References
- C. Leyens and M. Peters: ‘Titanium and titanium alloys – fundamental and applications’, 2003, Weinheim, Wiley-VCH Verlag GmbH & Co KGaA.
- V. N. Moiseyev: ‘Titanium alloys: Russian aircraft and aerospace applications’, Vol. 5, 195–206; 2005, New York, Taylor & Francis Group, CRC Press.
- W. Zhou and K. G. Chew: ‘Effect of welding on impact toughness of butt-joints in a titanium alloy’, Mater. Sci. Eng. A, 2003, 347, 180–185. doi: 10.1016/S0921-5093(02)00596-8
- N. Kishore Babu, S. Ganesh Sundara Raman, R. Mythili and S. Saroja: ‘Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing’, Mater. Charact., 2007, 58, 581–587. doi: 10.1016/j.matchar.2006.07.001
- M. Balasubramanian, V. Jayabalan and V. Balasuramanian: ‘Effect of pulsed gas tungsten arc welding on corrosion behavior of Ti-6Al-4V titanium alloy’, Mater. Des., 2008, 29, 1359–1363. doi: 10.1016/j.matdes.2007.06.009
- G. Çam and S. Mistikoglu: ‘Recent developments in friction stir welding of Al-alloys’, J. Mater. Eng. Perform., 2014, 23, (6), 1936–1953. doi: 10.1007/s11665-014-0968-x
- G. Çam: ‘Friction stir welded structural materials: beyond Al-alloys’, Int. Mater. Rev., 2011, 56, (1), 1–48. doi: 10.1179/095066010X12777205875750
- R. S. Mishra, M. W. Mahoney, Y. Sato, Y. Hovanski and R. Verma: ‘Friction stir welding and processing VI’, 2011, San Diego, CA, Wiley-TMS Hoboken.
- P. D. Edwards and M. Ramulu: ‘Investigation of microstructure, surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses’, Sci. Technol. Weld. Join., 2009, 14, (5), 476–483. doi: 10.1179/136217109X425838
- C. D. Sorensen and T. W. Nelson: ‘Progress in polycrystalline cubic boron nitride FSW tooling’, Proc. 4rd Int. Sym. on ‘Friction Stir Welding’, 2003, Park City, Utah, USA.
- Y. Zhang, Y. S. Sato, H. Kokawa, S. H. C. Park and S. Hirano: ‘Microstructural characteristics and mechanical properties of Ti-6Al-4V friction stir welds’, Mater. Sci. Eng. A, 2008, 485, 448–455. doi: 10.1016/j.msea.2007.08.051
- L. Zhou, H. J. Liu and Q. W. Liu: ‘Effect of rotation speed on microstructure and mechanical properties of Ti-6Al-4V friction stir welded joints’, Mater. Des., 2010, 31, (5), 2631–2636. doi: 10.1016/j.matdes.2009.12.014
- S. Mironov, Y. Zhang, Y. S. Sato and H. Kokawa: ‘Crystallography of transformed β microstructure in friction stir welded Ti–6Al–4V alloy’, Scr. Mater., 2008, 59, 511–514. doi: 10.1016/j.scriptamat.2008.04.038
- Y. Zhang, Y. S. Sato, H. Kokawa, S. H. C. Park and S. Hirano: ‘Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool’, Mater. Sci. Eng. A, 2008, 488, 25–30. doi: 10.1016/j.msea.2007.10.062
- H. J. Liu, L. Zhou and Q. W. Liu: ‘Microstructural characteristics and mechanical properties of friction stir welded joints of Ti-6Al-4V titanium alloy’, Mater. Des., 2010, 31, 1650–1655. doi: 10.1016/j.matdes.2009.08.025
- S. Yoon, R. Ueji and H. Fujii: ‘Effect of rotation rate on microstructure and texture evolution during friction stir welding of Ti–6Al–4V plates’, Mater. Charact., 2015, 106, 352–358. doi: 10.1016/j.matchar.2015.06.025
- S. Yoon, R. Ueji and H. Fujii: ‘Effect of initial microstructure on Ti–6Al–4V joint by friction stir welding’, Mater. Des., 2015, 58, 1269–1276.
- I. Weiss, R. Srinivasan, P. J. Bania, D. Eylon and S. L. Semiatin: ‘Recovery, recrystallization and mechanical properties of Ti-6Al-4V alloy’, Proc. 125rd Int. Sym. On ‘TMS Titanium and Shaping and Forming Held’ Anaheim, California, 1073–1078.
- A. J. Ramirez and M. C. Juhas: ‘Microstructural evolution in Ti-6Al-4V friction stir welds’, Mater. Sci. Forum, 2003, 426–432, 2999–3004. doi: 10.4028/www.scientific.net/MSF.426-432.2999
- J. Wang, J. Su, R. S. Mishra, R. Xu and J. A. Baumann: ‘Tool wear mechanisms in friction stir welding of Ti–6Al–4V alloy’, Wear, 2014, 321, 25–32. doi: 10.1016/j.wear.2014.09.010
- A. L. Pilchak, W. Tang, H. Sahiner, J. C. Reynolds and J. C. Williams: ‘Microstructure evolution during friction stir welding of mill-annealed Ti-6Al-4V’, Metall. Mater. Trans. A, 2011, 42, (3), 745–762. doi: 10.1007/s11661-010-0439-4
- R. S. Mishra and Z. Y. Ma: ‘Friction stir welding and processing’, Mater. Sci. Eng., 2005, 50, (1), 1–78. doi: 10.1016/j.mser.2005.07.001
- P. Edwards and M. Ramulu: ‘Effect of process conditions on superplastic forming behaviour in Ti–6Al–4V friction stir welds’, Sci. Technol. Weld. Join., 2009, 14, (7), 669–680. doi: 10.1179/136217109X12464549883330
- P. Edwards and M. Ramulu: ‘Peak temperatures during friction stir welding of Ti-6Al-4V’, Sci. Technol. Weld. Join., 2010, 15, (6), 468–472. doi: 10.1179/136217110X12665778348425
- S. Mironov, Y. Zhang, Y. S. Sato and H. Kokawa: ‘Development of grain structure in β-phase field during friction stir welding of Ti-6Al-4V alloy’, Scr. Mater., 2008, 59, 27–30. doi: 10.1016/j.scriptamat.2008.02.014