Microstructural aspects of wear behaviour of TiC coated low alloy steel

References

• D. L. Olson and C. E. Cross: ‘Friction and wear in the mining and mineral industries’, ‘ASM handbook, friction, lubrication and wear technology’, Vol. 18, 549–555; 1992, Materials Park, OH, ASM International.
   Google Scholar
• J. D. Ayers and R. N. Bolster: ‘Abrasive wear with fine diamond particles of carbide containing aluminium and titanium surfaces’, Wear, 1984, 93, 193–205. doi: 10.1016/0043-1648(84)90069-3
   Web of Science ®Google Scholar
• S. Mridha and T. N. Baker: ‘Metal matrix composite layers formed by laser processing of commercial purity Ti–SiCp in nitrogen environment’, Mater. Sci. Technol., 1996, 12, 595–602. doi: 10.1179/026708396790165984
   Web of Science ®Google Scholar
• S. Mridha and T. N. Baker: ‘Metal matrix composite layer formation with 3 µm SiCp powder on IMI318 titanium alloy surfaces through laser treatment’, J. Mater. Process. Technol., 1997, 63, 432–437. doi: 10.1016/S0924-0136(96)02660-X
   Web of Science ®Google Scholar
• S. Mridha, A. N. Md Idriss, M. A. Maleque, Suryanto, and A. Souad: ‘Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc’, Int. J. Mech. Mater. Eng., 2012, 7, 48–53.
   Google Scholar
• S. Mridha, A. N. Md Idriss and T. N. Baker: ‘Incorporation of TiC particles on AISI 4340 low alloy steel surfaces via tungsten inert gas arc melting’, Adv. Mater. Res., 2012, 445, 655–660. doi: 10.4028/www.scientific.net/AMR.445.655
   Google Scholar
• S. Mridha and A. N. Md Idriss: ‘Microstructure of TIG melted composite coating produced using 1.0 and 1.5 mg/mm2 TiC at an energy input of 2640 J/mm’, Adv. Mater. Res., 2012, 576, 463–466. doi: 10.4028/www.scientific.net/AMR.576.463
   Google Scholar
• X. H. Wang, S. L. Song, S. Y. Qu and Z. D. Zou: ‘Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process’, Surf. Coat. Technol., 2007, 201, 5899–5905. doi: 10.1016/j.surfcoat.2006.10.042
   Web of Science ®Google Scholar
• http://www.us-nano.com/inc/sdetail/200.
   Google Scholar
• C. C. Degnan and P. H. Shipway: ‘A comparison of the reciprocating sliding wear behaviour of steel based metal matrix composites processed from self-propagating high-temperature synthesised Fe–TiC and Fe–TiB2 masteralloys’, Wear, 2002, 252, 832–841. doi: 10.1016/S0043-1648(02)00051-0
   Web of Science ®Google Scholar
• S. Mridha and T. N. Baker: ‘Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces’, Mater. Sci. Technol., 2015, 31, 355–360.
   Web of Science ®Google Scholar
• S. Mridha, A. N. Md Idriss, M. A. Maleque, I. I. Yaacob and T. N. Baker: ‘Melting of multipass surface tracks in steel incorporating titanium carbide powders’, Mater. Sci. Technol., 2015, 31, 1362–1369. doi: 10.1179/1743284714Y.0000000712
   Web of Science ®Google Scholar
• I. M. Hutchings: ‘Tribology friction and wear of engineering materials’, 135–150; 1992, London, Edward Arnold.
   Google Scholar
• K. H. Zum Gahr: ‘Sliding wear of ceramic–ceramic, ceramic–steel and steel–steel pairs in lubricated and unlubricated contact’, Wear, 1989, 133, 1–22. doi: 10.1016/0043-1648(89)90109-9
   Web of Science ®Google Scholar
• S. Bahadur and C.-N. Yang: ‘Friction and wear behavior of tungsten and titanium carbide coatings’, Wear, 1996, 196, 156–163. doi: 10.1016/0043-1648(95)06896-1
   Web of Science ®Google Scholar
• H. Dong and T. Bell: ‘Tribological behavior of alumina sliding against Ti6Al4V in unlubricated contact’, Wear, 1999, 225–229, 874–884. doi: 10.1016/S0043-1648(98)00407-4
   Web of Science ®Google Scholar
• P. J. Blau: ‘Interpretations of the friction and wear break-in behavior of metals in sliding contact’, Wear, 1981, 71, 29–43. doi: 10.1016/0043-1648(81)90137-X
   Web of Science ®Google Scholar
• Jiaren Jiang, F. H. Stott and M. M. Stack: ‘The role of triboparticulates in dry sliding wear’, Tribo. Int., 1998, 31, 245–256. doi: 10.1016/S0301-679X(98)00027-9
   Web of Science ®Google Scholar
• S. Kumar, A. Bhattacharyya, D. K. Mondal, K. Biswas and J. Maity: ‘Dry sliding wear behaviour of medium carbon steel against an alumina disk’, Wear, 2011, 270, 413–421. doi: 10.1016/j.wear.2010.12.007
   Web of Science ®Google Scholar
• G. Rasool and M. M. Stack: ‘Wear maps for TiC composite based coatings deposited on 303 stainless steel’, Tribo. Int., 2014, 74, 93–102. doi: 10.1016/j.triboint.2014.02.002
   Web of Science ®Google Scholar
• R. L. Deuis, C. Subramaniam and J. M. Yellup: ‘Three body abrasive wear of composite coatings in dry and wet environment’, Wear, 1998, 214, 112–130. doi: 10.1016/S0043-1648(97)00197-X
   Web of Science ®Google Scholar