Microstructure evolution of GCr15 in cold ring rolling and following heat treatment

References

• P. F. F. Walker: ‘Improving the reliability of highly loaded rolling bearings: the effect of upstream processing on inclusions’, Mater. Sci. Technol., 2014, 30, 385–410. doi: 10.1179/1743284713Y.0000000491
   Web of Science ®Google Scholar
• A. A. Hamedany: ‘Fatigue model of bearing steel based on stressed volume’, Mater. Sci. Technol., 2016, http://www.maneyonline.com/doi/full/10.1179/1743284715Y.0000.
   Web of Science ®Google Scholar
• L. Hua and Z. Z. Zhi: ‘The extremum parameters in ring rolling’, J. Mater. Process. Technol., 1997, 69, 273–276. doi: 10.1016/S0924-0136(97)00029-0
   Web of Science ®Google Scholar
• D. S. Qian, L. Hua and Z. J. Zuo: ‘Investigation of distribution of plastic zone in the process of plastic penetration’, J. Mater. Process. Technol., 2007, 187–188, 734–737. doi: 10.1016/j.jmatprotec.2006.11.039
   Web of Science ®Google Scholar
• F. L. Yan, L. Hua and Y. Q. Wu: ‘Planning feed speed in cold ring rolling’, Int. J. Machine Tools Manuf., 2007, 47, 1695–1701. doi:10.1016/j.ijmachtools.2007.01.009
   Web of Science ®Google Scholar
• H. Utsunomiya, Y. Saito, T. Shinoda and I. Takasu: ‘Elastic–plastic finite element analysis of cold ring rolling process’, J. Mater. Process. Technol., 2002, 125–126, 613–618. doi: 10.1016/S0924-0136(02)00354-0
   Web of Science ®Google Scholar
• Y. Yea, Y. Ko, N. Kim and J. Lee: ‘Prediction of spread, pressure distribution and roll force in ring rolling process using rigid–plastic finite element method’, J. Mater. Process. Technol., 2003, 140, 478–486. doi: 10.1016/S0924-0136(03)00721-0
   Web of Science ®Google Scholar
• X. Han, L. Hua, G. H. Zhou, B. H. Lu and X. Wang: ‘A new cylindrical ring rolling technology for manufacturing thin-walled cylindrical ring’, Int. J. Mech. Sci., 2014, 81, (4), 95–108. doi: 10.1016/j.ijmecsci.2014.01.018
   Web of Science ®Google Scholar
• X. Han and L. Hua: ‘Plastic deformation behaviors and mechanical properties of rolled rings of 20CrMnTi alloy in combined radial and axial ring rolling’, Mater. Design, 2014, 58, (6), 508–517. doi: 10.1016/j.matdes.2014.01.072
   Web of Science ®Google Scholar
• H. Yang, L. G. Guo and M. Zhan: ‘Role of friction in cold ring rolling’, J. Mater. Sci. Technol., 2005, 21, 914–920. doi: 10.1179/174328405X71639
   Web of Science ®Google Scholar
• L. G. Guo and H. Yang: ‘Effect of sizes of forming rolls on cold ring rolling by 3D-FE numerical simulation’, Trans. Nonferrous Met. SOC. China, 2006, 16, 645–65l. doi: 10.1016/S1003-6326(06)60270-7
   Web of Science ®Google Scholar
• H. Yang, L. G. Guo, M. Zhan and Z. C. Sun: ‘Research on the influence of material properties on cold ring rolling processes by 3D-FE numerical simulation’, J. Mater. Process. Technol., 2006, 177, 634–638. doi: 10.1016/j.jmatprotec.2006.03.209
   Web of Science ®Google Scholar
• D. S. Qian and L. Hua: ‘Blank design optimisation for T-section profile ring rolling’, Ironmak. Steelmak., 2009, 36, 462–469.
   Google Scholar
• K. Ryttberg, M. K. Wedel, V. Recina, P. Dahlman and L. Nyborg: ‘The effect of cold ring rolling on the evolution of microstructure and texture in 100Cr6 steel’, Mater. Sci. Eng. A, 2010, 527, 2431–2436. doi: 10.1016/j.msea.2009.12.016
   Web of Science ®Google Scholar
• H. W. Li, L. Feng and H. Yang: ‘Deformation mechanism of cold ring rolling in view of texture evolution predicted by a newly proposed polycrystal plasticity model’, Trans. Nonferrous Met. Soc. China, 2013, 23, 3729–3738. doi: 10.1016/S1003-6326(13)62923-4
   Web of Science ®Google Scholar
• J. Epp, H. Surm, T. Hirsch and F. Hoffmann: ‘Residual stress relaxation during heating of bearing rings produced in two different manufacturing chains’, J. Mater. Process. Technol., 2011, 211, 637–643. doi: 10.1016/j.jmatprotec.2010.11.022
   Web of Science ®Google Scholar
• M. Wu, L. Hua, Y. C. Shao and Q. J. Zhou: ‘Influence of the annealing cooling rate on the microstructure evolution and deformation behaviours in the cold ring rolling of medium steel’, Mater. Design, 2011, 32, 2292–2300. doi: 10.1016/j.matdes.2010.11.007
   Web of Science ®Google Scholar
• W. T. Wei and M. Wu: ‘Effect of annealing cooling rate on microstructure and mechanical property of 100Cr6 steel ring manufactured by cold ring rolling process’, J. Cent. South Univ., 2014, 21, 14–19. doi:10.1007/s11771-014-1909-4
   Web of Science ®Google Scholar
• M. M. Rashad and H. M. Baioumy: ‘Effect of thermal treatment on the crystal structure and morphology of zirconia nanopowders produced by three different routes’, J. Mater. Process. Technol., 2008, 195, 178–185. doi: 10.1016/j.jmatprotec.2007.04.135
   Web of Science ®Google Scholar
• J. Beswick: ‘Effect of prior cold work on the martensite transformation in SAE 52100’, Metall. Trans. A, 1984, 15A, 299–306. doi: 10.1007/BF02645115
   Google Scholar
• M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, N. K. Tsenev, R. Z. Valiev and T. G. Langdon: ‘Structural evolution and the Hall-Petch relationship in an Al–Mg–Li–Zr alloy with ultra-fine grain size’, Acta Mater., 1997, 45, 4751–4757. doi: 10.1016/S1359-6454(97)00120-1
   Web of Science ®Google Scholar