Preparation and microstructure of AlCoCrFeNi high-entropy alloy complex curve coatings

References

• C. Changjun, W. Maocai, L. Yiming, W. Dongsheng and J. Ren: ‘Mass transfer trends and the formation of a single deposition spot during high-energy micro-arc alloying of AZ31 Mg alloy’, J. Mater. Process. Technol., 2008, 198, (1–3), 275–280. doi: 10.1016/j.jmatprotec.2007.07.009
   Web of Science ®Google Scholar
• C. Luo, X. Xiong and S.-J. Dong: ‘TiB2/Ni coatings on surface of copper alloy electrode prepared by electrospark deposition’, Trans. Nonferr. Metal. Soc., 2011, 21, (2), 317–321. doi: 10.1016/S1003-6326(11)60715-2
   Web of Science ®Google Scholar
• P. Guo, Y. Shao, C. Zeng, M. Wu and W. Li: ‘Oxidation characterization of FeAl coated 316 stainless steel interconnects by high-energy micro-arc alloying technique for SOFC’, Mater. Lett., 2011, 65, (19–20), 3180–3183. doi: 10.1016/j.matlet.2011.06.032
   Web of Science ®Google Scholar
• Y.-J. Xie and M.-C. Wang: ‘A feasibility study of preparing MCrAlX/BN composite coatings by electrospark deposition process’, J. Alloys Compd., 2009, 484, (1–2), 21–24. doi: 10.1016/j.jallcom.2009.05.017
   Web of Science ®Google Scholar
• D. W. Heard and M. Brochu: ‘Development of a nanostructure microstructure in the Al–Ni system using the electrospark deposition process’, J. Mater. Process. Technol., 2010, 210, (6–7), 892–898. doi: 10.1016/j.jmatprotec.2010.02.001
   Web of Science ®Google Scholar
• S. Cadney and M. Brochu: ‘Formation of amorphous Zr41.2Ti13.8Ni10Cu12.5Be22.5 coatings via the ElectroSpark Deposition process’, Intermetallics, 2008, 16, (4), 518–523. doi: 10.1016/j.intermet.2007.12.013
   Web of Science ®Google Scholar
• S. Cadney, G. Goodall, G. Kim, A. Moran and M. Brochu: ‘The transformation of an Al-based crystalline electrode material to an amorphous deposit via the electrospark welding process’, J. Alloys Compd., 2009, 476, (1–2), 147–151. doi: 10.1016/j.jallcom.2008.09.017
   Web of Science ®Google Scholar
• J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau and S.-Y. Chang: ‘Nanostructured high-entropy alloys with multiple principal elements novel alloy design concepts and outcomes’, Adv. Eng. Mater., 2004, 6, (5), 299–303. doi: 10.1002/adem.200300567
   Web of Science ®Google Scholar
• B. Cantor, I. T. H. Chang, P. Knight and A. J. B. Vincent: ‘Microstructural development in equiatomic multicomponent alloys’, Mater. Sci. Eng. A, 2004, 375–377, 213–218. doi: 10.1016/j.msea.2003.10.257
   Web of Science ®Google Scholar
• H. Zhang, W. Wu, Y. He, M. Li and S. Guo: ‘Formation of core–shell structure in high entropy alloy coating by laser cladding’, Appl. Surf. Sci., 2016, 363, 543–547. doi: 10.1016/j.apsusc.2015.12.059
   Web of Science ®Google Scholar
• W. Sheng, X. Yang, C. Wang and Y. Zhang: ‘Nano-crystallization of high-entropy amorphous NbTiAlSiWxNy films prepared by magnetron sputtering’, Entropy, 2016, 18, (6), 226. doi: 10.3390/e18060226
   Web of Science ®Google Scholar
• Y. Shon, S. S. Joshi, S. Katakam, R. Shanker Rajamure and N. B. Dahotre: ‘Laser additive synthesis of high entropy alloy coating on aluminum: corrosion behavior’, Mater. Lett., 2015, 142, 122–125. doi: 10.1016/j.matlet.2014.11.161
   Web of Science ®Google Scholar
