‘Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures’, J. Alloys Compd., 2014, 589, 143–152. doi:10.1016/j.jallcom.2013.11.084
   Web of Science ®Google Scholar
• G. A. Salishchev, M. A. Tikhonovsky, D. G. Shaysultanov, N. D. Stepanov, A. V. Kuznetsov, I. V. Kolodiy, A. S. Tortika and O. N. Senkov: ‘Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system’, J. Alloys Compd., 2014, 591, 11–21. doi:10.1016/j.jallcom.2013.12.210
   Web of Science ®Google Scholar
• F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler and E. P. George: ‘The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy’, Acta Mater., 2013, 61, (15), 5743–5755. doi:10.1016/j.actamat.2013.06.018
   Web of Science ®Google Scholar
• H. Zhang, Y. Pan and Y. He: ‘Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding’, Mater. Design, 2011, 32, (4), 1910–1915. doi:10.1016/j.matdes.2010.12.001
   Web of Science ®Google Scholar
• M. Kulka, N. Makuch, P. Dziarski and A. Piasecki: ‘A study of nanoindentation for mechanical characterization of chromium and nickel borides’ mixtures formed by laser boriding’, Ceram. Int., 2014, 40, (4), 6083–6094. doi:10.1016/j.ceramint.2013.11.059
   Web of Science ®Google Scholar
• J. Do, H. Lee, C. Jeon, D. J. Ha, C. P. Kim, B. Lee and L. Sunghak: ‘Effects of Cr and B contents on volume fraction of (Cr,Fe)2B and hardness in Fe-based alloys used for powder injection molding’, Metall. Mater. Trans. A, 2012, 43, (7), 2237–2250. doi:10.1007/s11661-012-1086-8
   Web of Science ®Google Scholar
• K. Lee, C. Son, J. S. Kim, S. Lee, K. Y. Kim and C. P. Kim: ‘Corrosion resistance of steel-based surface alloyed materials fabricated with Fe-based metamorphic powders by high-energy electron beam irradiation’, Mater. Sci. Eng. A, 2006, 441, (1–2), 291–298. doi:10.1016/j.msea.2006.08.049
   Web of Science ®Google Scholar
• I. Hemmati, R. M. Huizenga, V. Ocelík and J. T. M. De Hosson: ‘Microstructural design of hardfacing Ni–Cr–B–Si–C alloys’, Acta Mater., 2013, 61, (16), 6061–6070. doi:10.1016/j.actamat.2013.06.048
   Web of Science ®Google Scholar
• A. A. Sorour, R. R. Chromik, R. Gauvin, I. H. Jung and M. Brochu: ‘Understanding the solidification and microstructure evolution during CSC-MIG welding of Fe–Cr–B-based alloy’, Mater. Charact., 2013, 86, 127–138. doi:10.1016/j.matchar.2013.09.017
   Web of Science ®Google Scholar
• S. Ma, J. Xing, D. Yi, H. Fu, J. Zhang, Y. Li, Z. Zhang, G. Liu and B. Zhu: ‘Effects of chromium addition on corrosion resistance of Fe–3.5B alloy in liquid zinc’, Surf. Coat. Technol., 2011, 205, (21–22), 4902–4909. doi:10.1016/j.surfcoat.2011.04.101
   Web of Science ®Google Scholar
• R. Li, Z. Li, J. Huang and Y. Zhu: ‘Dilution effect on the formation of amorphous phase in the laser cladded Ni–Fe–B–Si–Nb coatings after laser remelting process’, Appl. Surf. Sci., 2012, 258, (20), 7956–7961. doi:10.1016/j.apsusc.2012.04.144
   Web of Science ®Google Scholar
• A. Takeuchi and I. Akihisa: ‘Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element’, Mater. Trans., 2005, 46, (12), 2817–2829. doi:10.2320/matertrans.46.2817
   Web of Science ®Google Scholar
• I. Goldfarb, W. D. Kaplan, S. Ariely and M. Bamberger: ‘Fault-induced polytypism in (Cr, Fe)2B’, Philos. Mag. A, 1995, 72, (4), 963–979. doi:10.1080/01418619508239947
   Web of Science ®Google Scholar
• Y. Lin and J. Hu: ‘Borides in microcrystalline Fe-Cr-Mo-B-Si alloys’, J. Mater. Sci., 1991, 26, (10), 2833–2840. doi:10.1007/BF02387759
   Web of Science ®Google Scholar
• H. W. Jin, C. G. Park and M. C. Kim: ‘In situ TEM heating studies on the phase transformation of metastable phases in Fe–Cr–B alloy spray coatings’, Mater. Sci. Eng. A, 2001, 304–306, 321–326. doi:10.1016/S0921-5093(00)01525-2
   Web of Science ®Google Scholar
• B. J. Kooi, Y. T. Pei and J. T. M. De Hosson: ‘The evolution of microstructure in a laser clad TiB–Ti composite coating’, Acta Mater., 2003, 51, (3), 831–845. doi:10.1016/S1359-6454(02)00475-5
   Web of Science ®Google Scholar