Hot ductility behaviour of high manganese steels with varying aluminium contents

References

• W. Song, T. Ingendahl and W. Bleck: ‘Control of strain hardening behavior in high-mn austenitic steels’, Acta Metall. Sin. Engl. Lett., 2014, 27, 546–556. doi: 10.1007/s40195-014-0084-9
   Web of Science ®Google Scholar
• G. Frommeyer, U. Brüx and P. Neumann: ‘Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes’, ISIJ Int., 2003, 43, 438–446. doi: 10.2355/isijinternational.43.438
   Web of Science ®Google Scholar
• O. Grässel, L. Krüger, G. Frommeyer and L. Meyer: ‘High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development – properties – application’, Int. J. Plast., 2000, 16, 1391–1409. doi: 10.1016/S0749-6419(00)00015-2
   Web of Science ®Google Scholar
• S. Allain, J. P. Chateau and O. Bouaziz: ‘A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel’, Mater. Sci. Eng. A, 2004, 387–389, 143–147. doi: 10.1016/j.msea.2004.01.060
   Web of Science ®Google Scholar
• G. I. S. L. Cardoso, B. Mintz and S. Yue: ‘Hot ductility of aluminium and titanium containing steels with and without cyclic temperature oscillations', Ironmak. Steelmak., 1995, 22, 365–377.
   Google Scholar
• K. Schwerdtfeger: ‘Rissanfälligkeit von Stählen beim Stranggiessen und Warmumformen’, 1994, Düsseldorf, Stahleisen.
   Google Scholar
• M. M. Wolf: ‘Fine intergranular surface cracks in bloom casting’, Trans. ISIJ, 1984, 24, 351–358. doi: 10.2355/isijinternational1966.24.351
   Google Scholar
• D. N. Crowther and B. Mintz: ‘Influence of grain size and precipitation on hot ductility of microalloyed steels’, Mater. Sci. Technol., 1986, 2, 1099–1105. doi: 10.1179/mst.1986.2.11.1099
   Web of Science ®Google Scholar
• S.-K. Kim, J.-W. Cho, W.-J. Kwak, G. Kim and O. Kwon: ‘Development of TWIP steel for automotive application', Proc. 3rd Int. Conf. on 'New dewelopments in metallurgical process technologies', Germany, 2007, Steel Institute VDEh Duesseldorf, 690–697.
   Google Scholar
• S. E. Kang, A. Tuling, J. R. Banerjee, W. D. Gunawardana and B. Mintz: ‘Hot ductility of TWIP steels’, Mater. Sci. Technol., 2011, 27, 95–100. doi: 10.1179/026708309X12506933873387
   Web of Science ®Google Scholar
• S. E. Kang, A. Tuling, I. Lau, J. R. Banerjee and B. Mintz: ‘The hot ductility of Nb/V containing high Al, TWIP steels’, Mater. Sci. Technol., 2011, 27, 909–915. doi: 10.1179/026708309X12595712305915
   Web of Science ®Google Scholar
• S. E. Kang, J. R. Banerjee and B. Mintz: ‘Influence of S and AlN on hot ductility of high Al, TWIP steels’, Mater. Sci. Technol., 2012, 28, 589–596. doi: 10.1179/1743284711Y.0000000109
   Web of Science ®Google Scholar
• S. E. Kang, J. R. Banerjee, A. S. Tuling and B. Mintz: ‘Influence of B on hot ductility of high Al, TWIP steels’, Mater. Sci. Technol., 2014, 30, 486–494. doi: 10.1179/1743284713Y.0000000399
   Web of Science ®Google Scholar
• B. Mintz, A. Tuling and A. Delgado: ‘Influence of silicon, aluminium, phosphorus and boron on hot ductility of TRansformation induced plasticity assisted steels’, Mater. Sci. Technol., 2003, 19, 1721–1726. doi: 10.1179/174328413X13789824293948
   Web of Science ®Google Scholar
• H. Su, W. D. Gunawadarna, A. Tuling and B. Mintz: ‘Influence of Al and P additions on hot ductility of steels’, Mater. Sci. Technol., 2007, 23, 1357–1366. doi: 10.1179/174328407X179737
   Web of Science ®Google Scholar
• S. E. Kang, A. Tuling and B. Mintz: ‘The hot ductility of Al-containing TRIP steels melted in-situ,' Assoc. Iron Steel Technol., 2008, 2, 717–726.