• Z. Wang, X. Wang, H. Yue, G. Shi and S. Wang: ‘Microstructure, thermodynamics and compressive properties of AlCoCrCuMn-x (x = Fe, Ti) high-entropy alloys’, Mater. Sci. Eng. A, 2015, 627, 391–398. doi: 10.1016/j.msea.2015.01.002
   Web of Science ®Google Scholar
• H. F. Li, X. H. Xie, K. Zhao, Y. B. Wang, Y. F. Zheng, W. H. Wang and L. Qin: ‘In vitro and in vivo studies on biodegradable CaMgZnSrYb high-entropy bulk metallic glass’, Acta Biomater., 2013, 9, (10), 8561–8573. doi: 10.1016/j.actbio.2013.01.029
   PubMed Web of Science ®Google Scholar
• B. Gludovatz, A. Hohenwarter, D. Catoor, E. H. Chang, E. P. George and R. O. Ritchie: ‘A fracture-resistant high-entropy alloy for cryogenic applications’, Science, 2014, 345, (6201), 1153–1158. doi: 10.1126/science.1254581
   PubMed Web of Science ®Google Scholar
• Y. Zhang, T. T. Zuo, Z. Tang, M. C. Gao, K. A. Dahmen, P. K. Liaw and Z. P. Lu: ‘Microstructures and properties of high-entropy alloys’, Prog. Mater. Sci., 2014, 61, 1–93. doi: 10.1016/j.pmatsci.2013.10.001
   Web of Science ®Google Scholar
• M.-H. Chuang, M.-H. Tsai, W.-R. Wang, S.-J. Lin and J.-W. Yeh: ‘Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys’, Acta Mater., 2011, 59, (16), 6308–6317. doi: 10.1016/j.actamat.2011.06.041
   Web of Science ®Google Scholar
• H. Yuan, M.-H. Tsai, G. Sha, F. Liu, Z. Horita, Y. Zhu and J. T. Wang: ‘Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation’, J. Alloys Compd., 2016, 686, 15–23. doi: 10.1016/j.jallcom.2016.05.337
   Web of Science ®Google Scholar
• A. Takeuchi, K. Amiya, T. Wada and K. Yubuta: ‘Dual HCP structures formed in senary ScYLaTiZrHf multi-principal-element alloy’, Intermetallics, 2016, 69, 103–109. doi: 10.1016/j.intermet.2015.10.022
   Web of Science ®Google Scholar
• Y.-L. Chen, C.-W. Tsai, C.-C. Juan, M.-H. Chuang, J.-W. Yeh, T.-S. Chin and S.-K. Chen: ‘Amorphization of equimolar alloys with HCP elements during mechanical alloying’, J. Alloys Compd., 2010, 506, (1), 210–215. doi: 10.1016/j.jallcom.2010.06.179
   Web of Science ®Google Scholar
• Z. Li, K. G. Pradeep, Y. Deng, D. Raabe and C. C. Tasan: ‘Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off’, Nature, 2016, 534, (7606), 227–230.
   PubMed Web of Science ®Google Scholar
• Q. H. Li, T. M. Yue, Z. N. Guo and X. Lin: ‘Microstructure and corrosion properties of AlCoCrFeNi high entropy alloy coatings deposited on AISI 1045 steel by the electrospark process’, Metall. Mater. Trans. A, 2012, 44, (4), 1767–1778. doi: 10.1007/s11661-012-1535-4
   Web of Science ®Google Scholar
• X.-R. Wang, Z.-Q. Wang, P. He, T.-S. Lin and Y. Shi: ‘Microstructure and wear properties of CuNiSiTiZr high-entropy alloy coatings on TC11 titanium alloy produced by electrospark computer numerical control deposition process’, Surf. Coat. Technol., 2015, 283, (15), 156–161. doi: 10.1016/j.surfcoat.2015.10.013
   Web of Science ®Google Scholar
• X.-R. Wang, Z.-Q. Wang, P. He and T.-S. Lin: ‘The high-energy micro-arc spark—computer numerical control deposition of planar NURBS curve coatings’, Int. J. Adv. Manuf. Technol., 2016, doi:10.1007/s00170-016-8698-x.
   Web of Science ®Google Scholar
• W.-R. Wang, W.-L. Wang, S.-C. Wang, Y.-C. Tsai, C.-H. Lai and J.-W. Yeh: ‘Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys’, Intermetallics, 2012, 26, 44–51. doi: 10.1016/j.intermet.2012.03.005
   Web of Science ®Google Scholar