   Google Scholar
• T. Brune, D. Senk, R. Walpot and B. Steenken: ‘Hot ductility behavior of boron containing microalloyed steels with varying manganese contents’, Metallur. Mater. Trans. B, 2015, 46, 1400–1408. doi: 10.1007/s11663-015-0306-1
   Web of Science ®Google Scholar
• B. Mintz and D. N. Crowther: ‘Hot ductility of steels and its relationship to the problem of transverse cracking in continuous casting’, Int. Mater. Rev., 2010, 55, 168–196. doi: 10.1179/095066009X12572530170624
   Web of Science ®Google Scholar
• K. M. Banks, A. Tuling and B. Mintz: ‘The influence of N on hot ductility of V- Nb-, and Nb-Ti-containing steels using improved thermal simulation of continuous casting', J. S. Afr. Inst. Min. Metall., 2011, 111, 711–716.
   Google Scholar
• G. Gigacher, R. Pierer, J. Wiener and C. Bernhard: ‘Metallurgical aspects of casting high-manganese steel grades’, Adv. Eng. Mater., 2006, 8, 1096–1100. doi: 10.1002/adem.200600152
   Web of Science ®Google Scholar
• K. Blazek, H. Yin, G. Skoczylas, M. McClymonds and M. Frazee, eds.: ‘Development and evaluation of lime-alumina based powder for casting high aluminium trip steel grades’, vol. 1; 2011, AISTech 2011, Indianapolis, USA, Association for Iron & Steel Technology, Pittsburgh, Pennsylvania, USA.
   Google Scholar
• J. J. Becker, M. A. Madden, T. T. Natarajan, T. J. Piccone, E. J. Serrano and S. R. Story, eds.: ‘Liquid, solid interactions during continuous casting of high-Al advanced high-strength steels’; 2005, AISTech 2005, Charlotte, NC, USA, Association for Iron & Steel Technology, Warrendale, PA.
   Google Scholar
• E. Walner: ‘Light and easily formable: new high-manganese steel from Hoesch Hohenlimburg is now available’, 2014. Available at: https://www.thyssenkrupp-steel.com/de/presse/pressemitteilungen/pressemitteilung-8960.html.
   Google Scholar
• R. Schulze: ‘Acroni produce X120Mn12 grade on continuous caster from primetals technologies’, 2015, London, UK. Available at: https://www.primetals.com/en/pressandmedia/Documents/PR2015060785en.pdf.
   Google Scholar
• K. M. Banks, A. P. Bentley and A. Koursaris, eds.: ‘A precipitation model for predicting hot ductility behaviour in microalloyed steels’, 38th ed.; 2000, Toronto, ON, Canada, 42nd Mechanical Working Steel Processing Proceedings.
   Google Scholar
• B. Mintz, S. Yue and J. J. Jonas: ‘Hot ductility of steels and its relationship to the problem of transverse cracking during continuous casting’, Int. Mater. Rev., 1991, 36, 187–220. doi: 10.1179/imr.1991.36.1.187
   Web of Science ®Google Scholar
• B. G. Thomas, J. K. Brimacombe and I. V. Samarasekera: ‘The formation of panel cracks in steel ingots: a state-of-the-art review', ISS Trans., 1986, 7, 7–20.
   Google Scholar
• H. G. Suzuki, S. Nishimura and S. Yamaguchi: ‘Characteristics of hot ductility in steels subjected to the melting and solidification', Trans. ISIJ, 1982, 22, 48–56.
   Google Scholar
• D. Senk, H. Emmerich, J. Rezende and R. Siquieri: ‘Estimation of segregation in iron-manganese steels’, Adv. Eng. Mater., 2007, 9, 695–702. doi: 10.1002/adem.200700138
   Web of Science ®Google Scholar
• M. M. Wolf: ‘Initial solidification & strand surface quality of peritectic steels', in ‘Continuous casting’ (ed. M. M. Wolf), pp. 1–111; 1997, Warrendale, OP, Iron & steel society.
   Google Scholar
• H. Jacobi: ‘Giessen und Erstarren von Stahl', Chap. 3 in ‘Metallurgie des Stranggiessens’ (K. Schwerdtfeger and A. Diener, eds.), pp. 125–170, 1992, Düsseldorf, Stahleisen.
   Google Scholar